Siemens ET 200SP, El-Mod., F-DI 8x24VDC HF; 6ES7136-6BA00-0CA0

Siemens ET 200SP, El-Mod., F-DI 8x24VDC HF; 6ES7136-6BA00-0CA0

SIMATIC DP, Electronics module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508)...

Brand: Siemens
Šifra: 6ES7136-6BA00-0CA0
Dostupnost: Proveriti dostupnost
Cena na upit
SIMATIC DP, Electronics module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508)

General information
Product type designation F-DI 8x24VDC HF
usable BaseUnits BU type A0
Product function
● I&M data Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated from version V12
● STEP 7 configurable/integrated from version V5.5 SP3 / -
● PROFINET from GSD version/GSD revision V2.31
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 20.4 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
power supply according to NEC Class 2 required No
Input current
Current consumption (rated value) 75 mA; without load
Current consumption, max. 21 mA; From the backplane bus
Encoder supply
Number of outputs 8
Short-circuit protection Yes; Electronic (response threshold 0.7 A to 1.8 A)
Output current
● up to 60 °C, max. 0.3 A
24 V encoder supply
● 24 V Yes; min. L+ (-1.5 V)
● Short-circuit protection Yes
● Output current, max. 800 mA; Total current of all encoders
Power
Power available from the backplane bus 70 mW
Power loss
Power loss, typ. 4 W
Address area
Address space per module
● Inputs 6 byte
● Outputs 4 byte
Hardware configuration
Automatic encoding Yes
● Electronic coding element type F Yes
Digital inputs
Number of digital inputs 8
Source/sink input Yes; P-reading
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Input voltage
● Rated value (DC) 24 V
● for signal "0" -30 to +5 V
● for signal "1" +15 to +30 V
Input current
● for signal "1", typ. 3.7 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable Yes
— at "0" to "1", min. 0.4 ms
— at "0" to "1", max. 20 ms
— at "1" to "0", min. 0.4 ms
— at "1" to "0", max. 20 ms
for technological functions
— parameterizable No
Cable length
● shielded, max. 1 000 m
● unshielded, max. 500 m
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes
● Hardware interrupt No
Diagnostics indication LED
● RUN LED Yes; green LED
● ERROR LED Yes; red LED
● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Channel status display Yes; green LED
● for channel diagnostics Yes; red LED
● for module diagnostics Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels No
   


Slicni proizvodi:


Siemens ET 200SP, DI 8xNAMUR HF; 6ES7131-6TF00-0CA0

SIMATIC ET 200SP, digital input module, DI 8x NAMUR High Feature, suitable for BU type A0, Color code CC01, channel diagnostics
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 8x 24V DC Basic, PU 1; 6ES7131-6BF01-0AA0

SIMATIC ET 200SP, Digital input module, DI 8x 24V DC Basic, type 2 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 piece, fits to BU-type A0, Colour Code
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 8x24VDC HF, PU 1; 6ES7131-6BF00-0CA0

SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Feature, input type 3 (IEC 61131), sink input, (PNP, sink input) Packing unit: 1 unit, suitable for BU
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 8x24VDC High Speed; 6ES7131-6BF00-0DA0

SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Speed, Pack quantity: 1 unit, three alternative operating modes: DI, Oversampling, 4x counters, suitable
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 8x 24V DC ST, PU 1; 6ES7131-6BF01-0BA0

SIMATIC ET 200SP, Digital input module, DI 8x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 piece, fits to BU-type A0, Colour
-
In stock

(Na stanju)

 
 
6.308,54

Siemens ET 200SP, DI 16x 24V DC ST, PU 1; 6ES7131-6BH01-0BA0

SIMATIC ET 200SP, Digital input module, DI 16x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 Piece, fits to BU-type A0, Colour
-
Need to order

(Trenutno nema na stanju)

 
 
10.684,31

1
2
3
Uporedi proizvode Ukloni sve proizvode