Siemens ET 200SP, DI 8xNAMUR HF; 6ES7131-6TF00-0CA0
SIMATIC ET 200SP, digital input module, DI 8x NAMUR High Feature, suitable for BU type A0, Color code CC01, channel diagnostics...
Cena na upit
| SIMATIC ET 200SP, digital input module, DI 8x NAMUR High Feature, suitable for BU type A0, Color code CC01, channel diagnostics |
| General information | |
| Product type designation | DI 8xNAMUR HF |
| HW functional status | from FS04 |
| Firmware version | |
| ● FW update possible | Yes |
| usable BaseUnits | BU type A0 |
| Color code for module-specific color identification plate | CC01 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V13 / V13 |
| ● STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| ● PROFIBUS from GSD version/GSD revision | GSD Revision 5 |
| ● PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Operating mode | |
| ● DI | Yes |
| ● Counter | No |
| ● Oversampling | No |
| ● MSI | No |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Encoder supply | |
| Number of outputs | 8 |
| Short-circuit protection | Yes |
| 24 V encoder supply | |
| ● 24 V | No |
| ● Short-circuit protection | No |
| Power loss | |
| Power loss, typ. | 1.5 W |
| Address area | |
| Address space per module | |
| ● Address space per module, max. | 1 byte; + 1 byte for QI information |
| Hardware configuration | |
| Automatic encoding | |
| ● Type of mechanical coding element | Type A |
| Selection of BaseUnit for connection variants | |
| ● 1-wire connection | BU type A0 |
| ● 2-wire connection | BU type A0 |
| ● 3-wire connection | BU type A0 + external terminals |
| ● 4-wire connection | BU type A0 + external terminals |
| Digital inputs | |
| Number of digital inputs | 8; NAMUR |
| Digital inputs, parameterizable | Yes |
| Pulse extension | Yes; 0.5 s, 1 s, 2 s |
| Edge evaluation | Yes; rising edge, falling edge, edge change |
| Signal change flutter | Yes; 2 to 32 signal changes |
| Flutter observation window | Yes; 0.5 s, 1 s to 100 s in 1-s steps |
| Input voltage | |
| ● Rated value (DC) | 8.2 V |
| Input current | |
| for 10 k switched contact | |
| — for signal "0" | 0.35 to 1.2 mA |
| — for signal "1" | 2.1 to 7 mA |
| for unswitched contact | |
| — for signal "0", max. (permissible quiescent current) | 0.5 mA |
| — for signal "1" | typ. 8 mA |
| for NAMUR encoders | |
| — for signal "0", min. | 0.35 mA |
| — for signal "0", max. | 1.2 mA |
| — for signal "1", min. | 2.1 mA |
| — for signal "1", max. | 7 mA |
| Input delay (for rated value of input voltage) | |
| ● tolerated changeover time for changeover contacts | 300 ms |
| for standard inputs | |
| — parameterizable | No |
| for NAMUR inputs | |
| — at "0" to "1", max. | 12 ms |
| — at "1" to "0", max. | 12 ms |
| Cable length | |
| ● shielded, max. | 200 m |
| Encoder | |
Slicni proizvodi:
Siemens ET 200SP, El-Mod., F-DI 8x24VDC HF; 6ES7136-6BA00-0CA0
SIMATIC DP, Electronics module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508)
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, El-Mod., F-DI 8x24VDC HF; 6ES7136-6BA01-0CA0
SIMATIC DP, electronic module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PLe (ISO 13849-1)/ SIL3 (IEC 61508)
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, DI 8x 24V DC SRC BA; 6ES7131-6BF61-0AA0
SIMATIC ET 200SP, Digital input module, DI 8x 24V DC SRC BA, type 1 (IEC 61131), source Input (NPN, M-reading) Packing unit: 1 piece, fits to BU-type A0, Colour
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, DI 4x 120..230VvAC ST; 6ES7131-6FD01-0BB1
SIMATIC ET 200SP, Digital input module, DI 4x 120..230V AC Standard, type 3 (IEC 61131), Packing unit: 1 piece, fits to BU-type B1, Colour Code CC41, module dia
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP HA, EX-DI 4xNAMUR; 6DL1131-6TD00-0HX1
SIMATIC ET 200SP HA, ET 200SP, digital ex-i input module, DI 4xNAMUR, suitable for BaseUnit type X1, channel diagnostics
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, DI 16x 24V DC ST, PU 1; 6ES7131-6BH01-0BA0
SIMATIC ET 200SP, Digital input module, DI 16x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 Piece, fits to BU-type A0, Colour
-
(Trenutno nema na stanju)
10.684,31