Siemens ET 200SP, DI 8x 24V DC SRC BA; 6ES7131-6BF61-0AA0
SIMATIC ET 200SP, Digital input module, DI 8x 24V DC SRC BA, type 1 (IEC 61131), source Input (NPN, M-reading) Packing unit: 1 piece, fits to BU-type A0, Colour...
Cena na upit
| SIMATIC ET 200SP, Digital input module, DI 8x 24V DC SRC BA, type 1 (IEC 61131), source Input (NPN, M-reading) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC02, input delay time 0,05..20ms, module diagnostics for: supply voltage |
| General information | |
| Product type designation | DI 8x24 VDC SRC BA |
| HW functional status | From FS02 |
| Firmware version | V0.0 |
| ● FW update possible | No |
| usable BaseUnits | BU type A0 |
| Color code for module-specific color identification plate | CC02 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V14 |
| ● STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| ● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| ● PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Operating mode | |
| ● DI | Yes |
| ● Counter | No |
| ● Oversampling | No |
| ● MSI | No |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Encoder supply | |
| Short-circuit protection | No |
| Power loss | |
| Power loss, typ. | 1.5 W |
| Address area | |
| Address space per module | |
| ● Inputs | 1 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Type of mechanical coding element | type B |
| Selection of BaseUnit for connection variants | |
| ● 1-wire connection | BU type A0 |
| ● 2-wire connection | BU type A0 |
| ● 3-wire connection | BU type A0 with AUX terminals or potential distributor module |
| ● 4-wire connection | BU type A0 + Potential distributor module |
| Digital inputs | |
| Number of digital inputs | 8 |
| Digital inputs, parameterizable | Yes |
| Source/sink input | Sourcing |
| Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
| Input voltage | |
| ● Rated value (DC) | 24 V |
| ● for signal "0" | 30 V to -5 V (reference potential is L+) |
| ● for signal "1" | -11 V to -30 V (reference potential is L+) |
| Input current | |
| ● for signal "1", typ. | 6 mA |
| Input delay (for rated value of input voltage) | |
| for standard inputs | |
| — parameterizable | Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length) |
| — at "0" to "1", min. | 0.05 ms |
| — at "0" to "1", max. | 20 ms |
| — at "1" to "0", min. | 0.05 ms |
| — at "1" to "0", max. | 20 ms |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | 200 m |
| Encoder | |
| Connectable encoders | |
| ● 2-wire sensor | Yes |
| — permissible quiescent current (2-wire sensor), max. | 1.5 mA |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Alarms | |
| ● Diagnostic alarm | Yes |
| Diagnoses | |
| ● Diagnostic information readable | Yes |
| ● Monitoring the supply voltage | Yes |
| — parameterizable | Yes |
| ● Monitoring of encoder power supply | No |
Slicni proizvodi:
Siemens ET 200SP, El-Mod., F-DI 8x24VDC HF; 6ES7136-6BA00-0CA0
SIMATIC DP, Electronics module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508)
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, El-Mod., F-DI 8x24VDC HF; 6ES7136-6BA01-0CA0
SIMATIC DP, electronic module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PLe (ISO 13849-1)/ SIL3 (IEC 61508)
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, DI 4x 120..230VvAC ST; 6ES7131-6FD01-0BB1
SIMATIC ET 200SP, Digital input module, DI 4x 120..230V AC Standard, type 3 (IEC 61131), Packing unit: 1 piece, fits to BU-type B1, Colour Code CC41, module dia
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, DI 8x24VDC HF, PU 1; 6ES7131-6BF00-0CA0
SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Feature, input type 3 (IEC 61131), sink input, (PNP, sink input) Packing unit: 1 unit, suitable for BU
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, DI 8x24VDC High Speed; 6ES7131-6BF00-0DA0
SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Speed, Pack quantity: 1 unit, three alternative operating modes: DI, Oversampling, 4x counters, suitable
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, DI 8x 24VAC..48VUC BA, PU 1; 6ES7131-6CF00-0AU0
SIMATIC ET 200SP, digital input module, DI 8x 24 V AC..48 V UC Basic, packing quantity: 1 unit, suitable for BU type U0, color code CC20, module diagnostics
-
(Trenutno nema na stanju)
Cena na upit