Siemens ET 200SP, DI 8x 24VAC..48VUC BA, PU 1; 6ES7131-6CF00-0AU0

Siemens ET 200SP, DI 8x 24VAC..48VUC BA, PU 1; 6ES7131-6CF00-0AU0

SIMATIC ET 200SP, digital input module, DI 8x 24 V AC..48 V UC Basic, packing quantity: 1 unit, suitable for BU type U0, color code CC20, module diagnostics...

Brand: Siemens
Šifra: 6ES7131-6CF00-0AU0
Dostupnost: Proveriti dostupnost
Cena na upit
SIMATIC ET 200SP, digital input module, DI 8x 24 V AC..48 V UC Basic, packing quantity: 1 unit, suitable for BU type U0, color code CC20, module diagnostics

General information
Product type designation DI 8x24VAC/48VUC BA
HW functional status From FS02
Firmware version V0.0
● FW update possible No
usable BaseUnits BU type U0
Product function
● Isochronous mode No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version V15
● STEP 7 configurable/integrated from version V5.6
● PROFIBUS from GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision GSDML V2.3
Operating mode
● DI Yes
● Counter No
● Oversampling No
● MSI No
Supply voltage
Rated value (DC) 48 V
permissible range, lower limit (DC) 40.8 V
permissible range, upper limit (DC) 57.6 V
Rated value (AC) 48 V; 24 V/48 V; 50 Hz/60 Hz
permissible range, lower limit (AC) 40.8 V
permissible range, upper limit (AC) 52.8 V
Reverse polarity protection Yes
Input current
Current consumption, max. 70 mA; without sensor supply
Encoder supply
Number of outputs 8
Short-circuit protection Yes; Per module, 5x 20 mm fuse, 2 A/250 V, quick-response, replaceable
Output current
● up to 60 °C, max. 1 A
24 V encoder supply
● 24 V No
Power loss
Power loss, typ. 1.5 W
Address area
Address space per module
● Address space per module, max. 1 byte
Hardware configuration
Automatic encoding  
● Mechanical coding element Yes
● Type of mechanical coding element type C
Selection of BaseUnit for connection variants
● 1-wire connection BU type U0
● 2-wire connection BU type U0
● 3-wire connection BU type U0 + Potential distributor module
● 4-wire connection BU type U0 + Potential distributor module
Digital inputs
Number of digital inputs 8
Source/sink input P-reading
Input characteristic curve in accordance with IEC 61131, type 1 Yes
Input characteristic curve in accordance with IEC 61131, type 2 No
Input characteristic curve in accordance with IEC 61131, type 3 No
Pulse extension No
Input voltage
● for signal "0" AC/DC < 10 V
● for signal "1" AC > 14 V, DC > 34 V
Input current
● for signal "1", typ. 3.5 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable No
— at "0" to "1", max. 15 ms
— at "1" to "0", max. 20 ms
Cable length
● shielded, max. 1 000 m
● unshielded, max. 600 m
Encoder
Connectable encoders
● 2-wire sensor Yes
Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms

Slicni proizvodi:


Siemens ET 200SP, DI 8x24VDC HF, PU 1; 6ES7131-6BF00-0CA0

SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Feature, input type 3 (IEC 61131), sink input, (PNP, sink input) Packing unit: 1 unit, suitable for BU
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 8x24VDC High Speed; 6ES7131-6BF00-0DA0

SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Speed, Pack quantity: 1 unit, three alternative operating modes: DI, Oversampling, 4x counters, suitable
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, El-Mod., F-DI 8x24VDC HF; 6ES7136-6BA00-0CA0

SIMATIC DP, Electronics module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508)
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 8xNAMUR HF; 6ES7131-6TF00-0CA0

SIMATIC ET 200SP, digital input module, DI 8x NAMUR High Feature, suitable for BU type A0, Color code CC01, channel diagnostics
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 8x 24V DC Basic, PU 1; 6ES7131-6BF01-0AA0

SIMATIC ET 200SP, Digital input module, DI 8x 24V DC Basic, type 2 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 piece, fits to BU-type A0, Colour Code
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 8x 24V DC ST, PU 1; 6ES7131-6BF01-0BA0

SIMATIC ET 200SP, Digital input module, DI 8x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 piece, fits to BU-type A0, Colour
-
In stock

(Na stanju)

 
 
6.308,54

1
2
3
Uporedi proizvode Ukloni sve proizvode