Siemens ET 200SP, DI 8x 24V DC ST, PU 1; 6ES7131-6BF01-0BA0

Siemens ET 200SP, DI 8x 24V DC ST, PU 1; 6ES7131-6BF01-0BA0

SIMATIC ET 200SP, Digital input module, DI 8x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 piece, fits to BU-type A0, Colour...

Brand: Siemens
Šifra: 6ES7131-6BF01-0BA0
Dostupnost: Na stanju
Cena bez pdv-a: 6.308,54
Cena sa pdv-om: 7.570,25
SIMATIC ET 200SP, Digital input module, DI 8x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 piece, fits to BU-type A0, Colour Code CC01, input delay time 0,05..20ms, module diagnostics for: short-circuit of sensor supply, wire break, supply voltage

General information
Product type designation DI 8x24 VDC ST
HW functional status From FS02
Firmware version V0.0
● FW update possible No
usable BaseUnits BU type A0
Color code for module-specific color identification plate CC01
Product function
● I&M data Yes; I&M0 to I&M3
● Isochronous mode No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version V14
● STEP 7 configurable/integrated from version V5.5 SP3 or higher
● PCS 7 configurable/integrated from version V8.1 SP1
● PROFIBUS from GSD version/GSD revision One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision GSDML V2.3
Operating mode
● DI Yes
● Counter No
● Oversampling No
● MSI No
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
Input current
Current consumption, max. 50 mA; All channels are supplied from the encoder supply
Encoder supply
Number of outputs 8
Output voltage, min. 19.2 V
Short-circuit protection Yes; per module
24 V encoder supply
● 24 V Yes
● Short-circuit protection Yes
● Output current, max. 700 mA
● Output current per channel, max. 700 mA
● Output current per module, max. 700 mA
Power loss
Power loss, typ. 1 W; 24 V, 8 inputs supplied via encoder supply
Address area
Address space per module
● Inputs 1 byte; + 1 byte for QI information
Hardware configuration
Automatic encoding Yes
● Mechanical coding element Yes
● Type of mechanical coding element Type A
Selection of BaseUnit for connection variants
● 1-wire connection BU type A0
● 2-wire connection BU type A0
● 3-wire connection BU type A0 with AUX terminals or potential distributor module
● 4-wire connection BU type A0 + Potential distributor module
Digital inputs
Number of digital inputs 8
Digital inputs, parameterizable Yes
Source/sink input P-reading
Input characteristic curve in accordance with IEC 61131, type 3 Yes
Input voltage
● Rated value (DC) 24 V
● for signal "0" -30 to +5 V
● for signal "1" +11 to +30V
Input current
● for signal "1", typ. 2.5 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)
— at "0" to "1", min. 0.05 ms
— at "0" to "1", max. 20 ms
— at "1" to "0", min. 0.05 ms
— at "1" to "0", max. 20 ms
Cable length
● shielded, max. 1 000 m
● unshielded, max. 600 m

Slicni proizvodi:


Siemens ET 200SP, El-Mod., F-DI 8x24VDC HF; 6ES7136-6BA00-0CA0

SIMATIC DP, Electronics module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508)
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, El-Mod., F-DI 8x24VDC HF; 6ES7136-6BA01-0CA0

SIMATIC DP, electronic module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PLe (ISO 13849-1)/ SIL3 (IEC 61508)
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 8x 24V DC SRC BA; 6ES7131-6BF61-0AA0

SIMATIC ET 200SP, Digital input module, DI 8x 24V DC SRC BA, type 1 (IEC 61131), source Input (NPN, M-reading) Packing unit: 1 piece, fits to BU-type A0, Colour
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 4x 120..230VvAC ST; 6ES7131-6FD01-0BB1

SIMATIC ET 200SP, Digital input module, DI 4x 120..230V AC Standard, type 3 (IEC 61131), Packing unit: 1 piece, fits to BU-type B1, Colour Code CC41, module dia
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP HA, EX-DI 4xNAMUR; 6DL1131-6TD00-0HX1

SIMATIC ET 200SP HA, ET 200SP, digital ex-i input module, DI 4xNAMUR, suitable for BaseUnit type X1, channel diagnostics
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 16x 24V DC ST, PU 1; 6ES7131-6BH01-0BA0

SIMATIC ET 200SP, Digital input module, DI 16x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 Piece, fits to BU-type A0, Colour
-
Need to order

(Trenutno nema na stanju)

 
 
10.684,31

1
2
3
Uporedi proizvode Ukloni sve proizvode