Festo Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators...
Cena na upit
Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
- Distance of centre of gravity of payload to yoke plate xs
- 25 mm
- Stroke
- 30 mm
- Piston diameter
- 12 mm
- Type code
- DFM
- Drive unit operating mode
- Yoke
- Cushioning
- Elastic cushioning rings/pads at both ends
- Mounting position
- Any
- Guide
- Sliding guide
- Design
- Guide
- Position sensing
- For proximity sensor
- Symbol
- 00991737
- Operating pressure
- 0.2 MPa ... 1 MPa
- Operating pressure
- 2 bar ... 10 bar
- Max. speed
- 0.8 m/s
- Mode of operation
- Double-acting
- Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
- Information on operating and pilot media
- Operation with oil lubrication possible (required for further use)
- Corrosion resistance class (CRC)
- 1 - Low corrosion stress
- Ambient temperature
- -20 °C ... 80 °C
- Impact energy in the end positions
- 0.07 J
- Max. permissible torque load Mx as a function of the stroke
- 0.45 Nm
- Max. payload as a function of the stroke at defined distance xs
- 21 N
- Theoretical force at 6 bar, retracting
- 51 N
- Theoretical force at 6 bar, advancing
- 68 N
- Moving mass
- 200 g
- Product weight
- 435 g
- Alternative connections
- See product drawing
- Pneumatic connection
- M5
- Note on materials
- RoHS-compliant
- Cover material
- Wrought aluminum alloy
- Seals material
- NBR
- Housing material
- Wrought aluminum alloy
- Piston rod material
- High-alloy stainless steel
Slicni proizvodi:
Festo ISO cylinder DSBC-50-400-PPVA-N3 ; 1366958
ISO profile cylinder to ISO 15552 with a wide range of mounting options. DSBC-50-400-PPVA-N3 Part no. 1366958 ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DSBC-...-80- - ; 1463495
Cylinder with clamping unit, ISO. Festo Cylinder DSBC-...-80- -
-
(Trenutno nema na stanju)
Cena na upit
Festo Round cylinder DSNU-32 ; 193992
Long-lasting cylinder based on ISO 6432 with self-adjusting end-position cushioning and extensive accessories Wide range of variants for customized applications
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DSNU-20-50-P-A ; 19210
Long-lasting cylinder based on ISO 6432 with self-adjusting end-position cushioning and extensive accessories. DSNU-20-50-P-A Part no. 19210 Wide range of variants
-
(Trenutno nema na stanju)
Cena na upit
Festo Compact air cylinder DPDM-...-25- - ; 4328892
Compact due to being shorter and lighter and variety of ways it can be screwed on directly. Fixed cushioning, with non-rotating or through piston rod, single or
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder CRDNG-32- -PPV-A ; 160884
Corrosion resistant against aggressive ambient conditions. Variant models: through piston rod; heat-resistant version. CRDNG-32- -PPV-A Part no. 160884 ISO 15552
-
(Trenutno nema na stanju)
Cena na upit