Festo ISO cylinder DSBC-50-400-PPVA-N3 ; 1366958
ISO profile cylinder to ISO 15552 with a wide range of mounting options. DSBC-50-400-PPVA-N3 Part no. 1366958 ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic...
Cena na upit
ISO profile cylinder to ISO 15552 with a wide range of mounting options.
DSBC-50-400-PPVA-N3 Part no. 1366958
- ISO 15552 (ISO 6431, VDMA 24562)
- Self-adjusting pneumatic end-position cushioning which adapts optimally to changes in load and speed
- Standard profile with two sensor slots
- Wide range of variants for customized applications
- Comprehensive range of mounting accessories for just about every type of installation
- Magnetic piston for position sensing
- Stroke
- 400 mm
- Piston diameter
- 50 mm
- Piston rod thread
- M16x1.5
- Type code
- DSBC
- Cushioning
- Pneumatic cushioning, adjustable at both ends
- Mounting position
- Any
- Conforms to standard
- ISO 15552
- Piston rod end
- External thread
- Design
-
Profile barrel
Piston
Piston rod - Position sensing
- For proximity sensor
- Symbol
- 00991235
- Variants
- Piston rod at one end
- Operating pressure
- 0.4 bar ... 12 bar
- Mode of operation
- Double-acting
- Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
- Information on operating and pilot media
- Operation with oil lubrication possible (required for further use)
- Corrosion resistance class (CRC)
- 2 - Moderate corrosion stress
- Ambient temperature
- -20 °C ... 80 °C
- Impact energy in the end positions
- 1 J
- Cushioning length
- 22 mm
- Theoretical force at 6 bar, retracting
- 990 N
- Theoretical force at 6 bar, advancing
- 1178 N
- Moving mass at 0 mm stroke
- 365 g
- Additional weight per 10 mm stroke
- 56 g
- Basic weight with 0 mm stroke
- 1190 g
- Additional moving mass per 10 mm stroke
- 25 g
- Type of mounting
-
With accessories
Optionally:
With internal thread - Pneumatic connection
- G1/4
- Note on materials
- RoHS-compliant
- Cover material
-
Die-cast aluminum
Coated - Seals material
- TPE-U(PU)
- Piston rod material
- High-alloy steel
- Material of cylinder barrel
-
Wrought aluminum alloy
Smooth anodized
-
DSBC ENUS
Slicni proizvodi:
Festo ISO cylinder DSBC-...-80- - ; 1463495
Cylinder with clamping unit, ISO. Festo Cylinder DSBC-...-80- -
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder CRDSNU-B-16-40-P-A-MG-A1 ; 8073761
With NSF-H1 grease and a clean design. Very reliable and durable due to dry-running seal. And always correctly adjusted thanks to the self-adjusting end position
-
(Trenutno nema na stanju)
Cena na upit
Festo Cartridge cylinder EGZ-10-5 ; 15036
Through-hole screw-in short single-acting cylinder. Minimal fitting space Installation with or without mounting components External piston rod thread
-
(Trenutno nema na stanju)
Cena na upit
Festo Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder to ISO 21287 ADN ; 536203
ADN-12-100-A-P-A ISO cylinder to ISO 21287 for fixed or self-adjusting cushioning with high variance. ISO 21287 Up to 50% less installation space than comparable
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DNC-80- - ; 163430
Mounting hole pattern to ISO 15552 Assembled and fitted with tubing ready for connection Particularly suitable for decentralized use in larger systems Valve variants:
-
(Trenutno nema na stanju)
Cena na upit