Siemens ET 200SP, F-DQ 8x 24VDC/0.5A PP; 6ES7136-6DC00-0CA0

Siemens ET 200SP, F-DQ 8x 24VDC/0.5A PP; 6ES7136-6DC00-0CA0

SIMATIC DP, Electronics module ET 200SP, F-DQ 8XDC 24V0.5A PP, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)...

Brand: Siemens
Šifra: 6ES7136-6DC00-0CA0
Dostupnost: Proveriti dostupnost
Cena na upit
SIMATIC DP, Electronics module ET 200SP, F-DQ 8XDC 24V0.5A PP, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)

General information
Product type designation F-DQ 8x24 V DC/0.5 A PP HF
Firmware version  
● FW update possible Yes
usable BaseUnits BU type A0
Color code for module-specific color identification plate CC02
Product function
● I&M data Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated from version V14 SP1 with HSP 202
● STEP 7 configurable/integrated from version V5.5 SP4 HF5
● PROFINET from GSD version/GSD revision V2.31
Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes
power supply according to NEC Class 2 required No
Input current
Current consumption (rated value) 75 mA; without load
Current consumption, max. 21 mA; From the backplane bus
output voltage / header
Rated value (DC) 24 V
Power
Power available from the backplane bus 70 mW
Power loss
Power loss, typ. 3 W
Address area
Address space per module
● Inputs 6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA
● Outputs 6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA
Hardware configuration
Automatic encoding Yes
● Electronic coding element type F Yes
Digital outputs
Type of digital output Transistor
Number of digital outputs 8
Digital outputs, parameterizable Yes
Short-circuit protection Yes
● Response threshold, typ. Min. 0.7 A
Open-circuit detection No
Limitation of inductive shutdown voltage to Typ. -39 V
Controlling a digital input Yes
Switching capacity of the outputs
● with resistive load, max. 0.5 A
● on lamp load, max. 2 W
Load resistance range
● lower limit 48 Ω
● upper limit 12 000 Ω
Output voltage
● for signal "1", min. 24 V; L+ (-0.5 V)
Output current
● for signal "1" rated value 0.5 A
● for signal "0" residual current, max. 0.5 mA
Switching frequency
● with resistive load, max. 30 Hz; Symmetrical
● with inductive load, max. 0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical
● with capacitive load, max. 2 Hz; Symmetrical
● on lamp load, max. 10 Hz; Symmetrical
Total current of the outputs
● Current per channel, max. 0.5 A; note derating data in the manual
● Current per module, max. 3 A; note derating data in the manual
Total current of the outputs (per module)
horizontal installation
— up to 40 °C, max. 3 A
— up to 50 °C, max. 2.5 A
— up to 60 °C, max. 2 A
vertical installation
— up to 50 °C, max. 2 A
Cable length
● shielded, max. 100 m
● unshielded, max. 100 m
Interrupts/diagnostics/status information
Diagnostics function Yes
Substitute values connectable

Slicni proizvodi:


Siemens ET 200SP, DQ 8x 24V DC/0,5A ST, PU 1; 6ES7132-6BF01-0BA0

SIMATIC ET 200SP, Digital output module, DQ 8x 24V DC/0,5A Standard, Source output (PNP,P-switching) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC02,
-
In stock

(Na stanju)

Cena na upit

Siemens ET 200SP, DQ 16X24VDC/0,5A BA, PU 1; 6ES7132-6BH00-0AA0

SIMATIC ET 200SP, digital output module, DQ 16x 24VDC/0.5A Basic, Pack quantity: 1 unit, suitable for BU type A0, Color code CC00, Module diagnostics
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DQ 8x24VDC/0,5A HF, PU 1; 6ES7132-6BF00-0CA0

SIMATIC ET 200SP, digital output module, DQ 8x 24VDC/0.5A High Feature, source output PNP, source output, Packing unit: 1 unit, suitable for BU type A0, color code
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, RQ NO 4x 120VDC..230VAC/5A,PU1; 6ES7132-6HD01-0BB1

SIMATIC ET 200SP, Relay module, RQ NO 4x 120V DC..230VAC/5A ST. 4 normally open contacts, isolated contacts, packing unit: 1 piece, fits to BU-type B0 and B1, Colour
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP,RQ NO-mA 4x120VDC..230VAC/5A ST; 6ES7132-6MD00-0BB1

SIMATIC ET 200SP, relay module normally open, RQ NO-MA4x120VDC..230VAC/5A ST, with manual operation, packing unit VPE 1, suitable for BU type B0 or B1, Module d
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DQ 16x 24V DC/0,5A ST, PU 1; 6ES7132-6BH01-0BA0

SIMATIC ET 200SP, Digital output module, DQ 16x 24V DC/0,5A Standard, Source output (PNP,P-switching) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC00,
-
In stock

(Na stanju)

 
 
12.461,89

1
2
3
Uporedi proizvode Ukloni sve proizvode