Siemens ET 200SP, El-Mod., F-DQ 4xDC 24V/2A; 6ES7136-6DB00-0CA0
SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)...
Cena na upit
| SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508) |
| General information | |
| Product type designation | F-DQ 4x24 V DC/2A HF |
| usable BaseUnits | BU type A0 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V12 |
| ● STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| ● PROFINET from GSD version/GSD revision | V2.31 |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| power supply according to NEC Class 2 required | No |
| Input current | |
| Current consumption (rated value) | 75 mA; without load |
| Current consumption, max. | 21 mA; From the backplane bus |
| output voltage / header | |
| Rated value (DC) | 24 V |
| Power | |
| Power available from the backplane bus | 70 mW |
| Power loss | |
| Power loss, typ. | 4 W |
| Address area | |
| Address space per module | |
| ● Inputs | 5 byte |
| ● Outputs | 5 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Electronic coding element type F | Yes |
| Digital outputs | |
| Type of digital output | Transistor |
| Number of digital outputs | 4 |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | Yes |
| ● Response threshold, typ. | > 3.3 A |
| Open-circuit detection | Yes |
| ● Response threshold, typ. | 8 mA |
| Overload protection | Yes |
| ● Response threshold, typ. | 2.9 A |
| Limitation of inductive shutdown voltage to | Typ. -2x 47 V |
| Switching capacity of the outputs | |
| ● with resistive load, max. | 2 A |
| ● on lamp load, max. | 10 W |
| Load resistance range | |
| ● lower limit | 12 Ω |
| ● upper limit | 2 000 Ω |
| Output voltage | |
| ● for signal "1", min. | 24 V; L+ (-0.5 V) |
| Output current | |
| ● for signal "1" rated value | 2 A |
| ● for signal "0" residual current, max. | 0.5 mA |
| Switching frequency | |
| ● with resistive load, max. | 30 Hz; Symmetrical |
| ● with inductive load, max. | 0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical |
| ● on lamp load, max. | 10 Hz; Symmetrical |
| Total current of the outputs | |
| ● Current per channel, max. | 2 A; note derating data in the manual |
| ● Current per module, max. | 6 A; note derating data in the manual |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | 500 m |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Substitute values connectable | No |
| Alarms | |
| ● Diagnostic alarm | Yes |
| Diagnostics indication LED | |
| ● RUN LED | Yes; green LED |
| ● ERROR LED | Yes; red LED |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| ● Channel status display | Yes; green LED |
| ● for channel diagnostics | Yes; red LED |
Slicni proizvodi:
Siemens ET 200SP, RQ NO 4x 120VDC..230VAC/5A,PU1; 6ES7132-6HD01-0BB1
SIMATIC ET 200SP, Relay module, RQ NO 4x 120V DC..230VAC/5A ST. 4 normally open contacts, isolated contacts, packing unit: 1 piece, fits to BU-type B0 and B1, Colour
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP,RQ NO-mA 4x120VDC..230VAC/5A ST; 6ES7132-6MD00-0BB1
SIMATIC ET 200SP, relay module normally open, RQ NO-MA4x120VDC..230VAC/5A ST, with manual operation, packing unit VPE 1, suitable for BU type B0 or B1, Module d
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, F-DQ 8x 24VDC/0.5A PP; 6ES7136-6DC00-0CA0
SIMATIC DP, Electronics module ET 200SP, F-DQ 8XDC 24V0.5A PP, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, DQ 4x24..230VAC/2A ST; 6ES7132-6FD00-0BB1
SIMATIC ET 200SP, digital output module, DQ 4x 24..230V AC/2A Standard suitable for BU type B1, Color code CC41, Module diagnostics
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, RQ CO 4x 24V DC/2A ST, VPE 1; 6ES7132-6GD51-0BA0
SIMATIC ET 200SP, Signal relay module, RQ CO 4x 24V DC/2A ST, 4 changeover contacts, isolated contacts, packing unit: 1 piece, fits to BU-type A0, Colour Code CC00,
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, DQ 8x24VDC/0,5A HF, PU 1; 6ES7132-6BF00-0CA0
SIMATIC ET 200SP, digital output module, DQ 8x 24VDC/0.5A High Feature, source output PNP, source output, Packing unit: 1 unit, suitable for BU type A0, color code
-
(Trenutno nema na stanju)
Cena na upit