Siemens ET 200SP, F-AI 4xU 0..10V HF; 6ES7136-6AB00-0CA1
SIMATIC DP, electronics module ET 200SP, F-AI 4xU 0..10V HF, fail-safe analog inputs, up to PL E (ISO 13849), up to SIL 3 (IEC 61508)...
Cena na upit
| SIMATIC DP, electronics module ET 200SP, F-AI 4xU 0..10V HF, fail-safe analog inputs, up to PL E (ISO 13849), up to SIL 3 (IEC 61508) |
| General information | |
| Product type designation | F-AI 4XU 0..10V HF |
| Firmware version | |
| ● FW update possible | Yes |
| usable BaseUnits | BU type A0, A1 |
| Color code for module-specific color identification plate | CC00 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V16 with HSP 308 |
| Operating mode | |
| ● cyclic measurement | Yes |
| ● Oversampling | No |
| ● MSI | No |
| CiR - Configuration in RUN | |
| Reparameterization possible in RUN | No |
| Calibration possible in RUN | No |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| power supply according to NEC Class 2 required | No |
| Input current | |
| Current consumption (rated value) | 0.38 A |
| Current consumption, max. | 0.4 A |
| Encoder supply | |
| 24 V encoder supply | |
| ● 24 V | Yes; min. L+ (-1.5 V) |
| ● Short-circuit protection | Yes |
| ● Output current, max. | 300 mA; total current of all encoders/channels |
| Power | |
| Power available from the backplane bus | 70 mW |
| Power loss | |
| Power loss, typ. | 2 W |
| Address area | |
| Address space per module | |
| ● Inputs | 14 byte; S7-300/400F CPU, 13 byte |
| ● Outputs | 5 byte; S7-300/400F CPU, 4 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Electronic coding element type H | Yes |
| Analog inputs | |
| Number of analog inputs | 4 |
| ● For voltage measurement | 4 |
| permissible input voltage for voltage input (destruction limit), max. | 36 V |
| Input ranges (rated values), voltages | |
| ● 0 to +10 V | Yes |
| — Input resistance (0 to 10 V) | 16 kΩ |
| Cable length | |
| ● shielded, max. | 200 m |
| Analog value generation for the inputs | |
| Measurement principle | Sigma Delta |
| Integration and conversion time/resolution per channel | |
| ● Resolution with overrange (bit including sign), max. | 16 bit |
| ● Integration time, parameterizable | Yes |
| ● Integration time (ms) | 20 / 16,667 |
| ● Interference voltage suppression for interference frequency f1 in Hz | 50 / 60 Hz |
| Smoothing of measured values | |
| ● Number of smoothing levels | 7 |
| ● parameterizable | Yes |
| ● Step: None | Yes; 1x conversion cycle time |
| ● Step: low | Yes; 2x / 4x conversion cycle time |
| ● Step: Medium | Yes; 8x / 16x conversion cycle time |
| ● Step: High | Yes; 32x / 64x conversion cycle time |
| ● Average value filter | Yes |
| Encoder | |
| Connection of signal encoders | |
| ● for voltage measurement | Yes |
| Errors/accuracies | |
| Linearity error (relative to input range), (+/-) | 0.1 % |
| Temperature error (relative to input range), (+/-) | 0.023 %/K |
| Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) | 0.1 % |
| Operational error limit in overall temperature range | |
| ● Voltage, relative to input range, (+/-) | |
Slicni proizvodi:
Siemens ET 200SP, AI 8xRTD/TC 2-Wire HF; 6ES7134-6JF00-0CA1
SIMATIC ET 200SP, Analog input module, AI 8xRTD/TC 2-wire High Feature suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.1%
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP AI 2 X U/I 2-, 4-Wire HF; 6ES7134-6HB00-0CA1
SIMATIC ET 200SP, Analog input module, AI 2x U/I 2-.4-wire High Feat., suitable for BU type A0, A1, Color code CC05, channel diagnostics, 16 bit, +/-0.1%
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP AI Energy Meter CT ST; 6ES7134-6PA01-0BU0
SIMATIC ET 200SP, analog input module, AI Energy Meter CT ST, for 1A or 5A current transformer, suitable for BU type U0, channel diagnostics
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP AI Energy Meter RC ST; 6ES7134-6PA21-0BU0
SIMATIC ET 200SP, analog input module, AI Energy Meter RC ST, for Rogowski coils or current/voltage transformer 333 mV, suitable for BU type U0, channel diagnos
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP AI Energy Meter CT HF; 6ES7134-6PA01-0CU0
SIMATIC ET 200SP, analog input module, AI Energy Meter CT HF, for 1A or 5A current transformer, with network analysis functions, suitable for BU type U0, channel
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP AI Energy Meter RC HF; 6ES7134-6PA21-0CU0
SIMATIC ET 200SP, analog input module, AI Energy Meter RC HF, for Rogowski coils or current/voltage transformer 333 mV, with network analysis functions, suitable
-
(Trenutno nema na stanju)
Cena na upit