Siemens ET 200SP, AI 2xI 2-/4-Wire ST, PU 1; 6ES7134-6GB00-0BA1
SIMATIC ET 200SP, Analog input module, AI 2xI 2-/4-wire Standard, Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC05, Module diagnostics, 16 bi...
Cena bez pdv-a: 18.203,76 |
Cena sa pdv-om: 21.844,52 |
SIMATIC ET 200SP, Analog input module, AI 2xI 2-/4-wire Standard, Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC05, Module diagnostics, 16 bit |
General information | |
Product type designation | AI 2xI 2-/4-wire ST |
HW functional status | from FS04 |
Firmware version | |
● FW update possible | Yes |
usable BaseUnits | BU type A0, A1 |
Color code for module-specific color identification plate | CC05 |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Isochronous mode | No |
● Measuring range scalable | No |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated from version | V13 SP1 |
● STEP 7 configurable/integrated from version | V5.5 SP3 |
● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
● PROFINET from GSD version/GSD revision | V2.3 / - |
Operating mode | |
● Oversampling | No |
● MSI | No |
CiR - Configuration in RUN | |
Reparameterization possible in RUN | Yes |
Calibration possible in RUN | No |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current | |
Current consumption, max. | 45 mA; without sensor supply |
Encoder supply | |
24 V encoder supply | |
● 24 V | Yes |
● Short-circuit protection | Yes |
● Output current, max. | 50 mA; Total current for both channels (two-wire) |
Additional 24 V encoder supply | |
● 24 V | Yes |
● Short-circuit protection | Yes; Module-wise |
● Output current, max. | 200 mA; Total current for both channels (four-wire) |
Power loss | |
Power loss, typ. | 1.1 W |
Address area | |
Address space per module | |
● Address space per module, max. | 4 byte; + 1 byte for QI information |
Hardware configuration | |
Automatic encoding | Yes |
● Mechanical coding element | Yes |
● Type of mechanical coding element | Type A |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0, A1 |
● 2-wire connection | BU type A0, A1 |
● 4-wire connection | BU type A0, A1 |
Analog inputs | |
Number of analog inputs | 2 |
● For current measurement | 2 |
permissible input current for current input (destruction limit), max. | 50 mA |
Cycle time (all channels), min. | 500 µs |
Input ranges (rated values), currents | |
● 0 to 20 mA | Yes; 15 bit |
— Input resistance (0 to 20 mA) | 130 Ω; 90 ohms with two wires |
● -20 mA to +20 mA | Yes; 16 bit incl. sign |
— Input resistance (-20 mA to +20 mA) | 130 Ω |
● 4 mA to 20 mA | Yes; 15 bit |
— Input resistance (4 mA to 20 mA) | 130 Ω; 90 ohms with two wires |
Cable length | |
● shielded, max. | 1 000 m |
Analog value generation for the inputs | |
Measurement principle | Sigma Delta |
Integration and conversion time/resolution per channel | |
● Resolution with overrange (bit including sign), max. | 16 bit |
● Integration time, parameterizable | Yes |
● Interference voltage suppression for interference frequency f1 in Hz | 16.6 / 50 / 60 Hz / off |
● Conversion time (per channel) | 50 ms @ 60 Hz, 60 ms @ 50 Hz, 180 ms @ 16.6 Hz, 500 µs without filter |
Smoothing of measured values | |
● Number of smoothing levels |
Slicni proizvodi:
Siemens ET 200SP, F-AI 4xU 0..10V HF; 6ES7136-6AB00-0CA1
SIMATIC DP, electronics module ET 200SP, F-AI 4xU 0..10V HF, fail-safe analog inputs, up to PL E (ISO 13849), up to SIL 3 (IEC 61508)
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP AI 2 X SG 4-/6-WIRE HS; 7MH4134-6LB00-0DA0
SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 2 X SG 4-/6-WIRE HIGH SPEED, FITS TO BU-TYPE A0, COLOR CODE CC00, CHANNEL DIAGNOSIS, 28/16BIT, +/-0,05%, FOR STRAIN GAUGE
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP HA, EX-AI 2xI 2-WIRE HART; 6DL1134-6TB00-0HX1
SIMATIC ET 200SP HA, ET 200SP, analog ex-i HART input module, Ex-AI 2xI 2-Wire HART, suitable for BaseUnit type X1, channel diagnostics, 16bit, +/-0.3%
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, AI 4xRTD/TC 2-/3-/4-Wire HF; 6ES7134-6JD00-0CA1
SIMATIC ET 200SP, Analog input module, AI 4xRTD/TC High Feature, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.1%, 2-/3-/4-wir
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, AI 4xU/I 2-Wire ST, PU 1; 6ES7134-6HD01-0BA1
SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 4XU/I 2-WIRE STANDARD, PACKING UNIT: 1 PIECE, FITS TO BU-TYPE A0, A1, COLOR CODE CC03, MODULE DIAGNOSIS, 16BIT, +/-0,3
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, AI 4XI 2-/4-Wire ST, PU 1; 6ES7134-6GD01-0BA1
SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 4XI 2-/4-WIRE STANDARD, PACKING UNIT: 1 PIECE, FITS TO BU-TYPE A0, A1, COLOR CODE CC03, MODULE DIAGNOSIS, 16BIT, +/-0,
-
(Na stanju)
21.867,09