Festo ISO cylinder to ISO 21287 ADN ; 536203

Festo ISO cylinder to ISO 21287 ADN ; 536203

ADN-12-100-A-P-A ISO cylinder to ISO 21287 for fixed or self-adjusting cushioning with high variance. ISO 21287 Up to 50% less installation space than comparable...

Brand: festo
Šifra: 536203
Dostupnost: Proveriti dostupnost
Cena na upit
ADN-12-100-A-P-A

ISO cylinder to ISO 21287 for fixed or self-adjusting cushioning with high variance.

  • ISO 21287
  • Up to 50% less installation space than comparable ISO cylinders to ISO 15552
  • Piston rod with internal or external thread
  • Wide range of variants for customized applications
  • Magnetic piston for position sensing

Stroke
1 mm ... 300 mm
Piston diameter
12 mm
Type code
ADN
Based on norm
ISO 21287
Cushioning
Elastic cushioning rings/pads at both ends
Mounting position
Any
Design
Piston
Piston rod
Profile barrel
Position sensing
For proximity sensor
Variants
Low friction
High corrosion protection
Constant, slow movement
Heat-resistant seals max. 120°C
Extended external thread piston rod
Through piston rod
Piston rod at one end
Extended piston rod
With anti-twist protection
Special thread on piston rod
Explosion protection certification (ATEX)
Laser etched rating plate
Operating pressure
1 bar ... 10 bar
Mode of operation
Double-acting
ATEX category gas
II 2G
Type of ignition protection for gas
c T4
ATEX category for dust
II 2D
Type of (ignition) protection for dust
c 120°C
Explosive ambient temperature
-20°C <= Ta <= +60°C
Explosion prevention and protection
Zone 22 (ATEX)
Zone 21 (ATEX)
Zone 2 (ATEX)
Zone 1 (ATEX)
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
3 - High corrosion stress
Ambient temperature
-20 °C ... 120 °C
Theoretical force at 6 bar, retracting
51 N
Theoretical force at 6 bar, advancing
51 N ... 68 N
Moving mass at 0 mm stroke
9 g
Additional weight per 10 mm stroke
12 g
Basic weight with 0 mm stroke
77 g
Additional moving mass per 10 mm stroke
2 g
Type of mounting
With through-hole
With accessories
Optionally:
With internal thread
Pneumatic connection
M5
Note on materials
RoHS-compliant
Cover material
Anodized
Aluminum
Piston rod material
High-alloy steel
Material of cylinder barrel
Wrought aluminum alloy
Smooth anodized

Product Support

  • 536203datasheet

    536203datasheet

  • ADN ENUS

    ADN ENUS

  • D15000100121745

    D15000100121745



Slicni proizvodi:


Festo ISO cylinder DSBC-40-100-PPVA-N3 ; 1376660

ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic end-position cushioning which adapts optimally to changes in load and speed Standard profile with two sensor
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Festo ISO cylinder DSBC-50-80-PPVA-N3 ; 1366951

ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic end-position cushioning which adapts optimally to changes in load and speed Standard profile with two sensor
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Festo ISO cylinder DSBC-32-50-PPVA-N3 ; 1376424

ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic end-position cushioning which adapts optimally to changes in load and speed Standard profile with two sensor
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Festo ISO cylinder DSBC-50-50-PPVA-N3 ; 1366950

ISO profile cylinder to ISO 15552 with a wide range of mounting options. SO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic end-position cushioning which adapts
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Festo ISO cylinder DSNU-25-25-PPV-A ; 33975

Long-lasting cylinder based on ISO 6432 with self-adjusting end-position cushioning and extensive accessories. Wide range of variants for customized applications
-
Need to order

(Trenutno nema na stanju)

Cena na upit

Festo Profile cylinder to ISO 15552 DSBC ; 1463250

DSBC-Q-32-40-PPSA-N3 ISO profile cylinder to ISO 15552 with clamping fixture for the piston rod. A wide range of mounting options. Without additional measures for
-
Need to order

(Trenutno nema na stanju)

Cena na upit

1
2
3
Uporedi proizvode Ukloni sve proizvode