Siemens ET 200SP, Powermod. F-PM-E PPM, 24V DC; 6ES7136-6PA00-0BC0
SIMATIC DP, POWER M. F-PM-E PPM PROFIsafe, for ET 200SP; 24 V DC safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3 2 for safe dig. inputs 1 for safe dig....
Cena na upit
| SIMATIC DP, POWER M. F-PM-E PPM PROFIsafe, for ET 200SP; 24 V DC safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3 2 for safe dig. inputs 1 for safe dig. output PPM |
| General information | |
| Product type designation | F-PM-E 24 V DC/8 A PPM ST |
| usable BaseUnits | BU type C0 |
| Color code for module-specific color identification plate | CC52 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V12 |
| ● STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| ● PROFINET from GSD version/GSD revision | V2.31 |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 20.4 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Input current | |
| Current consumption (rated value) | 75 mA; without load |
| Current consumption, max. | 21 mA; From the backplane bus |
| output voltage / header | |
| Rated value (DC) | 24 V |
| Encoder supply | |
| Number of outputs | 2 |
| Short-circuit protection | Yes; Electronic (response threshold 0.7 A to 2.1 A) |
| Output current | |
| ● up to 60 °C, max. | 0.3 A |
| 24 V encoder supply | |
| ● 24 V | Yes; min. L+ (-1.5 V) |
| ● Short-circuit protection | Yes |
| ● Output current, max. | 600 mA; Total current of all encoders |
| Power | |
| Power available from the backplane bus | 70 mW |
| Power loss | |
| Power loss, typ. | 5 W |
| Address area | |
| Address space per module | |
| ● Inputs | 7 byte |
| ● Outputs | 5 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Electronic coding element type F | Yes |
| Digital inputs | |
| Number of digital inputs | 2 |
| Source/sink input | Yes; P-reading |
| Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
| Input voltage | |
| ● Type of input voltage | DC |
| ● Rated value (DC) | 24 V |
| ● for signal "0" | -30 to +5 V |
| ● for signal "1" | +15 to +30 V |
| Input current | |
| ● for signal "1", typ. | 3.7 mA |
| Input delay (for rated value of input voltage) | |
| for standard inputs | |
| — parameterizable | Yes |
| — at "0" to "1", min. | 0.4 ms |
| — at "0" to "1", max. | 20 ms |
| — at "1" to "0", min. | 0.4 ms |
| — at "1" to "0", max. | 20 ms |
| for technological functions | |
| — parameterizable | No |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | 500 m |
| Digital outputs | |
| Number of digital outputs | 1 |
| Short-circuit protection | Yes |
| ● Response threshold, typ. | > 14.8 A |
| Open-circuit detection | Yes |
| ● Response threshold, typ. | 8 mA |
| Overload protection | Yes |
| ● Response threshold, typ. | 8.8 A |
| Limitation of inductive shutdown voltage to | Max. -1.5 V |
| Switching capacity of the outputs | |
| ● with resistive load, max. | 8 A |
| ● on lamp load, max. | |
Slicni proizvodi:
Siemens ET 200SP HA, Ex-PM E POWER MODULE; 6DL1133-6PX00-0HW0
SIMATIC ET 200SP HA, ET 200SP, Power module Ex-PM E, 24V 0.8A, WxH: 50mm x 117mm, suitable for BaseUnit type W0
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, F-AI 4XI (0)4..20mA HF; 6ES7136-6AA00-0CA1
SIMATIC DP, ELECTRONIC MODULE ET 200SP, F-AI 4xI(0)4..20mA HF FAILSAFE ANALOG INPUTS up to PL E (ISO 13849) up to SIL 3 (IEC 61508)
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP AI Energy Meter RC ST; 6ES7134-6PA21-0BU0
SIMATIC ET 200SP, analog input module, AI Energy Meter RC ST, for Rogowski coils or current/voltage transformer 333 mV, suitable for BU type U0, channel diagnos
-
(Trenutno nema na stanju)
Cena na upit
Siemens BaseUnit Type A0, BU15-P16+A0+2B; 6ES7193-6BP00-0BA0
SIMATIC ET 200SP, BaseUnit BU15-P16+A0+2B, BU type A0, Push-in terminals, without AUX terminals, bridged to the left, WxH: 15x 117 mm
-
(Na stanju)
1.903,38
Siemens BaseUnit Type A0, BU15-P16+A10+2B; 6ES7193-6BP20-0BA0
SIMATIC ET 200SP, BaseUnit BU15-P16+A10+2B, BU type A0, Push-in terminals, with 10 AUX terminals, bridged to the left, WxH: 15 mmx141 mm
-
(Na stanju)
2.553,00
Siemens BaseUnit Type A0, BU15-P16+A0+2D; 6ES7193-6BP00-0DA0
SIMATIC ET 200SP, BaseUnit BU15-P16+A0+2D, BU type A0, push-in terminals, without aux. terminals, new load group, WxH: 15x 117 mm
-
(Trenutno nema na stanju)
3.373,00