Siemens ET 200SP HA, EX-AQ 2xI HART; 6DL1135-6TB00-0HX1
SIMATIC ET 200SP HA, ET 200SP, analog Ex-i HART output module, Ex-AQ 2xI HART, suitable for BaseUnit type X1, channel diagnostics, 16-bit, +/-0.3%...
Cena na upit
| SIMATIC ET 200SP HA, ET 200SP, analog Ex-i HART output module, Ex-AQ 2xI HART, suitable for BaseUnit type X1, channel diagnostics, 16-bit, +/-0.3% |
| General information | |
| Product type designation | Ex-AQ 2xI HART |
| Firmware version | V1.0 |
| ● FW update possible | Yes |
| usable BaseUnits | BU type X1 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | STEP 7 V16 or higher with HSP |
| ● STEP 7 configurable/integrated from version | STEP 7 V5.6 SP2 or higher |
| ● PCS 7 configurable/integrated from version | V9.1 |
| Operating mode | |
| ● MSO | Yes |
| Redundancy | |
| ● Redundancy capability | No |
| CiR - Configuration in RUN | |
| Reparameterization possible in RUN | Yes |
| Calibration possible in RUN | No |
| Input current | |
| Current consumption (rated value) | 65 mA |
| Current consumption, max. | 70 mA |
| Power loss | |
| Power loss, typ. | 1.2 W |
| Address area | |
| Address space per module | |
| ● Address space per module, max. | 4 byte; + 0/1 byte for QI information |
| ● Address space per module with HART, max. | 24 byte; + 0/1 byte for QI information |
| ● Address space per module with MultiHART, max. | 11 byte; + 0/1 byte for QI information |
| Hardware configuration | |
| Automatic encoding | |
| ● Mechanical coding element | Yes |
| Analog outputs | |
| Number of analog outputs | 2 |
| Cycle time (all channels), min. | 3 ms |
| Output ranges, current | |
| ● 0 to 20 mA | Yes; 15 bit |
| ● 4 mA to 20 mA | Yes; 16 bit incl. sign |
| Connection of actuators | |
| ● for current output two-wire connection | Yes |
| Load impedance (in rated range of output) | |
| ● with current outputs, max. | 500 Ω |
| ● with current outputs, inductive load, max. | Ex characteristic values must be observed |
| Cable length | |
| ● shielded, max. | 500 m; Ex characteristic values must be observed |
| ● unshielded, max. | 300 m; Ex characteristic values must be observed |
| Analog value generation for the outputs | |
| Settling time | |
| ● for resistive load | 1 ms; 500 ohms |
| Errors/accuracies | |
| Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-) | 0.02 % |
| Linearity error (relative to output range), (+/-) | 0.01 % |
| Temperature error (relative to output range), (+/-) | 0.005 %/K |
| Crosstalk between the outputs, min. | -70 dB |
| Repeat accuracy in steady state at 25 °C (relative to output range), (+/-) | 0.02 % |
| Operational error limit in overall temperature range | |
| ● Current, relative to output range, (+/-) | 0.5 %; 0 ... 60 °C: 0.3% |
| Basic error limit (operational limit at 25 °C) | |
| ● Current, relative to output range, (+/-) | 0.2 % |
| Protocols | |
| HART protocol | Yes |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Substitute values connectable | Yes |
| Alarms | |
| ● Diagnostic alarm | Yes |
| Diagnoses | |
| ● Monitoring the supply voltage | Yes; Module-wise |
| ● Wire-break | Yes; From output value > 240 µA |
| ● Short-circuit | Yes; < 20 ohms as of 1 mA output value |
| ● Group error | Yes |
| ● Overflow/underflow | Yes; channel by channel |
| Diagnostics indication LED | |
| ● MAINT LED | Yes; Yellow LED |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| ● Channel status display | |
Slicni proizvodi:
Siemens ET 200SP, AQ 2 X U/I High Speed; 6ES7135-6HB00-0DA1
SIMATIC ET 200SP, Analog output module, AQ 2x U/I High Speed, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.2%
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, AQ 2 X U/I High Feature; 6ES7135-6HB00-0CA1
SIMATIC ET 200SP, Analog output module, AQ 2x U/I High Feature suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.1%
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, DQ 4x24VDC/2A HF; 6ES7132-6BD20-0CA0
SIMATIC ET 200SP, digital output module, DQ 4x 24VDC/2A High Feature, suitable for BU type A0, Color code CC02, channel diagnostics
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, AQ 4xU/I ST; 6ES7135-6HD00-0BA1
SIMATIC ET 200SP, Analog output module, AQ 4XU/I Standard, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit, +/-0.3%
-
(Na stanju)
Cena na upit
Siemens ET 200SP, AQ 2xU Standard, PU 1; 6ES7135-6FB00-0BA1
SIMATIC ET 200SP, Analog output module, AQ 2xU Standard, Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, AQ 2xI Standard, PU 1; 6ES7135-6GB00-0BA1
SIMATIC ET 200SP, Analog output module, AQ 2xI Standard, Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit
-
(Trenutno nema na stanju)
Cena na upit