Helmholz NETLink® PRO PoE , 3 m Ethernet cable
In general, connection to each MPI/PROFIBUS terminal of the bus system or directly at the interfaces of active and passive participants is also possible. The PG...
Cena bez pdv-a: 71.244,39 |
Cena sa pdv-om: 85.493,27 |
In general, connection to each MPI/PROFIBUS terminal of the bus system or directly at the interfaces of active and passive participants is also possible. The PG socket integrated in the connector housing allows connection of additional devices.
The integrated web interface offers parameterization, diagnostic, and security features, and for functional enhancements, the user can use our free diagnostic software SHTools to, for example, automatically perform firmware updates. The latest version is available for download.
It draws its supply voltage through the CPU of the automation device, or optionally via externally supplied DC 24 V, or a CAT5 network cable using a PoE power supply unit.
The NETL ink® PRO PoE enables the implementation of TCP/IP on the MPI/PPI/PROFIBUS with up to 32 simultaneously open connection channels. With the switchable single-master operation, passive bus participants can be addressed. The integration of SCADA, HMI, and OPC applications is possible via the widely used ISO on TCP (RFC 1006) protocol.
The applications are automatically detected and forwarded by the NETL ink® PRO PoE.
- RFC 1006 (ISO on TCP)
- CPU-to-CPU communication (with S7-300* and S7-400*)
- Support for all common S7 engineering tools
- Dynamic address assignment using DHCP
- Security functions for securing TCP/IP access
- Switchable PLC write protection
- Up to 16 TCP connections
- Up to 32 MPI/PROFIBUS connections
- Easy configuration via web interface
- Variables can be monitored in a browser window
- Support for slave configuration
- Electrical isolation for MPI/PPI/PROFIBUS
- MPI/PPI/PROFIBUS from 9.6 kbps to 12 Mbps
- For S7-200*, S7-300*, S7-400*
- Powered Device (PD) as defined in IEEE 802.3af (POE) and 802.3at (POE+)
General information | ||
---|---|---|
Order number | 700-881-MPI21 | |
Article name | NETL ink® PRO PoE | |
Scope of delivery | NETL ink® PRO PoE , 3m Ethernet cable, Quick Start Guide, CD with software, and manual | |
Dimensions (DxWxH) | 102 x 54 x 30 mm | |
Weight | Approx. 180 g | |
Communication interface | ||
Number | 1 | |
Type |
10 Base-T 100 Base-TX |
|
Transmission rate | 10/100 Mbps autom. detection | |
Physical layer | Ethernet | |
Protocol | FDL, RFC 1006 | |
Connection | RJ45 | |
MPI/PPI/PROFIBUS interface | ||
Number | 1 | |
Type | RS485, isolated | |
Transmission rate | max. 12 Mbps autom. detection | |
Connection | SUB-D male connector, 9-pin. with PG interface and repeater | |
Status indicator | 3 LEDs, 2 of them bi-color | |
Voltage supply | 24 V DC, 18–30 V DC | |
Current draw | Max. 150 mA with DC 24 V | |
Ambient conditions | ||
Ambient temperature | 0 °C ... +60°C | |
Transport and storage temperature | -20 °C … +80 °C | |
Relative air humidity | 95 % r H without condensation | |
Pollution degree | 2 | |
Protection rating | IP20 | |
Certifications | CE | |
CE | ||
RoHS | Yes | |
REACH | Yes |
Slicni proizvodi:
Helmholz NETLink® USB Compact
(Trenutno nema na stanju)
Helmholz NETLink® PRO Compact, 3 m Ethernet cable
(Trenutno nema na stanju)
Helmholz PROFIBUS connector, 90°, EasyConnect®, without PG
(Trenutno nema na stanju)
Helmholz PROFIBUS connector, 90°, screw terminal connector, without PG, incl. installation instructions
(Trenutno nema na stanju)
Helmholz DP/CAN coupler CANopen Layer 2, incl. CD with software, manual
(Trenutno nema na stanju)
Helmholz FLEXtra® multiRepeater 6-way
(Trenutno nema na stanju)