EUCHNER Transponder-coded safety switch CTP-AR, 2 x M12, stainless steel ; 157816

EUCHNER Transponder-coded safety switch CTP-AR, 2 x M12, stainless steel ; 157816

Transponder-coded safety switch CTP-AR, 2 x M12, stainless steel Safety switch with guard locking and integrated evaluation electronics Version with stainless-steel...

Brand: EUCHNER
Šifra: 157816
Dostupnost: Proveriti dostupnost
Cena na upit

Transponder-coded safety switch CTP-AR, 2 x M12, stainless steel

  • Safety switch with guard locking and integrated evaluation electronics
  • Version with stainless-steel components
  • ECOLAB certificate
  • Up to 20 switches in series
  • Short circuit monitoring
  • Two safety outputs (semiconductor outputs)
  • Up to category 4/PL e according to EN ISO 13849-1
  • With two plug connectors M12
  • Multicode
  • Door monitoring output
  • Approach directions A, B and C (delivery state)

Approvals

Zulassung EACZertifikat ECOLABZulassung c_UL_us LISTED Class 2 or LV/C

Mechanical values and environment

Housing material  
Metal material Stainless steel
Safety switch housing Fiber glass reinforced thermoplastic
Weight  
Net 0,48 kg
Ambient temperature  
At UB = 24V DC -20 ... +55 °C
Degree of protection IP67 / IP69 / IP69K
Resilience to vibration In acc. with EN IEC 60947-5-3
Mechanical life 1 x 106
Installation orientation Any
Ready delay 8 s
Switching frequency max.0,5 Hz
Connection 2 plug connectors M12, 5 and 8-pin
Approach speed max.20 m/min
Guard locking principle Closed-circuit current principle
Locking force Fmax 3900 N
Locking force FZh 3000 N
Retention force 20 N
Extraction force 20 N
Actuating force 10 N
Overtravel 5 mm

Electrical connection ratings

Test-pulse interval min.140 ms
Test pulses max.1,0 ms
Operating voltage DC  
UUB 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Current consumption  
IUB 40 mA
IIMP 400 mA
Utilization category according to EN 60947-5-2  
DC-13 24V 150mA
Solenoid operating voltage DC  
UIMP 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Fusing  
External (operating voltage UB) 0,25 ... 2 A
External (solenoid operating voltage IMP) 0,5 ... 8 A
Rated insulation voltage Ui max.50 V
Rated impulse withstand voltage Uimp max.0,5 kV
Power consumption 6 W
EMC protection requirements In acc. with EN IEC 60947-5-3
Solenoid duty cycle 100 %
Degree of contamination (external, according to EN 60947-1) 3
Safety class  
EN IEC 61140 III
Risk time according to EN 60947-5-3  
Single device max.260 ms
Delay per device 5 ms
Switching load  
According to UL 24V DC, class 2
  Safety outputs FO1A / FO1B
Type of output 2 semiconductor outputs, p-switching, short circuit-proof
Switching current  
Per safety output FO1A / FO1B 1 ... 150 mA
Output voltage  
High U(FO1A) / U(FO1B) UB-1,5 ... UB V DC
Low U(FO1A) / U(FO1B) 0 ... 1 V DC
Off-state current Ir max.0,25 mA
Switch-on time max.400 ms
Discrepancy time  
Both safety outputs max.10 ms In acc. with EN IEC 60947-5-3
  Monitoring output OL
Type of output p-switching, short circuit-proof
Switching current 1 ... 50 mA
Output voltage 0,8xUB ... UB V DC
  Monitoring output OD
Type of output p-switching, short circuit-proof
Switching current 1 ... 50 mA
Output voltage 0,8xUB ... UB V DC
  Monitoring output OI
Type of output p-switching, short circuit-proof
Switching current 1 ... 50 mA
Output voltage 0,8xUB ... UB V DC

Work area

Repeat accuracy R  
According to EN 60947-5-2 10 %

Other

For the approval according to UL the following applies Operation only with UL class 2 power supply, or equivalent measures see operating instructions

Reliability values according to EN ISO 13849-1

Performance Level PL e
Category 4
PFHD 4.1 x 10 -9
Mission time 20 y
  • 402297

    402297



ELECTRO PNEUMATIC SOLUTIONS DOO

Electro Pneumatic Solutions d.o.o je osnovan u Srbiji 2014-te godine i posluje preko svojih kancelarija u Beogradu, Novom Sadu i Kraljevu. Sa ponosom ističemo da smo se za ovih 5 godina visoko pozicionirali u sektoru industrijske automatizacije.

Informacije

ELECTRO PNEUMATIC SOLUTIONS DOO

  • Daničareva 16/3, 11000 Beograd
  • Radno vreme: Ponedeljak - Petak 09 - 17h
  • Telefon:
  • +381 11 257 1922
  • +381 64 659 66 55
  • +381 62 290 996
  • email: office@ep-solutions.rs

Copyright ELECTRO PNEUMATIC SOLUTIONS DOO 2020©  
0.21
1
2
3
Uporedi proizvode Ukloni sve proizvode