EUCHNER Non-contact safety switch CET-AR-..., M12, with Bowden wire ; 110114

EUCHNER Non-contact safety switch CET-AR-..., M12, with Bowden wire ; 110114

Non-contact safety switch CET-AR-..., M12, with Bowden wire Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N Up...

Brand: EUCHNER
Šifra: 110114
Dostupnost: Proveriti dostupnost
Cena na upit
Non-contact safety switch CET-AR-..., M12, with Bowden wire

  • Safety switch with guard locking and integrated evaluation electronics
  • Locking force up to 6500 N
  • Up to 20 switches in series
  • Short circuit monitoring
  • 2 safety outputs (semiconductor outputs)
  • Up to category 4/PL e according to EN ISO 13849-1
  • With 2 plug connectors M12
  • Multicode
  • Door monitoring output
  • Indication of the door position by LED
  • Wire front release (bowden), 3m, automatic return
  • Approach direction A (default setting on delivery)

Approvals

Zulassung EACRichtlinie CEZulassung c_UL_us LISTED Class 2 or LV/C

Mechanical values and environment

Housing material  
Slide Stainless steel
Safety switch housing Die-cast aluminum
Weight  
Net 1 kg
Ambient temperature  
At UB = 24V DC -20 ... 55 °C
Degree of protection IP67
Resilience to vibration In acc. with EN IEC 60947-5-2
Mechanical life 1 x 106
Installation orientation Any
Degree of freedom  
Y ±5 mm
Z ±4 mm
X ±5 mm
Ready delay 10 s
Switching frequency max.0,5 Hz
Connection 2 plug connectors M12, 5 and 8-pin
Approach speed max.20 m/min
Guard locking principle Closed-circuit current principle
Locking force Fmax 6500 N
Locking force FZh 5000 N

Electrical connection ratings

Operating voltage DC  
UB 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
LED 24 V DC -15% ... 10%
Current consumption  
IB 80 mA
ICM 480 mA
Utilization category according to EN 60947-5-2  
DC-13 24V 200mA
Solenoid operating voltage DC  
UCM 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Fusing  
External (operating voltage UB) 0,25 ... 8 A
External (solenoid operating voltage UCM) 0,5 ... 8 A
Power consumption  
Solenoid max.12 W
EMC protection requirements In acc. with EN IEC 60947-5-3
Solenoid duty cycle 100 %
Degree of contamination (external, according to EN 60947-1) 3
Connecting cable 30V DC, 2A
Safety class  
EN IEC 61140 III
Switching load  
According to UL 24V DC, class 2
  Monitoring output OUT
Type of output p-switching, short circuit-proof
Switching current  
OUT 1 ... 50 mA
Output voltage  
OUT 0,8xUB ... UB V DC
Switching delay from state change max.400 ms
  Monitoring output OUT D
Type of output p-switching, short circuit-proof
Switching current  
OUT D 1 ... 50 mA
Output voltage  
OUT D 0,8xUB ... UB V DC
Switching delay from state change max.700 ms
  Safety outputs OA/OB
Type of output 2 semiconductor outputs, p-switching, short circuit-proof
Switching current  
Per safety output OA / OB 1 ... 200 mA
Output voltage  
High U(OA) / U(OB) UB-1,5V ... UB V DC
Low U(OA) / U(OB) 0 ... 1 V DC
Off-state current Ir max.0,25 mA
Risk time according to EN 60947-5-3  
Single device max.400 ms
Delay per device 5 ms
Switch-on time 400 ms
Discrepancy time  
Both safety outputs max.10 ms

Work area

Repeat accuracy R  
According to EN 60947-5-2 10 %

Other

C number  
C2290 With wire front release (bowden) mounted
For the approval according to UL the following applies Operation only with UL class 2 power supply, or equivalent measures see operating instructions

Reliability values according to EN ISO 13849-1

  Monitoring of guard locking and the safety guard position
Category  
Head upward 3
Head downward or horizontal 4
Performance Level PL e
PFHD  
Head upward 4.29 x 10-8
Head downward or horizontal 3.1 x 10-9
  Control of the guard locking
Category Depending on external control of guard locking
Performance Level Depending on external control of guard locking
PFHD Depending on external control of guard locking
Mission time 20 y
  • 398014

    398014

  • application example

    application example



Slicni proizvodi:


EUCHNER Read head CES-A-LNA-SC ; 077715

Read head CES-A-LNA-SC, M8 plug connector Cube-shaped design 42 x 25 mm With plug connector M8 Two safety screws M4x14 included
Cena na upit

EUCHNER Non-contact safety switch CET-AR-..., RC18, with escape release ; 110943

Non-contact safety switch CET-AR-..., RC18, with escape release Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N
Cena na upit

EUCHNER Read head CES-A-LNA-SC ; 077715

Read head CES-A-LNA-SC, M8 plug connector Cube-shaped design 42 x 25 mm With plug connector M8 Two safety screws M4x14 included
Cena na upit

EUCHNER Non-contact safety switch CET-AR-..., RC18, with escape release ; 110943

Non-contact safety switch CET-AR-..., RC18, with escape release Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N
Cena na upit

ELECTRO PNEUMATIC SOLUTIONS DOO

Electro Pneumatic Solutions d.o.o je osnovan u Srbiji 2014-te godine i posluje preko svojih kancelarija u Beogradu, Novom Sadu i Kraljevu. Sa ponosom ističemo da smo se za ovih 5 godina visoko pozicionirali u sektoru industrijske automatizacije.

Informacije

ELECTRO PNEUMATIC SOLUTIONS DOO

  • Daničareva 16/3, 11000 Beograd
  • Radno vreme: Ponedeljak - Petak 09 - 17h
  • Telefon:
  • +381 64 659 66 55
  • +381 62 290 996
  • email: office@ep-solutions.rs

Copyright ELECTRO PNEUMATIC SOLUTIONS DOO 2020©  
0.10
1
2
3
Uporedi proizvode Ukloni sve proizvode