Siemens ET 200SP, TM Timer DIDQ 10x24V; 6ES7138-6CG00-0BA0
SIMATIC ET 200SP, TM timer DIDQ 10x 24V time-controlled digital inputs and outputs 4 DI, 6DQ with time stamp Count, PWM, oversampling...
Cena na upit
| SIMATIC ET 200SP, TM timer DIDQ 10x 24V time-controlled digital inputs and outputs 4 DI, 6DQ with time stamp Count, PWM, oversampling |
| General information | |
| Product type designation | TM Timer DIDQ 10x24V |
| HW functional status | From FS03 |
| usable BaseUnits | BU type A0 |
| Product function | |
| ● I&M data | Yes; I&M 0 |
| ● Isochronous mode | Yes |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V13 Update 3 |
| ● STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| Supply voltage | |
| Load voltage L+ | |
| ● Rated value (DC) | 24 V |
| ● permissible range, lower limit (DC) | 19.2 V |
| ● permissible range, upper limit (DC) | 28.8 V |
| ● Reverse polarity protection | Yes; against destruction |
| Input current | |
| Current consumption, max. | 50 mA; without load |
| Encoder supply | |
| Number of outputs | 1 |
| 24 V encoder supply | |
| ● 24 V | Yes; L+ (-0.8 V) |
| ● Short-circuit protection | Yes |
| ● Output current, max. | 500 mA; Observe derating |
| Power loss | |
| Power loss, typ. | 1.5 W |
| Address area | |
| Address space per module | |
| ● Inputs | 26 byte |
| ● Outputs | 32 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | type B |
| Digital inputs | |
| Number of digital inputs | 4 |
| Digital inputs, parameterizable | Yes |
| Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Digital input functions, parameterizable | |
| ● Digital input with time stamp | Yes |
| — Number, max. | 4 |
| ● Counter | Yes |
| — Number, max. | 3 |
| ● Counter for incremental encoder | Yes |
| — Number, max. | 1 |
| ● Digital input with oversampling | Yes |
| — Number, max. | 4 |
| ● HW enable for digital input | Yes |
| — Number, max. | 1 |
| ● HW enable for digital output | Yes |
| — Number, max. | 3 |
| Input voltage | |
| ● Type of input voltage | DC |
| ● Rated value (DC) | 24 V |
| ● for signal "0" | -5 ... +5 V |
| ● for signal "1" | +11 to +30V |
| ● permissible voltage at input, min. | -30 V; -5 V continuous, -30 V brief reverse polarity protection |
| ● permissible voltage at input, max. | 30 V |
| Input current | |
| ● for signal "1", typ. | 2.5 mA |
| Input delay (for rated value of input voltage) | |
| ● Minimum pulse width for program reactions | 3 µs for parameterization "none" |
| for standard inputs | |
| — parameterizable | Yes; none / 0.05 / 0.1 / 0.4 / 0.8 ms |
| — at "0" to "1", min. | 4 µs |
| — at "1" to "0", min. | 4 µs |
| Cable length | |
| ● shielded, max. | 1 000 m; Depending on sensor, cable quality and rate of change |
| ● unshielded, max. | 600 m; Depending on sensor, cable quality and rate of change |
| Digital outputs | |
| Type of digital output | Transistor |
| Number of digital outputs | 6 |
| Current-sinking | Yes; With High Speed output |
| Current-sourcing | |
Slicni proizvodi:
Siemens ET 200SP, TM PTO 2x24V; 6ES7138-6EB00-0BA0
SIMATIC ET 200SP, TM PTO 2x24 V, interface module for stepper drives, 2 channels pulse train output, PTO: 24 V, 2 DI, 1 DQ 24 V DC per channel, suitable for BU type
-
(Trenutno nema na stanju)
Cena na upit
Siemens SIMATIC ET 200SP TM ECC 2xPWM ST; 6FE1242-6TM10-0BB1
SIMATIC ET 200SP TM ECC 2xPWM ST Chargecontroller f. conductive charging of electric vehicles according IEC61851 mode 3 for 2 Charging points -30°C...60°C
-
(Trenutno nema na stanju)
Cena na upit
Siemens SIMATIC ET 200SP TM ECC PL ST; 6FE1242-6TM20-0BB1
SIMATIC ET 200SP TM ECC PL ST Chargecontroller for conductiv Charging of electric vehicles according DIN SPEC 70121 Charging Mode 4 TEMP:-30°C...60°C 1x
-
(Trenutno nema na stanju)
Cena na upit
Siemens SIWAREX WP321 WEIGHING ELECTRONIC; 7MH4138-6AA00-0BA0
SIWAREX WP321 WEIGHING ELECTRONIC (1 CHANNEL) FOR STRAIN GAUGE LOAD CELLS / FULL BRIDGES (1-4 mV/V) FOR SIMATIC ET200SP, FITS to BU-TYPE A0, RS485- INTERFACE FOR
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP TM SIWAREX WP341 HF; 7MH4138-6CA00-0CU0
SIMATIC ET 200SP, TM SIWAREX WP341 HF, weighing module for conveyor belt scales and solids flowmeters, 3xDI, 3xDQ, 1xRS485, 1xEthernet, 1x LC (1-4mV/V)
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP TM SIWAREX WP351 HF; 7MH4138-6BA00-0CU0
SIMATIC ET 200SP, TM SIWAREX WP351 HF, verifiable weighing module for automatic dosing-, filling-, checking- and totalizing scales, 3xDI, 3xDQ, 1xCI,1xRS485, 1xEthernet,
-
(Trenutno nema na stanju)
Cena na upit