Helmholz Function module – 2 x Counter Economy 24 V, 1 KHz, 32 bit

Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that...

Brand: Helmholz
Šifra: 600-300-1AB01
Dostupnost: Proveriti dostupnost
Cena bez pdv-a: 7.371,33
Cena sa pdv-om: 8.845,59
 
 

Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that therefore need to be pre-processed. 

The counter module detects the edges of 24 V signals as pulses. The pulses are counted and the count is always available up to date for the PLC.
The count function can be enabled through PLC control commands. 
The count can be preallocated or reset through the PLC.

PLC control functions

  • Enable counter
  • Reset count
  • Load count
  • Change count direction
  • 2 counters
  • Count depth 32 bit (sign-allocated ± 231)
  • Up to 1 kHz counting frequency per counter
  • 24 V voltage supply for counter
  • 9 bytes of input data (count and status)
  • 10 bytes of output data (preset count and control functions)
General information
  Order number 600-300-1AB01
  Article name 2x Counter Economy 24 V, 1 KHz, 32 bit
  Scope of delivery 2x Counter Economy 24 V, 1 KHz, 32 bit
  Dimensions (DxWxH) 110 x 14 x 73 mm
  Weight Approx. 70 g
Input voltage 24 V DC
Electrical isolation
  from the backplane bus Yes
  Between the channels No
Current draw
  External Max. 0 mA
  Internal Max. 22 mA
Power dissipation Max. 0.5 W
Input characteristic curve Type 2, EN 61131-2
Number of counters 2
Counter bit depth 32 bit, sign allocated +/- 231
Counting frequency per channel Max. 1 kHz, 1x evaluation, rising edges
Counter functions Forwards/backwards, Load count, Reset count
Hot-swap capable Yes
Ambient conditions
  Ambient temperature 0 °C … +60 °C
  Transport and storage temperature -20 °C … +80 °C
  Relative air humidity 95 % r H without condensation
  Protection rating IP 20
  Certifications CE, UL
UL
  Surrounding Air Temperature 0 °C … +60°C
  Pollution degree 2
CE
  Noise immunity DIN EN 61000-6-2 “EMC Immunity”
  Interference emission DIN EN 61000-6-4 “EMC Emission”
  Vibration and shock resistance DIN EN 60068-2-8:2008 “Vibration”, DIN EN 60068-27:2010 “Shock“
  RoHS Yes
  REACH Yes

Slicni proizvodi:


Helmholz Function module – 4 x Counter Economy 24 V, 1 KHz, 32 bit

Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that
-
Need to order

(Trenutno nema na stanju)

 
 
11.509,61

Helmholz Function module – 1 x SSI Encoder interface

In terms of hardware, the module's SSI is implemented as a point-to-point connection as defined in the RS-422 standard. Moreover, in order to avoid ground loops,
-
Need to order

(Trenutno nema na stanju)

 
 
20.562,12

Helmholz Function module – Energy Meter, 1 A

The energy meter function module can be used to measure all important current and voltage measurement values on 230 V AC networks. Input voltages (3 phases + N)
-
Need to order

(Trenutno nema na stanju)

 
 
23.148,55

Helmholz Function module – 1 x Counter 24 V, 500 KHz, 32 bit

Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that
-
Need to order

(Trenutno nema na stanju)

 
 
23.148,55

Helmholz Function module – 1 x Counter , 5 V (RS422), 4 MHz, 32 bit

Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that
-
Need to order

(Trenutno nema na stanju)

 
 
23.148,55

Helmholz Function module – strain gauge weighing module

The weighing module serves the purpose of measuring and processing signals from weight, torque, or force sensors. The weighing module enables the direct connection
-
Need to order

(Trenutno nema na stanju)

 
 
24.441,76

1
2
3
Uporedi proizvode Ukloni sve proizvode