Helmholz AEA 300, 8 inputs, for connection of current, voltage transmitters, resistors
The analog input module is suitable for connection of current transmitters in the range up to ± 20 mA, voltage transmitters in the range up to ±10...
Cena bez pdv-a: 43.969,31 |
Cena sa pdv-om: 52.763,17 |
The analog input module is suitable for connection of current transmitters in the range up to ± 20 mA, voltage transmitters in the range up to ±10 V, Pt100/Ni100 sensors, and resistors.
All inputs can be programmed either as voltage or current inputs for Pt100/Ni100 sensors and resistors, freely selectable in their combination.
The signal lines are connected to the corresponding front connectors and can be marked in the label field.
The modules can be fully parameterized with the hardware configurator of the programming software. A hardware configuration is not necessary (no measuring range module).
All inputs can be programmed either as voltage or current inputs for Pt100/Ni100 sensors and resistors, freely selectable in their combination.
The signal lines are connected to the corresponding front connectors and can be marked in the label field.
The modules can be fully parameterized with the hardware configurator of the programming software. A hardware configuration is not necessary (no measuring range module).
| General information | ||
|---|---|---|
| Order number | 700-331-1KF01 | |
| Article name | AEA 300, 8 inputs, for connection of current, voltage transmitters, resistors | |
| Scope of delivery | AEA 300, 8 inputs, for connection of current, voltage transmitters, resistors | |
| Dimensions (DxWxH) | 116 x 40 x 125 mm | |
| Weight | Approx. 220g | |
| Measuring ranges | ||
| Voltage | ±50 mV, ±500 mV, ±1 V, ±5 V, ±10V, 1 ... 5V, 0 ... 10 V | |
| Current | ±20 mA, 0 ... 20 mA, 4 ... 20 mA | |
| Resistance | 0 ... 6 kΩ, 0 ... 600 Ω | |
| Resistance thermometer (standard and climate) | Pt100, Ni100, Ni1000, LG-Ni1000 | |
| Basic error limit at 25 °C | ||
| Voltage input | ±0.4 % | |
| Current input | ±0.4 % | |
| Resistance | ±0.4 % | |
| Resistance thermometer | ± 0.8 K Pt100 standard, ±1 K | |
| Operational error limit in the entire temperature range | ||
| Voltage input | ±0.6 % | |
| Current input | ±0.6 % | |
| Resistance | ±0.6 % | |
| Resistance thermometer | ±1 K; Pt100, Ni100, standard ±1.2 K | |
| Voltage supply | ||
| Voltage supply | 5 V DC via backplane bus | |
| Current draw | Typ. 160 mA at 5 V (from backplane bus) | |
| Power dissipation (nominal operation) | ca. 0.8 W | |
| Front connectors | 40-pin | |
| Ambient conditions | ||
| Ambient temperature | 0 °C … +60 °C | |
| Transport and storage temperature | -25 °C … +75 °C | |
| Pollution degree | 2 | |
| Protection rating | IP20 | |
| Certifications | CE | |
| CE | ||
| RoHS | Yes | |
| REACH | Yes | |
Slicni proizvodi:
Helmholz AEA 300, 4 inputs, Pt100/Ni100 for connecting resistance thermometers
The analog input module is suitable for connection of (Pt100/Ni100) sensors and resistors. The signal lines are connected to the corresponding front connectors and
-
(Trenutno nema na stanju)
46.167,78
Helmholz AEA 300, 8 voltage inputs, for connecting voltage transmitters, 0–10 V
The analog input module is suitable for connection of voltage transmitters in the range up to ±10 V. The signal lines are connected to the corresponding front
-
(Trenutno nema na stanju)
50.306,06
Helmholz Mounting rail for 1500 series, 70 mm
For all modules in the 1500 series, we offer the mechanical module rack with a length of 70 mm.
-
(Trenutno nema na stanju)
1.655,32
Helmholz Mounting rail for 1500 series, 160 mm
For all modules in the 1500 series, we offer the mechanical module rack with a length of 160 mm
-
(Trenutno nema na stanju)
1.913,96
Helmholz AEA 300, 4 inputs, Pt100/Ni100 for connecting resistance thermometers
The analog input module is suitable for connection of (Pt100/Ni100) sensors and resistors. The signal lines are connected to the corresponding front connectors and
-
(Trenutno nema na stanju)
46.167,78
Helmholz AEA 300, 8 voltage inputs, for connecting voltage transmitters, 0–10 V
The analog input module is suitable for connection of voltage transmitters in the range up to ±10 V. The signal lines are connected to the corresponding front
-
(Trenutno nema na stanju)
50.306,06