Helmholz AEA 300, 8 voltage inputs, for connecting voltage transmitters, 0–10 V
The analog input module is suitable for connection of voltage transmitters in the range up to ±10 V. The signal lines are connected to the corresponding front...
Cena bez pdv-a: 50.306,06 |
Cena sa pdv-om: 60.367,28 |
The analog input module is suitable for connection of voltage transmitters in the range up to ±10 V.
The signal lines are connected to the corresponding front connectors and can be marked in the label field.
The modules can be fully parameterized with the hardware configurator of the programming software. A hardware configuration is not necessary (no measuring range module).
The signal lines are connected to the corresponding front connectors and can be marked in the label field.
The modules can be fully parameterized with the hardware configurator of the programming software. A hardware configuration is not necessary (no measuring range module).
| General information | ||
|---|---|---|
| Order number | 700-331-0V010 | |
| Article name | AEA 300, 8 voltage inputs, for connecting voltage transmitters, 0-10 V | |
| Scope of delivery | AEA 300, 8 voltage inputs, for connecting voltage transmitters, 0-10 V | |
| Dimensions (DxWxH) | 116 x 40 x 125 mm | |
| Weight | Approx. 220g | |
| Number of inputs | 8 | |
| Alarms | ||
| Limit alarm | Parameterizable | |
| Diagnostic alarm | Configurable for channels 0 and 2 | |
| Diagnoses | Red LED for group error indicator | |
| Load voltage L+/L- | 24 V DC | |
| Reverse polarity protection | Yes | |
| Voltage/input resistance |
±80 mV/10 M Ω ±250 mV/10 M Ω ±500 mV/10 M Ω ±1 V/10 M Ω ±2.5 V/100 k Ω ±5 V/100 k Ω 1 ... 5 V/100 k Ω ±10 V/100 k Ω |
|
| Input voltage | 20 V | |
| from the backplane bus | Yes | |
| Conversion time / resolution (per channel) | ||
| Integration time | 2.5/16.6/20/100 ms | |
| Noise suppression for interference frequency | 400/60/50/10 Hz | |
| Resolution (VZ = sign) (depending on the integration time) | 9 + VZ / 12 + VZ / 12 + VZ / 14 + VZ Bit | |
| Voltage input | ±0.5 % | |
| Voltage input | ±0.6 % | |
| Shielded | 200 m (50 m for ±80 mV) | |
| Current draw | ||
| External | Max. 200 mA | |
| Internal (backplane bus) | typ. 120 mA | |
| Power dissipation | typ. 1.8 W | |
| Front connectors | 20-pin | |
| Ambient conditions | ||
| Ambient temperature | 0 °C … +60 °C | |
| Transport and storage temperature | -25 °C … +75 °C | |
| Pollution degree | 2 | |
| Protection rating | IP20 | |
| Certifications | CE, UL | |
| CE | ||
| RoHS | Yes | |
| REACH | Yes | |
Slicni proizvodi:
Helmholz AEA 300, 8 inputs, for connection of current, voltage transmitters, resistors
The analog input module is suitable for connection of current transmitters in the range up to ± 20 mA, voltage transmitters in the range up to ±10
-
(Trenutno nema na stanju)
43.969,31
Helmholz AEA 300, 4 inputs, Pt100/Ni100 for connecting resistance thermometers
The analog input module is suitable for connection of (Pt100/Ni100) sensors and resistors. The signal lines are connected to the corresponding front connectors and
-
(Trenutno nema na stanju)
46.167,78
Helmholz Mounting rail for 1500 series, 70 mm
For all modules in the 1500 series, we offer the mechanical module rack with a length of 70 mm.
-
(Trenutno nema na stanju)
1.655,32
Helmholz Mounting rail for 1500 series, 160 mm
For all modules in the 1500 series, we offer the mechanical module rack with a length of 160 mm
-
(Trenutno nema na stanju)
1.913,96
Helmholz AEA 300, 0–10 V/4–20 mA, 4-channel, 4 outputs for connecting analog actuators
The 4-channel analog output module is suitable for connection of analog actuators for voltage and current outputs in the range up to ±10 V or ±20 mA.
-
(Trenutno nema na stanju)
51.728,60
Helmholz ''RAM Card, long, 1 Mbyte
The RAM Card with a capacity von 1 MByte is designed for use in CPU modules from CPU 412 to CPU 417. We have been able to achieve top quality standards and a very
-
(Trenutno nema na stanju)
57.160,10