Ulazne/Izlazne jedinice
Ulazne/Izlazne jedinice
Kao što se može videti u pregledu stranice , Electro Pneumatic Solutions može da ponudi širok izbor ulaznih i izlaznih modula za proširenje. U ovoj sferi se već dugo oslanjamo na nemačku kompaniju Helmholz sa kojom imamo uspešnu saradnju.
Helmholz Analog input module – AI 4 x U, ±10 V, 0–10 V, 1–5 V, 12 Bit
Parameters for the module Diagnostic alarm: On | Off Overflow/underflow diagnosis: On | Off Representation values: SIMATIC* S7 | SIMATIC* S5 Parameters for each
19.905,18
Helmholz System module – Potential distributor 9 x free potential
The “9x free” potential distributor makes 9 contacts that are connected to each other available on the front connector. The potential distributed through
2.572,16
Helmholz Digital output module – DO 2 x DC 24 V, 500 mA
24 V DC output voltage 500 mA output current per channel A blue LED indicates the module's operating status Green LEDs (one for each output) indicate the output
3.166,73
Helmholz Analog input module – AI 8 x TC, Iso., 16 Bit
Parameters for the module Diagnostic alarm: On | Off Overflow/underflow diagnosis: On | Off Representation values: SIMATIC* S7 | SIMATIC* S5 (for ±80 mV only)
42.524,70
Helmholz System module – Potential distributor 9 x DC 24 V
The 9 x 24 V DC potential distributor makes the 24 V DC supply from the power bus available on the front connector. Max. 8 A supply load Powers outputs using the
2.572,16
Helmholz System module – Potential distributor 9 x GND
The 9x GND potential distributor makes the GND connection from the power bus available on the front connector. Max. 8 A supply load Powers outputs using the power
2.572,16
Helmholz Digital input module – DI 3 x DC 24 V, 3-wire
24 V DC input voltage Can accommodate 3-wire sensors Fuse for 24 V DC A blue LED indicates the module's operating status Green LEDs (one for each input) indicate
3.102,11
Helmholz System module – Power and isolation module DC 24 V, 8 A
The 24 V DC, 8 A power and isolation module serves as a power supply module for the power bus’ 24 V DC, GND, and AUX to the right, while segmenting the power
2.572,16
Helmholz Placeholder module, 20-pin
The 20-pin placeholder module is suitable for reserving slots for non-parameterized signal modules. It maintains structure and address assignments for when signal
9.306,32
Helmholz DEA 300, DC 24 V, 0.5 A, 16 outputs
Digital Output Module, DEA 300 , 16 outputs, 24VDC
21.973,25
Helmholz Placeholder module, 40-pin
The 40-pin dummy module is suitable for reserving slots for non-parameterized signal modules. It maintains structure and address assignments for when signal modules
10.340,35
Helmholz DEA 300, DC 24 V, 0.5 A, 8 inputs (DC 24 V) | 8 outputs (DC 24 V, 0.5 A)
Digital Input/Output Module DEA 300, DC 24 V, 0.5 A, 8 inputs (DC 24 V) | 8 outputs (DC 24 V, 0.5 A)
23.912,06
Helmholz DEA 300, relay, quenching circuit, 8 outputs
Digital Output Module, DEA 300, relay, quenching circuit, 8 outputs
21.068,47
Helmholz DEA 300, Digital Output Module, 8 outputs (24 VDC; 2 A)
Digiral Output Module, DEA 300, 8 outputs, 24VDC, 2A
18.741,89
Helmholz Front connector without cables, screw contacts, 20-pin
The 20-pin front connector is designed with proven screw contacts. It enables simple connection of sensors and actuators to input/output modules. In this way the
2.391,21
Helmholz Front connector without cables, spring type terminal, 20-pin
The 20-pin front connector is an installation-friendly spring-type terminal. It enables simple connection of sensors and actuators to input/output modules. In this
2.391,21
Helmholz Front connector without cables, spring type terminal, 40-pin
The 40-pin front connector is an installation-friendly spring-type terminal. It enables simple connection of sensors and actuators to input/output modules. In this
3.851,78
Helmholz Front connector without cables, screw contacts, 40-pin
The 40-pin front connector is designed with proven screw contacts. It enables simple connection of sensors and actuators to input/output modules. In this way the
3.851,78
Helmholz FastPlug, 40-pin
The professional 40-pin FastPlug front adapters are used for screwing and snapping onto 32-bit S7 input/output modules. The effort required for wiring is very low.
5.170,18
Helmholz Front connector with cables, screw contacts, 20-pin, 2 m
The 20-pin front connectors with cables and proven screw contacts enable simple connection of sensors and actuators to input/output modules. In this way the wiring
6.398,09
Helmholz Front connector with cables, spring type terminal, 20-pin, 3 m
The 20-pin front connector with cables and easy to assemble spring type terminal enable simple connection of sensors and actuators to input/output modules. In this
6.527,35
Helmholz FastPlug, 20-pin
The professional 20-pin FastPlug front adapters are used for screwing and snapping onto 16-bit S7 input/output modules. The effort required for wiring is very low.
3.748,38
Ulazne/Izlazne jedinice
Kao što se može videti u pregledu gore, Electro Pneumatic Solutions može da ponudi širok izbor ulaznih i izlaznih modula za proširenje. U ovoj sferi se već dugo oslanjamo na nemačku kompaniju Helmholz sa kojom imamo uspešnu saradnju.
U kategoriji ulazno/izlaznih modula, Helmholz zaista može da se pohvali visokim kvalitetom i referencama na Balkanu i u Evropi, neretko i na drugim kontinentima.
Mi ističemo neke od proizvoda u nepreglednoj paleti ulaznih i izlaznih modula i odgovarajućih konektora :
-Digitalni ulazni moduli sa različitim brojem ulaza(16 i 32) i različitim naponom napajanja
-Digitalni izlazni moduli sa različitim brojem izlaza
-Kombinovani ulazno/izlazni moduli
-Moduli sa relejnim izlazima
-Analogni ulazni moduli predviđeni za temperaturne senzore, transmitere i sl. Sa 8 ili 4 ulaza
-Analogni izlazni moduli
Od konektora predstavljamo posebne Helmholz Fast plug-in, kao i klasične konektore , sa ili bez priključnog kabla, različite namene i sa različitim brojevima „pin-ova“.
Detaljne tehničke informacije, dokumentaciju, šeme za ožičavanje i sl.možete pronaći u pregledu proizvoda.
1
2
3
Uporedi proizvode
Ukloni sve proizvode