Siemens ET 200SP, CM 4 X IO-Link ST; 6ES7137-6BD00-0BA0
SIMATIC ET 200SP, CM 4xIO-Link ST Communication module IO-Link Master V1.1...
Cena na upit
| SIMATIC ET 200SP, CM 4xIO-Link ST Communication module IO-Link Master V1.1 |
| General information | |
| Product type designation | CM 4 x IO-Link ST |
| HW functional status | FS20 |
| Firmware version | V2.2.2 |
| ● FW update possible | Yes |
| usable BaseUnits | BU type A0 |
| Color code for module-specific color identification plate | CC04 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No; Only for PROFINET and configuration as version with FW V2.0 or V2.1 |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | STEP 7 V15 or higher |
| ● STEP 7 configurable/integrated from version | STEP 7 V5.5 or higher |
| ● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| ● PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V; 20.5 V if IO-Link is used, as the supply voltage for IO-Link devices has to be at least 20 V at the master. |
| permissible range, upper limit (DC) | 28.8 V |
| power supply according to NEC Class 2 required | No |
| Input current | |
| Current consumption, max. | 45 mA; without load |
| Encoder supply | |
| Number of outputs | 4 |
| Output current | |
| ● Rated value | 700 mA; Per channel |
| 24 V encoder supply | |
| ● Short-circuit protection | Yes |
| ● Output current, max. | 2.1 A |
| Power loss | |
| Power loss, typ. | 1 W |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Electronic coding element type H | Yes |
| Digital outputs | |
| Cable length | |
| ● unshielded, max. | 20 m; Also applies for shielded cables |
| IO-Link | |
| Number of ports | 4 |
| ● of which simultaneously controllable | 4 |
| IO-Link protocol 1.0 | Yes |
| IO-Link protocol 1.1 | Yes |
| Transmission rate | 4.8 kBaud (COM1); 38.4 kBaud (COM2), 230.4 kBaud (COM3) |
| Cycle time, min. | 2 ms; dynamic, depending on user data length |
| Size of process data, input per port | 32 byte; max. |
| Size of process data, input per module | 144 byte; max. |
| Size of process data, output per port | 32 byte; max. |
| Size of process data, output per module | 128 byte; max. |
| Memory size for device parameter | 2 kbyte; for each port |
| Master backup | Yes |
| Configuration without S7-PCT | Yes |
| Cable length unshielded, max. | 20 m |
| Operating modes | |
| ● IO-Link | Yes |
| ● DI | Yes |
| ● DQ | Yes; max. 100 mA per channel |
| Time Based IO | |
| — TIO IO-Link IN | No; Only for PROFINET and configuration as version with FW V2.0 or V2.1 |
| — TIO IO-Link OUT | No; Only for PROFINET and configuration as version with FW V2.0 or V2.1 |
| — TIO IO-Link IN/OUT | No; Only for PROFINET and configuration as version with FW V2.0 or V2.1 |
| Connection of IO-Link devices | |
| ● Port type A | Yes |
| ● Port type B | Yes; 24 V DC via external terminal |
| ● via three-wire connection | Yes |
| Interrupts/diagnostics/status information | |
| Alarms | |
| ● Diagnostic alarm | Yes; The port diagnosis is available in the IO-Link mode only. |
| Diagnoses | |
| ● Monitoring the supply voltage | Yes |
| ● Wire-break | Yes |
| ● Short-circuit | Yes |
| ● Group error | Yes |
| Diagnostics indication LED | |
| ● Monitoring of the supply voltage (PWR-LED) | |
Slicni proizvodi:
Siemens ET 200SP, cm DP for ET 200SP CPU; 6ES7545-5DA00-0AB0
SIMATIC DP, CM PROFIBUS DP for ET 200SP CPU module with PROFIBUS DP interface (9-pole D-sub socket) DP master for 125 DP slaves DP slave,
-
(Trenutno nema na stanju)
Cena na upit
Siemens Communication processor CP 1542SP-1; 6GK7542-6UX00-0XE0
Communications processor CP 1542SP-1 for connection of an SIMATIC S7-ET 200SP to Industrial Ethernet; open IE communication (TCP/IP, ISO-on-TCP, UDP), PG/OP, S7
-
(Trenutno nema na stanju)
Cena na upit
Siemens Communication processor CP 1543SP-1; 6GK7543-6WX00-0XE0
Communications processor CP 1543SP-1 for connection of an SIMATIC S7-ET 200SP to Industrial Ethernet; Security (firewall and VPN) Open IE communication (TCP/IP,
-
(Trenutno nema na stanju)
Cena na upit
Siemens Communication processor CP 1542SP-1 IRC; 6GK7542-6VX00-0XE0
Communications Processor CP 1542SP-1 IRC for connection of an SIMATIC S7-ET 200SP to Industrial Ethernet, SINAUT ST7, TeleControl Server Basic, IEC 60870-5-104 or
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, CM PTP, PU 1; 6ES7137-6AA01-0BA0
SIMATIC ET 200SP, CM PTP communication module for serial connection RS-422, RS-485 and RS-232, freeport, 3964 (R), USS, MODBUS RTU master, slave, max. 250 Kbit/s,
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, CM 1x DALI; 6ES7137-6CA00-0BU0
SIMATIC ET 200SP, CM 1x DALI, DALI master module, integrated DALI bus power supply 160 mA, up to 64 DALI control gears, 63 control devices, color code CC20, suitable
-
(Trenutno nema na stanju)
Cena na upit