Festo Stepper motor EMMS-ST-42-S-SEB-G2 ; 1370473
For simple positioning applications with reduced requirements: the long-life stepper motor series with two-phase hybrid technology. Small increment and high driving...
Trenutno nema na stanju
For simple positioning applications with reduced requirements: the long-life stepper motor series with two-phase hybrid technology.
- Small increment and high driving torques thanks to 2-phase hybrid technology
- Optimized connection technology
- 28 stock types
- With incremental encoder for closed loop operation
- Available with holding brake
- Step angle with full step
- 1.8 deg
- Step angle tolerance
- ±5%
- Type code
- EMMS-ST
- Rotor position sensor
- Incremental encoder
- Rotor position sensor interface
- RS422 TTL A/B channels + zero index
- Rotor position sensor measuring principle
- Optical
- Max. rotational speed
- 1740 1/min
- Brake DC operating voltage
- 24 V
- Insulation protection class
- B
- Brake power consumption
- 8 W
- Nominal operating voltage DC
- 48 V
- Motor nominal current
- 1.8 A
- Phase winding resistance
- 1.75 Ohm
- Winding inductance phase
- 3.3 mH
- Voltage constant, phase
- 23 mVmin
- Rating class according to EN 60034-1
- S1
- CE marking (see declaration of conformity)
- As per EU EMC directive
- Corrosion resistance class (CRC)
- 1 - Low corrosion stress
- Storage temperature
- -20 °C ... 70 °C
- Relative air humidity
- 0 - 85 %
- Degree of protection
- IP54
- Ambient temperature
- -10 °C ... 50 °C
- Thermal class according to EN 60034-1
- B
- Certification
-
RCM compliance mark
c UL us - Recognized (OL) - Total output inertia moment
- 0.095 kgcm²
- Brake holding torque
- 0.4 Nm
- Motor holding torque
- 0.5 Nm
- Brake mass moment of inertia
- 0.013 kgcm²
- Rotor mass moment of inertia
- 0.082 kgcm²
- Permissible axial shaft load
- 7 N
- Permissible radial shaft load
- 20 N
- Product weight
- 600 g
- Electrical connection technology
- Plug
- Note on materials
- RoHS-compliant
- Conforms to standard
- IEC 60034
-
1370473datasheet
-
EMMS-ST ENUS