Festo Position transmitter SDAT-MHS-M50-1L-SA-E-0.3-M8 ; 1531265
The universal transmitter solution. With three options for signal evaluation: classic, analog, programmable switching output, or programmable IO-Link® output....
Trenutno nema na stanju
The universal transmitter solution. With three options for signal evaluation: classic, analog, programmable switching output, or programmable IO-Link® output. The sensing ranges of the transmitter are perfectly coordinated to the standard strokes of Festo cylinders.
- Measuring principle: magnetic Hall
- Can be inserted into the slot from above, secured with screw
- Suitable for use with energy chain and robot lines
- LED status indications
- Cable length 0.3 m
- Programmable IO-Link®/switching output
- Type code
- SDAT
- Electrical connection 1, type of mounting
- Screw-type lock
- Electrical connection 1, connection type
- Cable with plug
- KC characters
- KC EMC
- Electrical connection 1, connection technology
- M8x1 A-coded as per EN 61076-2-104
- Electrical connection for input 1, connection pattern
- 00991171
- Electrical connection 1, number of pins/wires
- 4
- Design
- for T-slot
- Symbol
- 00995389
- Certification
-
c UL us - Listed (OL)
RCM compliance mark - CE marking (see declaration of conformity)
- As per EU EMC directive
- Note on materials
-
RoHS-compliant
Halogen-free - Measured variable
- Position
- Measuring principle
- Magnetic Hall
- Sensing range
- 0 µm ... 50000 µm
- Ambient temperature
- -25 °C ... 70 °C
- Typical sampling interval
- 1 ms
- Max. travel speed
- 3 m/s
- Displacement resolution
- 0.05 mm
- Repetition accuracy
- 0.1 mm
- Switching output
- PNP
- Switching element function
- N/C contact/N/O contact switchable
- On time
- < 2 ms
- Switch-off time
- < 2 ms
- Max. switching frequency
- 1000 Hz
- Max. output current
- 100 mA
- Max. switching capacity DC
- 2.7 W
- Voltage drop
- 2.5 V
- Analog output
- 4 - 20 mA
- Sensitivity
- 0.32 mA/mm
- Typical linearity error in ± mm
- ±0.25 mm
- Max. load resistance of current output
- 500 Ohm
- Short-circuit protection
- yes
- Overload protection
- Available
- Protocol
-
IO-Link®
I-Port - IO-Link®, protocol version
- Device V 1.1
- IO-Link®, profile
- Smart sensor profile
- IO-Link®, function classes
-
Diagnostics
Identification
Teach channel
Binary data channel (BDC)
Process data variable (PDV) - IO-Link®, communication mode
- COM3 (230.4 kBd)
- IO-Link®, SIO mode support
- Yes
- IO-Link®, port class
- A
- IO-Link®, process data width IN
- 2 Byte
- IO-Link®, process data content IN
-
4 bit BDC (position monitoring)
12 bit PDV (position measurement) - IO-Link®, minimum cycle time
- 1 ms
- DC operating voltage range
- 15 V ... 30 V
- Residual ripple
- 10 %
- Reverse polarity protection
- for all electrical connections
- Connection outlet orientation
- Longitudinal
- Material of pin contacts
-
Gold-plated
Copper alloy - Connector cable test conditions
-
Flexural strength: as per Festo standard
Torsional resistance: > 300 000 cycles, ±270°/0.1 m
Cable chain: 5 million cycles, bending radius 28 mm - Cable length
- 0.3 m
- Cable characteristic
- Suitability for energy chains/robot applications
- Color cable sheath
- Gray
- Material of cable sheath
- TPE-U(PUR)
- Type of mounting
-
Screwed tightly
Can be inserted in slot from above - Mounting position
- Any
- Product weight
- 19 g
- Housing material
-
Polyester
PA-reinforced
High-alloy stainless steel
Brass, nickel-plated - Material of union nut
- Brass, nickel-plated
- Film material
- Polyester
- Ready status indication
- LED green
- Switching status indication
- LED yellow
- Status indicator
- LED red
- Setting options
-
IO-Link®
Pushbutton - Ambient temperature with flexible cable installation
- -20 °C ... 70 °C
- Degree of protection
-
IP65
IP68
-
SDAT-MHS ENUS