Festo Air flow sensor SFAH-10U-Q6S-PNLK-PNVBA-M8 ; 8058470
The highly flexible SFAH monitors the flow rate of compressed air and non-corrosive gases. Many industry sectors will appreciate the flexibility it offers in terms...
Trenutno nema na stanju
The highly flexible SFAH monitors the flow rate of compressed air and non-corrosive gases. Many industry sectors will appreciate the flexibility it offers in terms of its compact design (20 x 58 mm), numerous installation options, and space-saving adjustable QS elbow connections.
SFAH-10U-Q6S-PNLK-PNVBA-M8 Part no. 8058470
- Process, compressed air, forming gas and pneumatic object monitoring, parts handling of ultra-small parts, leak test
- Compact design 20x58 mm
- Clear 2-line display
- Mounting: H-rail mounting, wall or surface mounting, front panel mounting
- Serial communication integrated using IO-Link® 1.1
- Type code
- SFAH
- Protection against tampering
-
IO-Link®
PIN code - Pneumatic connection, outlet direction
- Straight
- Electrical connection for input 1, connection pattern
- 00991171
- Electrical connection 1, connection type
- Plug
- Electrical connection 1, connection technology
- M8x1 A-coded as per EN 61076-2-104
- KC characters
- KC EMC
- Electrical connection 1, number of pins/wires
- 4
- Idle current
- ≤ 25 mA
- Symbol
- 00995794
- Certification
- RCM compliance mark
- CE marking (see declaration of conformity)
-
As per EU EMC directive
As per EU RoHS directive - Note on materials
- RoHS-compliant
- Measured variable
-
Mass flow rate
Volumetric flow rate - Flow direction
- Unidirectional
- Measuring principle
- Thermal
- Method of measurement
- Heat transfer
- Flow measuring range start value
- 0.2 l/min
- Flow measuring range end value
- 10 l/min
- Operating pressure
- -0.9 bar ... 10 bar
- Operating medium
-
Argon
Compressed air as per ISO 8573-1:2010 [6:4:4]
Nitrogen - Temperature of medium
- 0 °C ... 50 °C
- Ambient temperature
- 0 °C ... 50 °C
- Nominal temperature
- 23 °C
- Accuracy of flow rate
- ± (2% o.m.v. + 1% FS)
- Zero point repetition accuracy in ± %FS
- 0.2 %FS
- Repetition accuracy margin in ± %FS
- 0.8 %FS
- Temperature co-efficient margin in ± %FS/K
- typ. 0.15% FS/K
- Pressure influence of margin in ±%FS/bar
- 1 %FS/b.
- Switching output
- 2 x PNP or 2 x NPN switchable
- Switching function
-
Window comparator
Threshold value comparator
Auto difference monitoring - Switching element function
- N/C contact/N/O contact switchable
- Max. output current
- 100 mA
- Analog output
-
0 - 10 V
4 - 20 mA
1 - 5 V - Flow rate curve start value
- 0 l/min
- Flow rate curve end value
- 10 l/min
- Max. load resistance of current output
- 500 Ohm
- Min. load resistance of voltage output
- 20 kOhm
- Short-circuit protection
- yes
- Overload protection
- Available
- Protocol
- IO-Link®
- IO-Link®, protocol version
- Device V 1.1
- IO-Link®, profile
- Smart sensor profile
- IO-Link®, function classes
-
Identification
Binary data channel (BDC)
Diagnostics
Teach channel
Process data variable (PDV) - IO-Link®, communication mode
- COM2 (38,4 kBd)
- IO-Link®, SIO mode support
- Yes
- IO-Link®, port class
- A
- IO-Link®, process data width IN
- 3 Byte
- IO-Link®, process data content IN
-
14 bit PDV (flow measurement)
1 bit BDC (volume monitoring)
2 bit BDC (flow monitoring) - IO-Link®, service data contents IN
- 32 bit volume/mass measurement
- IO-Link®, minimum cycle time
- 4 ms
- IO-Link®, data memory required
- < 500 byte
- DC operating voltage range
- 22 V ... 26 V
- Reverse polarity protection
- for all electrical connections
- Type of mounting
- With accessories
- Mounting position
- Any
- Pneumatic connection
- For pneumatic tubing outside diameter 6 mm
- Product weight
- 60 g
- Housing material
- PA-reinforced
- Materials in contact with the media
-
High-alloy stainless steel
Silicon
PA-reinforced
Epoxy
Silicon nitride
NBR
Wrought aluminum alloy, anodized - Display type
- Illuminated LCD, multi-color
- Displayable unit(s)
-
l
l/h
l/min
g/min
scft
scft/min
g
scft/h - Setting options
-
Via display and pushbuttons
IO-Link®
Teach-in - Degree of protection
- IP40
- Pressure drop
- < 5 mbar
- Protection class
- III
- Corrosion resistance class (CRC)
- 2 - Moderate corrosion stress