Siemens ET 200SP,RQ NO-mA 4x120VDC..230VAC/5A ST; 6ES7132-6MD00-0BB1
SIMATIC ET 200SP, relay module normally open, RQ NO-MA4x120VDC..230VAC/5A ST, with manual operation, packing unit VPE 1, suitable for BU type B0 or B1, Module d...
Price on request
| SIMATIC ET 200SP, relay module normally open, RQ NO-MA4x120VDC..230VAC/5A ST, with manual operation, packing unit VPE 1, suitable for BU type B0 or B1, Module diagnostics |
| General information | |
| Product type designation | RQ 4x120 V DC ... 230 V AC/5 A NO MA ST |
| HW functional status | From FS03 |
| Firmware version | |
| ● FW update possible | Yes |
| usable BaseUnits | BU type B0, B1 |
| Color code for module-specific color identification plate | CC40 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V13 SP1 |
| ● STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| ● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| ● PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Operating mode | |
| ● DQ | Yes |
| ● DQ with energy-saving function | No |
| ● PWM | No |
| ● Oversampling | No |
| ● MSO | No |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Input current | |
| Current consumption, max. | 100 mA; without load |
| Power loss | |
| Power loss, typ. | 1.5 W |
| Address area | |
| Address space per module | |
| ● Inputs | 1 byte; + 1 byte for QI information |
| ● Outputs | 1 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | type C |
| Selection of BaseUnit for connection variants | |
| ● 2-wire connection | BU type B1 |
| ● 3-wire connection | BU type B0 |
| Digital outputs | |
| Type of digital output | Relays |
| Number of digital outputs | 4 |
| Short-circuit protection | No |
| Switching frequency | |
| ● with resistive load, max. | 2 Hz |
| ● with inductive load, max. | 0.5 Hz |
| ● on lamp load, max. | 2 Hz |
| Total current of the outputs | |
| ● Current per channel, max. | 5 A |
| ● Current per module, max. | 20 A |
| Total current of the outputs (per module) | |
| horizontal installation | |
| — up to 50 °C, max. | 20 A |
| — up to 60 °C, max. | 16 A |
| vertical installation | |
| — up to 40 °C, max. | 20 A |
| — up to 50 °C, max. | 16 A |
| Relay outputs | |
| ● Number of relay outputs | 4 |
| ● Rated supply voltage of relay coil L+ (DC) | 24 V |
| ● Current consumption of relays (coil current of all relays), max. | 40 mA |
| ● external protection for relay outputs | Yes, with miniature fuse max. 6 A tripping current and quick-response tripping characteristic |
| ● Number of operating cycles, max. | 7 000 000; see additional description in the manual |
| Switching capacity of contacts | |
| — with inductive load, max. | 2 A; see additional description in the manual |
| — with resistive load, max. | 5 A; see additional description in the manual |
| — Thermal continuous current, max. | 5 A |
| — Switching current, min. | 100 mA; 5 V DC |
| — Rated switching voltage (DC) | 24 V DC to 120 V DC |
| — Rated switching voltage (AC) | 24V AC to 230V AC |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | |
Similar products:
Siemens ET 200SP, F-DQ 8x 24VDC/0.5A PP; 6ES7136-6DC00-0CA0
SIMATIC DP, Electronics module ET 200SP, F-DQ 8XDC 24V0.5A PP, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)
-
(Out of stock)
Price on request
Siemens ET 200SP, DQ 4x24..230VAC/2A ST; 6ES7132-6FD00-0BB1
SIMATIC ET 200SP, digital output module, DQ 4x 24..230V AC/2A Standard suitable for BU type B1, Color code CC41, Module diagnostics
-
(Out of stock)
Price on request
Siemens ET 200SP, DQ 16X24VDC/0,5A BA, PU 1; 6ES7132-6BH00-0AA0
SIMATIC ET 200SP, digital output module, DQ 16x 24VDC/0.5A Basic, Pack quantity: 1 unit, suitable for BU type A0, Color code CC00, Module diagnostics
-
(Out of stock)
Price on request
Siemens ET 200SP, DQ 8x24VDC/0,5A HF, PU 1; 6ES7132-6BF00-0CA0
SIMATIC ET 200SP, digital output module, DQ 8x 24VDC/0.5A High Feature, source output PNP, source output, Packing unit: 1 unit, suitable for BU type A0, color code
-
(Out of stock)
Price on request
Siemens ET 200SP, RQ NO 4x 120VDC..230VAC/5A,PU1; 6ES7132-6HD01-0BB1
SIMATIC ET 200SP, Relay module, RQ NO 4x 120V DC..230VAC/5A ST. 4 normally open contacts, isolated contacts, packing unit: 1 piece, fits to BU-type B0 and B1, Colour
-
(Out of stock)
Price on request
Siemens ET 200SP, El-Mod., F-DQ 4xDC 24V/2A; 6ES7136-6DB00-0CA0
SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)
-
(Out of stock)
Price on request