Name: Siemens ET 200SP, F-DQ 8x 24VDC/0.5A PP; 6ES7136-6DC00-0CA0
Brand: Siemens
SKU: 6ES7136-6DC00-0CA0
Availability: OutOfStock

0 Compare products

0 View cart

+381 11 257 19 22

Siemens ET 200SP, F-DQ 8x 24VDC/0.5A PP; 6ES7136-6DC00-0CA0

SIMATIC DP, Electronics module ET 200SP, F-DQ 8XDC 24V0.5A PP, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)...

Brand: Siemens
Product Code: 6ES7136-6DC00-0CA0
Availability: Check availability

Price on request

Description
Specification

SIMATIC DP, Electronics module ET 200SP, F-DQ 8XDC 24V0.5A PP, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)

General information
Product type designation		F-DQ 8x24 V DC/0.5 A PP HF
Firmware version
● FW update possible		Yes
usable BaseUnits		BU type A0
Color code for module-specific color identification plate		CC02
Product function
● I&M data		Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated from version		V14 SP1 with HSP 202
● STEP 7 configurable/integrated from version		V5.5 SP4 HF5
● PROFINET from GSD version/GSD revision		V2.31
Supply voltage
Rated value (DC)		24 V
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
power supply according to NEC Class 2 required		No
Input current
Current consumption (rated value)		75 mA; without load
Current consumption, max.		21 mA; From the backplane bus
output voltage / header
Rated value (DC)		24 V
Power
Power available from the backplane bus		70 mW
Power loss
Power loss, typ.		3 W
Address area
Address space per module
● Inputs		6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA
● Outputs		6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA
Hardware configuration
Automatic encoding		Yes
● Electronic coding element type F		Yes
Digital outputs
Type of digital output		Transistor
Number of digital outputs		8
Digital outputs, parameterizable		Yes
Short-circuit protection		Yes
● Response threshold, typ.		Min. 0.7 A
Open-circuit detection		No
Limitation of inductive shutdown voltage to		Typ. -39 V
Controlling a digital input		Yes
Switching capacity of the outputs
● with resistive load, max.		0.5 A
● on lamp load, max.		2 W
Load resistance range
● lower limit		48 Ω
● upper limit		12 000 Ω
Output voltage
● for signal "1", min.		24 V; L+ (-0.5 V)
Output current
● for signal "1" rated value		0.5 A
● for signal "0" residual current, max.		0.5 mA
Switching frequency
● with resistive load, max.		30 Hz; Symmetrical
● with inductive load, max.		0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical
● with capacitive load, max.		2 Hz; Symmetrical
● on lamp load, max.		10 Hz; Symmetrical
Total current of the outputs
● Current per channel, max.		0.5 A; note derating data in the manual
● Current per module, max.		3 A; note derating data in the manual
Total current of the outputs (per module)
horizontal installation
— up to 40 °C, max.		3 A
— up to 50 °C, max.		2.5 A
— up to 60 °C, max.		2 A
vertical installation
— up to 50 °C, max.		2 A
Cable length
● shielded, max.		100 m
● unshielded, max.		100 m
Interrupts/diagnostics/status information
Diagnostics function		Yes
Substitute values connectable