Name: Siemens ET 200SP, El-Mod., F-DQ 4xDC 24V/2A; 6ES7136-6DB00-0CA0
Brand: Siemens
SKU: 6ES7136-6DB00-0CA0
Availability: OutOfStock

0 Compare products

0 View cart

011 257 1922

Siemens ET 200SP, El-Mod., F-DQ 4xDC 24V/2A; 6ES7136-6DB00-0CA0

SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)...

Brand: Siemens
Product Code: 6ES7136-6DB00-0CA0
Availability: Check availability

Price on request

Description
Specification

SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)

General information
Product type designation	F-DQ 4x24 V DC/2A HF
usable BaseUnits	BU type A0
Product function
● I&M data	Yes; I&M0 to I&M3
Engineering with
● STEP 7 TIA Portal configurable/integrated from version	V12
● STEP 7 configurable/integrated from version	V5.5 SP3 / -
● PROFINET from GSD version/GSD revision	V2.31
Supply voltage
Rated value (DC)	24 V
permissible range, lower limit (DC)	20.4 V
permissible range, upper limit (DC)	28.8 V
Reverse polarity protection	Yes
power supply according to NEC Class 2 required	No
Input current
Current consumption (rated value)	75 mA; without load
Current consumption, max.	21 mA; From the backplane bus
output voltage / header
Rated value (DC)	24 V
Power
Power available from the backplane bus	70 mW
Power loss
Power loss, typ.	4 W
Address area
Address space per module
● Inputs	5 byte
● Outputs	5 byte
Hardware configuration
Automatic encoding	Yes
● Electronic coding element type F	Yes
Digital outputs
Type of digital output	Transistor
Number of digital outputs	4
Digital outputs, parameterizable	Yes
Short-circuit protection	Yes
● Response threshold, typ.	> 3.3 A
Open-circuit detection	Yes
● Response threshold, typ.	8 mA
Overload protection	Yes
● Response threshold, typ.	2.9 A
Limitation of inductive shutdown voltage to	Typ. -2x 47 V
Switching capacity of the outputs
● with resistive load, max.	2 A
● on lamp load, max.	10 W
Load resistance range
● lower limit	12 Ω
● upper limit	2 000 Ω
Output voltage
● for signal "1", min.	24 V; L+ (-0.5 V)
Output current
● for signal "1" rated value	2 A
● for signal "0" residual current, max.	0.5 mA
Switching frequency
● with resistive load, max.	30 Hz; Symmetrical
● with inductive load, max.	0.1 Hz; according to IEC 60947-5-1, DC-13, symmetrical
● on lamp load, max.	10 Hz; Symmetrical
Total current of the outputs
● Current per channel, max.	2 A; note derating data in the manual
● Current per module, max.	6 A; note derating data in the manual
Cable length
● shielded, max.	1 000 m
● unshielded, max.	500 m
Interrupts/diagnostics/status information
Diagnostics function	Yes
Substitute values connectable	No
Alarms
● Diagnostic alarm	Yes
Diagnostics indication LED
● RUN LED	Yes; green LED
● ERROR LED	Yes; red LED
● Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
● Channel status display	Yes; green LED
● for channel diagnostics	Yes; red LED