NOVUS Panel Meters/Indicators 96x48mm

N1500 - Universal Input Panel Meter

Details
- Display: 7-segment LED, 6-digit with 17 mm height
- Input Type: Thermocouples J, K, T, N, R, S, B, E, Pt100, 0-20 mA, 4-20 mA, 0 -50 mV, 0-5 Vdc, 0-10 Vdc, 4-20 mA no linear, 0-20 mA custom linear, 4-20 mA custom linear, 0-20 mA custom no linear, 4-20 mA custom no linear.
- Accuracy: Thermocouples J, K, T: 0.25% of span ± 1 ° C; Thermocouples N, R, S, B: 0.25% of span ± 3 ° C; Pt100, 0-20 mA, 4-20 mA, 0- 5 Vdc, 0-10 Vdc: 0.2% of the span
- Sampling Rate: 5 samples per second for Pt100 and Thermocouples; 15 samples per second for 0-50 mV, 4-20 mA, 0-5 V and 0-10 V
- Display Resolution: Temperature: 1 / 0.1; Other measures: 1 / 0.1 / 0.01 / 0.001 / 0.0001
- Custom Linearization: 30 points for non-standard sensors
- Digital Input: Operates as a key for Hold, Peak Hold and maximum/minimum reset.
- Analog Output: 0-20 mA or 4-20 mA (optional) - electrically isolated
- Alarms: Up to 4 alarms
- Alarm Types: Minimum, maximum, minimum differential, maximum differential, differential out of range, differential within range, and open sensor.
- Timer Function: Alarms with delay, pulse, or oscillator timing.
- Auxiliary Power Supply: 24 Vdc
- Optional: 2 relays, analog output (4-20 mA or 0-20 mA), RS485
- Communication: RS485 Modbus RTU optional
- Math Function: Square Root
- Safety: Password protected configuration
- Configuration Interface: Via RS485
- Power Supply: 100-240 Vac / dc or 12-24 Vdc 
- Maximum Consumption: 7.5 VA
- Dimensions: 96 x 48 x 92 mm (1/8 DIN)
- Front Panel: IP65; Polycarbonate (PC) UL94 V-2
- Enclosure: IP20; ABS + PC UL94 V-0
- Operating Conditions: 5 to 50 ° C, and 0 to 80% RH up to 30 °C
 

N1500-LC - Load Cell Panel Meter

Details
- Input: 4-20 mA, 0-20 mA, 0-50 mV, 0-20 mV and -20 to 20 mV
  Increasing or decreasing indication
  10 Vdc (or 5 Vdc) dedicated power supply for load cells
  Record of maximum and minimum values
  Hold, peak hold, tare, zero tare and auto zero functions
  Digital input
- Optionally you can display:
  Retransmission of the PV to 0-20 mA or 4-20 mA
  RS485 serial communication with MODBUS RTU Protocol
  Third and fourth alarm relays
- Dimensions: 48 x 96 x 92 mm (1/16 DIN)
- Approximate Weight: 250 g
- Panel cut: 45 x 93 mm (+0.5 -0.0 mm)
- Universal switching power supply: 100 to 240 Vac / dc ± 10%, 50/60 Hz
- Optional Input: 24 Vac / dc ± 10%
- Maximum power consumption: 7.5 VA
- Environmental conditions:
  Operating Temperature: 5 to 50 ° C
  Relative Humidity: 80% to 30 ° C
  For temperatures higher than 30 ° C, decrease by 3% by ° C
  Intern use; Installation category II, Degree of pollution 2, Altitude <2000 m
- Input: Voltage and Current (configurable according to table 1)
- Internal Resolution: 128,000 levels
- Display resolution: 62,000 levels
- Sample rate: 15 samples per second
- Accuracy: 0.2% of span
- Input impedance: 0-50 mV> 10 MΩ, 0-20 mA, 4-20 mA: 15 Ω (+2 Vdc @ 20 mA)
- Auxiliary Voltage Source: 5 or 10 Vdc, ± 1%, 35 mA
- Electromagnetic compatibility: EN 61326-1: 1997 and EN61326-1 / A1: 1998
- Security: EN61010-1: 1993 and EN61010-1 / A2: 1995
- Ready for 6.3 mm connection terminals
- Front Panel: IP65; Polycarbonate (PC) UL94 V-2
- Enclosure: IP20; ABS + PC UL94 V-0
 

N1500-FT - Flow Rate & Totalization Panel Meter

Tailor made for flow applications, the Flow Rate & Totalization Panel Meter N1500-FT measures and displays both the instant measured value and the totalized value. One model is capable of reading a 4-20 mA signal or a pulsed signal. Input type is fully software selected. Several display modes are avaliable and instrument can be ordered with up to 4 relays plus digital communication. It boasts dual retransmission outputs: one 4-20 output, typically for instant flow, and the other is a pulse (NPN) output, typically for totalized flow. Both outputs are isolated.

Ideal for water and other liquid distribution systems, the N1500-FT is a flow indicator specifically designed for control and precision. It provides flexibility in measuring and displaying both instantaneous and totalized flow rate, and also offers up to four outputs that accept custom configurations such as alarm and dosage control. 

A flow indicator output can be used to switch on the start of dosing and off when the desired volume is reached. It is compatible with flow sensors with pulse, dry contact, magnetic pick-up, or 4-20mA outputs. As a differential, the 4-20mA input can also be used to indicate a second variable of choice, allowing, for example, the simultaneous indication of flow rate and pressure.

Details