SIMATIC ET 200MP - The modular IO system for SIMATIC S7-1500
Search by features
SIMATIC ET 200MP - The modular IO system for SIMATIC S7-1500
SIMATIC ET 200MP is a modular and scalable distributed I/O system with high channel density and low parts variance.
Siemens SIMATIC S7-1500, Front connector in push-in design, 40-pole, for 35 mm wide modules; 6ES7592-1BM00-0XB0
SIMATIC S7-1500, Front connector in push-in design, 40-pole, for 35 mm wide modules incl. 4 potential bridges and cable ties
-
(Out of stock)
4.608,55
Siemens S7-1500, AI 8xU/I HF; 6ES7531-7NF00-0AB0
SIMATIC S7-1500 analog input module AI 8xU/I HF, up to 24 bit resolution, accuracy 0.1%, 8 channels in groups of 1; common mode voltage: 30 V AC/60 V DC, Diagnostics;
-
(Out of stock)
Price on request
Siemens S7-1500, DQ 64x24VDC/0.3A BA; 6ES7522-1BP00-0AA0
SIMATIC S7-1500, digital output module, DQ 64xDC 24V/0,3A BA, 64 channels in groups of 16, 2 A per group at 60 °C, sinking output, 35 mm wide, the module supports
-
(Out of stock)
Price on request
Siemens Universal Front Door S7-1500 IO (35mm); 6ES7528-0AA00-7AA0
SIMATIC S7-1500, spare part Front door for 35 mm width I/O modules; Consisting of: * Front door (unlasered), * Labeling strips (front) * Wiring diagram, 5 units
-
(Out of stock)
Price on request
Siemens S7-1500, DQ 16x24V DC/0.5A HF; 6ES7522-1BH01-0AB0
SIMATIC S7-1500, digital output module DQ16x24 V DC/0.5A HF; 16 channels in groups of 8; 4 A per group; single-channel diagnostics; substitute value: switching cycle
-
(Out of stock)
Price on request
Siemens S7-1500, PS 25W 24V DC; 6ES7505-0KA00-0AB0
SIMATIC S7-1500, System power supply PS 25W 24 V DC, supplies the backplane bus of the S7-1500 with operating voltage
-
(Out of stock)
Price on request
Siemens S7-1500, DI 16X24VDC HS; 6ES7521-7BH00-0AB0
SIMATIC S7-1500, digital input module DI 16x24 V DC AUX; 16 channels in groups of 8; for 24 V encoder; sensor supply 24 V DC; input type 2 (IEC 61131); input delay
-
(Out of stock)
Price on request
Siemens ET 200MP, IM 155-5 PN ST; 6ES7155-5AA01-0AB0
SIMATIC ET 200MP. PROFINET IO-DEVICE INTERFACEMODULE IM 155-5 PN ST FOR ET 200MP ELEKTRONIKMODULES; UP TO 12 IO-MODULES WITHOUT ADDITIONAL PS; UP TO 30 IO- MODULES
-
(Out of stock)
Price on request
Siemens S7-1500, CM PTP RS232 HF; 6ES7541-1AD00-0AB0
SIMATIC S7-1500, CM PTP RS232 HF Communication module for Serial connection RS232, Freeport, 3964 (R), USS, MODBUS RTU Master, Slave, 115200 Kbit/s, 9-pin D-sub
-
(Out of stock)
Price on request
Siemens S7-1500, AI 16xI BA; 6ES7531-7MH00-0AB0
SIMATIC S7-1500, analog input module AI 16xI BA, 16-bit resolution accuracy 0.5%, 16 channels in groups of 16, common mode voltage 4 V DC, diagnostics, hardware
-
(Out of stock)
Price on request
Siemens S7-1500, PS 60W 24/48/60V DC; 6ES7505-0RA00-0AB0
SIMATIC S7-1500, System power supply PS 60W 24/48/60 V DC, supplies the backplane bus of the S7-1500 with operating voltage
-
(Out of stock)
Price on request
Siemens S7-1500, DI 16x230VAC BA; 6ES7521-1FH00-0AA0
SIMATIC S7-1500, digital input module DI 16x230 V AC BA, 16 channels in groups of 4; Input delay 20 ms; Input type 1 (IEC 61131): Front connector (screw terminals
-
(Out of stock)
Price on request
Siemens ET 200MP, IM 155-5 PN BA; 6ES7155-5AA00-0AA0
SIMATIC ET 200MP PROFINET IO device Interface module IM 155-5 PN BA for ET 200MP electronic modules; up to 12 IO modules; Integrated 2-port switch; RJ45 Shared Device
-
(Out of stock)
Price on request
Siemens S7-1500, AI 4xU/I/RTD/TC ST; 6ES7531-7QD00-0AB0
SIMATIC S7-1500 Analog input module AI 4xU/I/RTD/TC ST, 16 bit resolution, Accuracy 0.3%, 4 channels in groups of 4; 2 channels for RTD measurement; Common mode
-
(Out of stock)
Price on request
Siemens S7-1500, DQ 64x24VDC/0.3A SNK BA; 6ES7522-1BP50-0AA0
SIMATIC S7-1500, digital output module, DQ 64xDC 24V/0.3A SNK BA, 64 channels in groups of 16, 2 A per group at 60 °C, sourcing output, 35 mm wide cables and
-
(Out of stock)
Price on request
SIMATIC ET 200MP - The modular IO system for SIMATIC S7-1500
SIMATIC ET 200MP
The modular IO system for SIMATIC S7-1500
SIMATIC ET 200MP is a modular and scalable distributed I/O system with high channel density and low parts variance.
SIMATIC ET 200 MP is approved for degree of protection IP20 and designed for installation in a control cabinet. It is used both as central I/O for the Advanced Controller
S7-1500 as well as in distributed systems.
Highlights
Easy cabling and tool-free setup make for quick and simple station setup
• Tool-free cabling with push-in terminal.
• Shielding terminal for analog signals.
• Tool-free setup of the station.
• Low parts variance of the modules.
Technology modules offer hardware-level signal pre-processing for:
• Applications with artificial intelligence.
• Fast counting.
• Measurement and position detection for different encoders.
• Energy management.
• Weighing and dosing tasks.
Fail-safe modules can be plugged or retrofitted to reduce engineering work or hardware
• One control system, one engineering, one communication for standard and fail-safe automation.
• SIL 3 with Safety DI / DQ modules.
• SIL 2 with Standard AQ / DQ via safe group shutdown.
Integrated diagnostics ensures quick error localization
• Uniform display at the module.
• 1:1 assignment LED to channel.
• Quick troubleshooting using the display of the S7-1500.
Robust against external interferences
• Consistent shielding concept with direct shielding of the analog signals at the module.
• Separation of signal cables and 24 V DC supply cables.
High flexibility through covering various functions
• Digital and analog inputs/outputs.
• CPUs with full S7-1500 functionality.
• Motor starters for drives