Klemsan Power Factor Controller 232R-E, 3phase, 24 steps ; 606007

RAPIDUS is a 3 phase Reactive Power Control Relay that capable of inductive and capacitive compensation. At the same time, with the energy measurements menu, it...

Brand: Klemsan
Product Code: 606007
Availability: Check availability
VAT-exclusive price: 65.993,94
VAT-inclusive price: 79.192,72
RAPIDUS is a 3 phase Reactive Power Control Relay that capable of inductive and capacitive compensation. At the same time, with the energy measurements menu, it can perform detailed energy analysis. Dynamic capacitor monitoring allows continuous updating of step power values. Thanks to unique intelligent mode, it activates the step combination closest to the measured demand by calculating their lifetime.
 
A power factor controller RAPIDUS is an automation device which allows power distribution system to operate at its maximum efficiency with reducing reactive power. This control process reduces the load requirement on the energy generation and transmission supply system.
  • Modular design
  • No socket cable required
  • Dynamic capacitator monitoring
  • The latest technology
  • Learning connections and step powers
  • Modbus communication
More about product in technical specification and documentation.

CONNECTION DATA

Connection Type
3F4T

GENERAL

Measurement System
LCD Screen
+
Language Support
Turkish, English, Russian
Password Protection
Voltage Transformer Ratio (VTR)
1 - 5000
Current Transformer Ratio (CTR)
1 - 5.000
Number of Measurements in One Period
512
LCD/Screen Refresh Rate
1 sn.
Networks
TT, TN, IT
Battery
Real Time Clock
Four Quadrant Measurement
4
Demand Period
1-60 min. adjustable
Phase Diagram
Available
Min./Max./Demand Values

COMPENSATION MODES

Linear
Circular
Sequential
Rapidus (Smart Control Mode)
Manual

STEP CONFIGURATIONS

Manual Definition
Predefined
1-1-1-1, 1-1-2-2, 1-2-2-4, 1-2-3-3, 1-2-4-4, 1-1-2-4, 1-2-3-4, 1-2-4-8, 1-1-2-3
Power (kVAr)
0.00-1000 adjustable
Type
3Ø capacitor, 3Ø shunt reactor adjustable
Fixed Step Assignment

POWER FACTOR SETTINGS

Learnable Step and Connections
Target 1 cosØ
0.8 cap. to 0.8 ind. adjustable
Target 2 cosØ
0.8 cap. to 0.8 ind. adjustable
Dual cosØ Target
4 Quadrant Operation for Generators

ENERGY MEASUREMENT

3Ø Phase Energy Measurement
Available

CURRENT MEASUREMENT INPUT

Measuring Range
10mA-6A AC
Overvoltage Category
300 V Cat III
Voltage Fluctuation Measurement
2 kV
Power Consumption
<0.2 VA
Intermittent Overload
100A for 1 sec.
Sampling Frequency Between 45-65 Hz
25.6 kHz

VOLTAGE MEASUREMENT INPUT

Overvoltage Category
300 V Cat III
Measuring Range L-N
95-272 VAC ±10%
Measuring Range L-L
164-471 VAC ±10%
Frequency Measuring Range
45-65 Hz
Power Consumption
<0.1 VA
Sampling Frequency Between 45-65 Hz
25.6 kHz

POWER QUALITY MEASUREMENTS

THD - Voltage (as %)
THD - Current (as %)
Harmonics for Current and Voltage Phases
Up to 51st

MEASURING ACCURACY - IEC 61557-12

Total Active Power
Class 0.2
Total Reactive Power
Class 1
Total Reactive Energy
Class 2
Frequency
Class 0.05
Current
Class 0.2
Neutral Current
Class 0.5
Voltage
Class 0.2
Power Factor
Class 0.5
THDV, THDI
Class 1
Total Apparent Power
Class 0.2
Total Active Energy
Class 0.5

MEASURING ACCURACY - IEC 62053-22

Total Active Energy
Class 0.2S

MEASURING ACCURACY - IEC 62053-23

Total Reactive Energy
Class 2

COMPENSATION RELAY OUTPUTS

Number of Outputs
24
Type
NO (SPST)
Max. Switching Current
2A
Max. Switching Voltage
250VAC
Max. Switching Power
1250VA
Mechanical Operating Life
10.0000000 operations
Electrical Operating Life (NO side)
5×104(5A@250VAC) 1×105(5A@30VDC)

ALARM RELAY OUTPUTS

Number of Outputs
2
Type
NO (SPST)
Max. Switching Current
4A
Max. Switching Voltage
250 VAC
Max. Switching Power
1250 VA
Mechanical Operating Life
= 10.0000000 operations
Electrical Operating Life (NO side)
5×104(5A@250VAC) 1×105(5A@30VDC)

GENERATOR / DAY-NIGHT INPUT

Number of Inputs
1
Frequency
45-65Hz
Input
95-240VAC

INPUTS AND OUTPUTS

Digital Outputs
--
Analog Outputs
--

POWER SUPPLY

Backup Supply Input
--
Voltage
L1-N den ±10% 95-272VAC
Frequency
45-65Hz
Consumption
< 10VA

MECHANICAL PROPERTIES

Weight (g)
765
Protection Class
Front IP40 / Rear IP20
Mounting Type
Panel Mount
Packaging Quantity
1

CABLE CROSS-SECTIONS

Voltage, Current, All Relay Outputs, Generator Input
2.5mm² - 14AWG with ferrule - 4mm² - 12AWG without ferrule, 2x1.5mm² - 2x16AWG
RS485
1.5mm² - 16AWG with ferrule - 1.5mm² - 16AWG without ferrule, 2x0.75mm² - 2x18AWG

ENVIRONMENTAL CONDITIONS

Operating Temperature
-20°C +55°C
Storage Temperature
-30°C +80°C
Relative Humidity (Non-condensing)
Max. 95%

EMC-EMI

EN 61000-6-1:2011
EN 61000-6-3 - A1 - AC:2013

DIAGRAMS

 

COMMUNICATION

Protocol
Modbus RTU
Baud Rate
2400-115200 bps adjustable
Parity
---
Stop Bit
1
Slave ID
1-247
Isolation
2000V RMS

CONTROL PROCESS AND FUNCTIONS

Phase Switching Angle
±45 degree adjustable
Average Time
Off, 5 sec, 10 sec, 20 sec, 30 sec, 40 sec, 50 sec, 60 sec adjustable
Step Deactivation Time
1-600 sec. adjustable
Step Discharge Time
3-1000 sec. adjustable
Step Activation Time
1-600 sec. adjustable

TIME RECORDED DATA STORAGE

Alarm Records
50
Hourly Records
1920 Hours x 68 Different Paramaters
Daily Records
240 Days x 68 Different Paramaters
Monthly Records
36 Months x 68 Different Paramaters
Demand
4 Months x 16 Different Parameters

  • 231R-E, 211R, 232R-E

    231R-E, 211R, 232R-E

  • RAPIDUS 232R-E

    RAPIDUS 232R-E

  • RAPIDUS3PHASE 606005 606007 EN 17102022

    RAPIDUS3PHASE 606005 606007 EN 17102022



Similar products:


Klemsan Power Factor Controller 231R-E, 3phase, 12 steps ; 606005

RAPIDUS is a 3 phase Reactive Power Control Relay that capable of inductive and capacitive compensation. At the same time, with the energy measurements menu, it
-
Need to order

(Out of stock)

 
 
49.494,87

Klemsan Mini Power Factor Controller RAPIDUS 13, 1 phase, 3 steps; 606077

Klemsan Mini Power Factor Controller RAPIDUS 13; 606077
-
Need to order

(Out of stock)

 
 
11.549,59

Klemsan Power Factor Controller 116R, 1phase, 6 steps ; 606063

RAPIDUS 1 series is a monophase Reactive Power Control Relay. It has 4, 6, 8, 10 and 12-steps options and an optional RS485 port. The built-in temperature sensor
-
Need to order

(Out of stock)

 
 
28.046,31

ELECTRO PNEUMATIC SOLUTIONS DOO

  • Jugoslovenska 2/13A, Čukarica, Beograd
  • Opening Times: Monday - Friday 8am-5pm
  • Telephone:
  • 011 257 1922
  • +381 64 659 66 55
  • +381 62 800 70 43
  • email: office@ep-solutions.rs

linkedin youtube instagram twitter facebook
1
2
3
Compare products Remove all products