INVERTEK DRIVES Dual relay output card, for E3; ODP-2ROUT-IN
ODP-2ROUT-IN is a Second Relay Output Module for Optidrive E3. It can be used in applications where the analog/digital output from the drive is converted to a relay...
VAT-exclusive price: 3.703,30 |
VAT-inclusive price: 4.443,96 |
ODP-2ROUT-IN is a Second Relay Output Module for Optidrive E3. It can be used in applications where the analog/digital output from the drive is converted to a relay output. Typical applications are where two relay outputs are required. The functions of the relays are programmable in the drive and can be any of the following:
- Drive enabled
- Drive healthy
- Drive at set speed
- Drive at zero speed
- Drive at max speed
- Motor in overload
Compat with E3
Weight 0.2000
Model No ODP-2ROUT-IN
STANDARDS CONFORMITY An Optidrive fitted with this Option complies with the following standards:
• CE-marked for Low Voltage Directive.
• IEC 664-1 Insulation Coordination within Low Voltage Systems.
• UL 840 Insulation Coordination for electrical equipment.
• EN50081-2 EMC Generic Emissions Standard, Industrial Level.
• EN50082-2 EMC Generic Immunity Standard, Industrial Level.
• Enclosure ingress protection, EN60529 IP00, NEMA 250.
• Flammability rating according to UL 9
-
82-2ROUT-IN 2ROUT Iss2.01
Similar products:
INVERTEK DRIVES 2 relay Output Option Module, for P2, E3, Eco; OPT-3-2ROUT-IN
2 relay Output Option Module, for P2, E3, Eco; OPT-3-2ROUT-IN
-
(In stock)
1.293,22
INVERTEK DRIVES Extended I/O Plug In Option Module, for P2, Eco; OPT-2-EXTIO-IN
OPT-2-EXTIO-IN is an extended input/output module providing an additional three digital inputs and one relay output.
-
(In stock)
6.542,49
INVERTEK DRIVES 230V Logic Input Card, for E3; OPT-LOGIP-23
230V Logic Input Card, for E3; OPT-LOGIP-23
-
(In stock)
7.053,90
INVERTEK DRIVES RS 485 kabl dužine 1m, RJ45 konektori ; OPT-J4510-IN
RS 485 data cable with RJ45 connectors, 3m length.
-
(In stock)
617,22
INVERTEK DRIVES Incremental Encoder Feedback Plug In Option Module (12-30V)
OPT-2-ENCHT-IN is a plug in encoder feedback interface for Optidrive P2 or Optidrive P2 Elevator, allowing closed loop motor control. The interface is compatible
-
(In stock)
5.000,04
INVERTEK DRIVES RJ45 BacNet connector for Optidrive Inverters - OPT-2-BNTSP-IN
The Invertek OPT-2-BNTSP-IN is a BACnet data cable splitter, designed to enable terminal block type connectivity for BACnet communication networks. Both the Optidrive
-
(Out of stock)
5.290,43