EUCHNER Variable magnetic guard locking device CEM-M2-C60-KZ-SE-163252; 163252
Variable magnetic guard locking device CEM-C60 without permanent magnet, plug connector on left Magnetic guard locking for process protection Locking force 650 N...
Price on request
Variable magnetic guard locking device CEM-C60 without permanent magnet, plug connector on left
- Magnetic guard locking for process protection
- Locking force 650 N (without permanent magnet)
- With remanence
- Function expansion for safety switch CES-C04 / CES-C07
- Flexibility through a large selection of safety switches
- Maximum safety level PL e / category 4 for detection of the door position in combination with CES-C04 / CES-C07
- Transponder coding enables high level of protection against tampering
- Simple connection of the solenoid using M12 plug connector, 5-pin
- Yellow LED to indicate voltage at the solenoid
- Nickel-plated solenoid surface with high corrosion resistance
Approvals
Workspace
| Center offset | |
| Transponder detection (typical value at room temperature) | -10 ... +10 mm |
| Solenoid | -2.5 ... +2.5 mm |
Electrical connection values
| Power consumption | 2.4 W |
| Operating voltage DC | |
| UCM | 24 V DC -15% ... +10% |
| Solenoid duty cycle | 100 % |
| Current consumption | 100 mA |
Mechanical values and environment
| Connection type | M12, 5-pin |
| Installation orientation | any |
| Adhesive force | |
| due to remanence | 10 N -25% ... +25% |
| Mechanical life | |
| in case of use as door stop, and 1 Joule impact energy | 1 x 10⁶ |
| Degree of protection | IP65/IP67 |
| Ambient temperature | -25 ... +50 °C |
| Material | |
| Housing | Aluminum |
| Solenoid | Steel, nickel plated |
| Locking force F | |
| (not monitored, in axial direction) at UCM=24 V | 650 N |
| Guard locking principle | Open-circuit current principle |
In combination with safety switch CES-I-AP-U-C04-USI-115150, CES-I-AP-U-C04-SK-115324, CES-I-AP-U-C04-USB-116502, CES-I-AP-U-C04-U05-116503, CES-I-AP-U-C04-U10-116504, CES-I-AP-U-C04-U20-116505, CES-I-AP-M-C04-USI-117323, CES-I-AP-M-C04-USB-117324, CES-I-AP-M-C04-SK-117325, CES-I-AP-M-C04-U05-117328, CES-I-AP-M-C04-U10-117329, CES-I-AP-M-C04-U20-117330, CES-I-AR-U-C04-SG-119469, CES-I-AR-U-C04-U05-119470, CES-I-AR-U-C04-U10-119471, CES-I-AR-U-C04-U20-119472, CES-I-AR-U-C04-USA-119473, CES-I-AR-M-C04-SG-119474, CES-I-AR-M-C04-U05-119475, CES-I-AR-M-C04-U10-119476, CES-I-AR-M-C04-U20-119477, CES-I-AR-M-C04-USA-119479, CES-I-AP-M-C04-USI-160832, CES-I-AR-F-C04-SG-161679, CES-I-AP-M-C04-USI-162592
| Secured switch-off distance sar | max. 40 mm |
| Secured switching distance sao | |
| with center offset m=0 | min. 5 mm |
In combination with safety switch CES-I-BP-M-C07-SB-160076, CES-I-BP-U-C07-SB-160080, CES-I-BR-U-C07-SA-157920, CES-I-BP-M-C07-SI-162813, CES-I-BP-U-C07-SI-162815, CES-I-BR-M-C07-SA-156233, CES-I-BR-S-C07-SA-165914
| Secured switch-off distance sar | max. 17 mm |
| Secured switching distance sao | |
| with center offset m=0 | min. 2 mm |
Similar products:
EUCHNER Variable magnetic guard locking device CEM-M2-C60-PZ-SE-165746; 165746
Variable magnetic guard locking device CEM-C60 with permanent magnet, plug connector on right Magnetic guard locking for process protection Guard locking solenoid
-
(Out of stock)
Price on request
EUCHNER Variable magnetic guard locking device CEM-M2-C60-PZ-SE-161320; 161320
Variable magnetic guard locking device CEM-C60 with permanent magnet, plug connector on left Magnetic guard locking for process protection Guard locking solenoid
-
(Out of stock)
Price on request
EUCHNER Transponder-coded safety switch CTP-LBI-AP-U-HA-AZ-SA-127798; 127798
Transponder-coded safety switch CTP-LBI-AP, M12 Safety switch with guard locking and integrated evaluation electronics Short circuit monitoring 2 safety outputs
-
(Out of stock)
Price on request
EUCHNER Transponder-coded safety switch CTP-L1-AP-U-HA-ZZ-SII-136625; 136625
Transponder-coded safety switch CTP-AP, 2 x M12 Safety switch with guard locking and integrated evaluation electronics Direct connection to decentralized peripheral
-
(Out of stock)
Price on request
EUCHNER Safety switch CTP-L1-AS – with AS-i connection, plug connector M12 ; 124987
Safety switch CTP-L1-AS – with AS-i connection, plug connector M12 (closed-circuit current principle) Safety switch with guard locking and integrated evaluation
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switch CET-AR-..., RC18, with escape release ; 110943
Non-contact safety switch CET-AR-..., RC18, with escape release Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N
-
(Out of stock)
Price on request