EUCHNER IO-Link Gateway with relay outputs for BP/BR switches ESM-CB-AZ-FI2-BR-IO-158875; 158875
IO-Link Gateway with relay outputs for BP/BR switches IO-Link device for reading process and device data of BP/BR safety switches and transferring them to a higher-level...
Price on request
IO-Link Gateway with relay outputs for BP/BR switches
- IO-Link device for reading process and device data of BP/BR safety switches and transferring them to a higher-level control system
- Control of guard locking of BP/BR switches, depending on the switch used
- Compact version measuring only 18 mm in width
- Rail mounting
- LED status indicators
- Sensor circuit 1: connection of single- or dual-channel safety switches with floating contacts; short circuit, earth fault and ground fault detection
- Sensor circuit 2: connection of 2 safety outputs for BP/BR switches
- Use as safety relay with two safe outputs
- Start button and feedback loop can be connected
- Safety relay: use up to category 4 according to EN ISO 13849-1
Approvals
Operating and display elements
| LED display | 1x operating voltage display PWR, 5x status displays DIA, STATE1, STATE2, K1/K2, IO-Link |
Electrical connection values
| Power consumption | |
| at 24 V DC | 1.44 W |
| Connection cross section | 0.2 ... 1.5 mm² |
| Rated insulation voltage Ui | 320 V |
| Rated impulse withstand voltage Uimp | |
| Leakage path/air gaps | 4 kV |
| Duty cycle | 100 % |
| Overvoltage category according to IEC EN 60664-1 | 2 |
| Power dissipation | max. 6.45 W |
| Degree of contamination (external, according to EN 60947-1) | 2 |
Mechanical values and environment
| Stripping length | 8 mm |
| Dimensions | 17.5 x 116.5 x 114.5 |
| Connection type | plug-in spring terminals |
| Type specification | Electromechanical relay with positively driven contacts according to IEC/EN 61810-3 (EN 50205) |
| Installation orientation | vertical or horizontal |
| Atmospheric humidity | max. 75 % rH |
| Mounting type | Mounting rail 35 mm according to DIN EN 60715 TH35 |
| Degree of protection | |
| IP20 | |
| IP54 | |
| Ambient temperature | |
| (operation) | -25 ... +60 °C |
| Material | |
| Housing | PBT, gray |
| Contact | AgSnO2 |
| permissible shock and vibration load | 10 Hz...150 Hz, 2 g |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| Mission time | 20 y |
| Category | |
| according to EN ISO 13849 | 4 |
| Performance Level | |
| according to EN ISO 13849 | |
| PFD | |
| for IEC 61508 – low demand | 3,76 x 10-5 |
| PFHD | |
| for IEC 61508 – high demand | 1.00 x 10-9 |
| SIL CL | 3 |
Miscellaneous
| ESPE type | Type A |
Similar products:
EUCHNER IO-Link Gateway for BP/BR switches GWY-CB-1-BR-IO-165049; 165049
IO-Link Gateway for BP/BR switches IO-Link device for reading process and device data of BP/BR safety switches and transferring them to a higher-level control system
-
(Out of stock)
Price on request
EUCHNER Transponder-coded safety switch CTS-C1-BP-CC-FLX-AP-VSA-169052; 169052
Transponder-coded safety switch CTS-C1-BP with FlexFunction, M12 Up to category 4 / PL e according to EN ISO 13849-1 Closed-circuit current principle Connecting
-
(Out of stock)
Price on request
EUCHNER Transponder-coded safety switch CTP-L1-AR-M-HA-AE-SAB-123308; 123308
Transponder-coded safety switch CTP-AR, 2 x M12, with escape release Safety switch with guard locking and integrated evaluation electronics Up to 20 switches in
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switch CET-AR-..., M12, with Bowden wire ; 110114
Non-contact safety switch CET-AR-..., M12, with Bowden wire Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N Up
-
(Out of stock)
Price on request
EUCHNER AR evaluation unit CES-AR-AES-12 ; 098225
AR evaluation unit CES-AR-AES-12 Central evaluation of an AR switch chain Status of each individual switch can be seen For switch chains of up to 12 devices Four
-
(Out of stock)
Price on request
EUCHNER CTP-L1-AR-M-HA-AE-SH ; 123374
Safety switch with guard locking and safe guard lock monitoring Integrated CES-AR electronics Safety category 4 and PL e according to EN ISO 13849-1 Compatible mounting
-
(Out of stock)
Price on request