Name: Siemens SIMATIC PM1207/1AC/24VDC/2.5A - 6EP1332-1SH71
Brand: Siemens
SKU: 6EP1332-1SH71
Price: 13681.74 RSD
Availability: OutOfStock

0 Compare products

0 View cart

011 257 1922

Siemens SIMATIC PM1207/1AC/24VDC/2.5A - 6EP1332-1SH71

SIMATIC S7-1200 Power Module PM1207 Stabilized power supply input: 120/230 V AC, output: DC 24 V/2,5 A...

Brand: Siemens
Product Code: 6EP1332-1SH71
Availability: Check availability

Price on request

Description
Specification

SIMATIC S7-1200 Power Module PM1207 Stabilized power supply input: 120/230 V AC, output: DC 24 V/2,5 A

Input
type of the power supply network	1-phase AC
supply voltage at AC
● initial value	Automatic range selection
supply voltage
● 1 at AC rated value	120 V
● 2 at AC rated value	230 V
input voltage
● 1 at AC	85 ... 132 V
● 2 at AC	176 ... 264 V
design of input wide range input	No
overvoltage overload capability	2.3 × Vin rated, 1.3 ms
operating condition of the mains buffering	at Vin = 93/187 V
buffering time for rated value of the output current in the event of power failure minimum	20 ms
operating condition of the mains buffering	at Vin = 93/187 V
line frequency
● 1 rated value	50 Hz
● 2 rated value	60 Hz
line frequency	47 ... 63 Hz
input current
● at rated input voltage 120 V	1.2 A
● at rated input voltage 230 V	0.67 A
current limitation of inrush current at 25 °C maximum	13 A
duration of inrush current limiting at 25 °C
● maximum	3 ms
I2t value maximum	0.5 A²·s
fuse protection type	T 3,15 A/250 V (not accessible)
● in the feeder	Recommended miniature circuit breaker: 16 A characteristic B or 10 A characteristic C
Output
voltage curve at output	Controlled, isolated DC voltage
output voltage at DC rated value	24 V
output voltage
● at output 1 at DC rated value	24 V
relative overall tolerance of the voltage	3 %
relative control precision of the output voltage
● on slow fluctuation of input voltage	0.1 %
● on slow fluctuation of ohm loading	0.2 %
residual ripple
● maximum	150 mV
voltage peak
● maximum	240 mV
product function output voltage adjustable	No
type of output voltage setting	-
display version for normal operation	Green LED for 24 V OK
behavior of the output voltage when switching on	No overshoot of Vout (soft start)
response delay maximum	6 s; 2 s at 230 V, 6 s at 120 V
voltage increase time of the output voltage
● typical	10 ms
output current
● rated value	2.5 A
● rated range	0 ... 2.5 A
supplied active power typical	60 W
short-term overload current
● on short-circuiting during the start-up typical	6 A
● at short-circuit during operation typical	6 A
duration of overloading capability for excess current
● on short-circuiting during the start-up	100 ms
● at short-circuit during operation	100 ms
product feature
● bridging of equipment	Yes
number of parallel-switched equipment resources for increasing the power	2
Efficiency
efficiency in percent	83 %
power loss [W]
● at rated output voltage for rated value of the output current typical	12 W
Closed-loop control
relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical	0.3 %
relative control precision of the output voltage load step of resistive load 50/100/50 % typical