Siemens SIMATIC ET 200SP TM ECC 2xPWM ST; 6FE1242-6TM10-0BB1
SIMATIC ET 200SP TM ECC 2xPWM ST Chargecontroller f. conductive charging of electric vehicles according IEC61851 mode 3 for 2 Charging points -30°C...60°C...
Price on request
| SIMATIC ET 200SP TM ECC 2xPWM ST Chargecontroller f. conductive charging of electric vehicles according IEC61851 mode 3 for 2 Charging points -30°C...60°C 2x Control Pilot 2x Plug Present 2x DQ switch contact for contactor; 2x DI read contact for contactor or connector locking; 2x ACT for connector locking suitable for BU Typ BU20-P12+A0+4B and BU20-P12+A4+0B |
| General information | |
| Product type designation | ECC 2x PWM ST |
| HW functional status | 1 |
| Firmware version | V1.04 |
| ● FW update possible | Yes |
| Product description | Technology modules for the conductive AC charging of electric vehicles according to IEC 61851 |
| usable BaseUnits | BU type B0, B1 |
| Number of channels | 2; Acc. to IEC 61851-1 Mode 3 and/or SAE J1772 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V14 SP1 |
| Installation type/mounting | |
| Mounting type | standard rail |
| Mounting position | Horizontal |
| Supply voltage | |
| Type of supply voltage | DC |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes; against destruction |
| Load voltage L+ | |
| ● Rated value (DC) | 24 V |
| Input current | |
| Current consumption, typ. | 40 mA |
| Current consumption, max. | 90 mA |
| Digital inputs | |
| Number of digital inputs | 2; 1 per channel |
| Digital inputs, parameterizable | Yes; 12 V / 24 V |
| Digital input functions, parameterizable | |
| ● Freely usable digital input | No; Readback contact contactor / connector lock |
| Input voltage | |
| ● Type of input voltage | DC |
| ● for signal "0" | <0.2 V (nom) |
| ● for signal "1" | >0.6 V (nom) |
| ● permissible voltage at input, min. | 0 V |
| ● permissible voltage at input, max. | 30 V |
| Cable length | |
| ● unshielded, max. | 30 m |
| Digital outputs | |
| Type of digital output | Transistor |
| Number of digital outputs | 2; 1 per channel |
| short-circuit proof | Yes |
| Short-circuit protection | Yes; electronic/thermal |
| Digital output functions, parameterizable | |
| ● PWM output | Yes; According to IEC 61851 |
| — Number, max. | 2; 1 per channel |
| — Cycle duration, parameterizable | No; 1 kHz |
| ● Connection of a DC motor | Yes; ACT p/n connector locking |
| Switching capacity of the outputs | |
| ● with resistive load, max. | 1.3 A |
| Output voltage | |
| ● Type of output voltage | DC |
| ● Rated value (DC) | 24 V |
| Cable length | |
| ● unshielded, max. | 30 m; when using a PROFIBUS line |
| Analog outputs | |
| Number of analog outputs | 2; Control pilot acc. to IEC 61851-1 and/or SAE J1772 |
| Connection of a DC motor | Yes; Motor for connector lock |
| Protocols | |
| Bus communication | Yes |
| Vehicle communication according to IEC 61851 | Yes; MODE 3 |
| Interrupts/diagnostics/status information | |
| Alarms | |
| ● Diagnostic alarm | Yes |
| Diagnoses | |
| ● Monitoring the supply voltage | No |
| ● Short-circuit | Yes |
| Diagnostics indication LED | |
| ● ERROR LED | Yes; red LED |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| ● Channel status display | Yes; green LED |
| ● for module diagnostics | Yes; green/red DIAG LED |
Similar products:
Siemens F-TM ServoDrive ST; 6BK1136-6AB00-0BU0
SIMATIC F-TM ServoDrive ST, drive controller for servo drives in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,
-
(Out of stock)
Price on request
Siemens F-TM StepDrive ST; 6BK1136-6SB00-0BU0
SIMATIC F-TM StepDrive ST, drive controller for stepper motors in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,
-
(Out of stock)
Price on request
Siemens F-TM ServoDrive HF; 6BK1136-6AB00-0CU0
SIMATIC F-TM ServoDrive HF, drive controller for servo and stepper motors in safety low-voltage area, 24 to 48 V DC power supply of the drive, rated current 5A,
-
(Out of stock)
Price on request
Siemens ET 200SP TM SIWAREX WP351 HF; 7MH4138-6BA00-0CU0
SIMATIC ET 200SP, TM SIWAREX WP351 HF, verifiable weighing module for automatic dosing-, filling-, checking- and totalizing scales, 3xDI, 3xDQ, 1xCI,1xRS485, 1xEthernet,
-
(Out of stock)
Price on request
Siemens ET 200SP, TM PTO 2x24V; 6ES7138-6EB00-0BA0
SIMATIC ET 200SP, TM PTO 2x24 V, interface module for stepper drives, 2 channels pulse train output, PTO: 24 V, 2 DI, 1 DQ 24 V DC per channel, suitable for BU type
-
(Out of stock)
Price on request
Siemens SIMATIC ET 200SP TM ECC PL ST; 6FE1242-6TM20-0BB1
SIMATIC ET 200SP TM ECC PL ST Chargecontroller for conductiv Charging of electric vehicles according DIN SPEC 70121 Charging Mode 4 TEMP:-30°C...60°C 1x
-
(Out of stock)
Price on request