Siemens ET 200SP, AI 2xI 2-/4-Wire ST, PU 1; 6ES7134-6GB00-0BA1
SIMATIC ET 200SP, Analog input module, AI 2xI 2-/4-wire Standard, Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC05, Module diagnostics, 16 bi...
VAT-exclusive price: 18.203,76 |
VAT-inclusive price: 21.844,52 |
| SIMATIC ET 200SP, Analog input module, AI 2xI 2-/4-wire Standard, Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC05, Module diagnostics, 16 bit |
| General information | |
| Product type designation | AI 2xI 2-/4-wire ST |
| HW functional status | from FS04 |
| Firmware version | |
| ● FW update possible | Yes |
| usable BaseUnits | BU type A0, A1 |
| Color code for module-specific color identification plate | CC05 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| ● Measuring range scalable | No |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V13 SP1 |
| ● STEP 7 configurable/integrated from version | V5.5 SP3 |
| ● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| ● PROFINET from GSD version/GSD revision | V2.3 / - |
| Operating mode | |
| ● Oversampling | No |
| ● MSI | No |
| CiR - Configuration in RUN | |
| Reparameterization possible in RUN | Yes |
| Calibration possible in RUN | No |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Input current | |
| Current consumption, max. | 45 mA; without sensor supply |
| Encoder supply | |
| 24 V encoder supply | |
| ● 24 V | Yes |
| ● Short-circuit protection | Yes |
| ● Output current, max. | 50 mA; Total current for both channels (two-wire) |
| Additional 24 V encoder supply | |
| ● 24 V | Yes |
| ● Short-circuit protection | Yes; Module-wise |
| ● Output current, max. | 200 mA; Total current for both channels (four-wire) |
| Power loss | |
| Power loss, typ. | 1.1 W |
| Address area | |
| Address space per module | |
| ● Address space per module, max. | 4 byte; + 1 byte for QI information |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | Type A |
| Selection of BaseUnit for connection variants | |
| ● 1-wire connection | BU type A0, A1 |
| ● 2-wire connection | BU type A0, A1 |
| ● 4-wire connection | BU type A0, A1 |
| Analog inputs | |
| Number of analog inputs | 2 |
| ● For current measurement | 2 |
| permissible input current for current input (destruction limit), max. | 50 mA |
| Cycle time (all channels), min. | 500 µs |
| Input ranges (rated values), currents | |
| ● 0 to 20 mA | Yes; 15 bit |
| — Input resistance (0 to 20 mA) | 130 Ω; 90 ohms with two wires |
| ● -20 mA to +20 mA | Yes; 16 bit incl. sign |
| — Input resistance (-20 mA to +20 mA) | 130 Ω |
| ● 4 mA to 20 mA | Yes; 15 bit |
| — Input resistance (4 mA to 20 mA) | 130 Ω; 90 ohms with two wires |
| Cable length | |
| ● shielded, max. | 1 000 m |
| Analog value generation for the inputs | |
| Measurement principle | Sigma Delta |
| Integration and conversion time/resolution per channel | |
| ● Resolution with overrange (bit including sign), max. | 16 bit |
| ● Integration time, parameterizable | Yes |
| ● Interference voltage suppression for interference frequency f1 in Hz | 16.6 / 50 / 60 Hz / off |
| ● Conversion time (per channel) | 50 ms @ 60 Hz, 60 ms @ 50 Hz, 180 ms @ 16.6 Hz, 500 µs without filter |
| Smoothing of measured values | |
| ● Number of smoothing levels | |
Similar products:
Siemens ET 200SP, AI 8xU Basic; 6ES7134-6FF00-0AA1
SIMATIC ET 200SP, Analog input module, AI 8XU Basic, suitable for BU type A0, A1, Color code CC02, Module diagnostics, 16 bit
-
(Out of stock)
Price on request
Siemens ET 200SP AI Energy Meter CT HF; 6ES7134-6PA01-0CU0
SIMATIC ET 200SP, analog input module, AI Energy Meter CT HF, for 1A or 5A current transformer, with network analysis functions, suitable for BU type U0, channel
-
(Out of stock)
Price on request
Siemens ET 200SP AI Energy Meter RC HF; 6ES7134-6PA21-0CU0
SIMATIC ET 200SP, analog input module, AI Energy Meter RC HF, for Rogowski coils or current/voltage transformer 333 mV, with network analysis functions, suitable
-
(Out of stock)
Price on request
Siemens ET 200SP, AI 8xRTD/TC 2-Wire HF; 6ES7134-6JF00-0CA1
SIMATIC ET 200SP, Analog input module, AI 8xRTD/TC 2-wire High Feature suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.1%
-
(Out of stock)
Price on request
Siemens ET 200SP AI 2 X U/I 2-, 4-Wire HF; 6ES7134-6HB00-0CA1
SIMATIC ET 200SP, Analog input module, AI 2x U/I 2-.4-wire High Feat., suitable for BU type A0, A1, Color code CC05, channel diagnostics, 16 bit, +/-0.1%
-
(Out of stock)
Price on request
Siemens ET 200SP, AI 4XI 2-WIRE 4...20MA HART; 6ES7134-6TD00-0CA1
SIMATIC ET 200SP, analog HART input module, AI 4XI 2-wire HART High Feature suitable for BU type A0, A1, color code CC03, channel diagnostics, 16-bit, +/-0.3%,
-
(Out of stock)
Price on request