Klemsan Energy analyzer KLEA 320P-D, 0-6A CT; 606130
3ph Energy Analyzer KLEA 320P-D by KLEMSAN . Provides energy measurements : Tariffs Current measurements Voltage measurements Power quality More in technical specification...
VAT-exclusive price: 32.835,90 |
VAT-inclusive price: 39.403,09 |
3ph Energy Analyzer KLEA 320P-D by KLEMSAN. Provides energy measurements :
- Tariffs
- Current measurements
- Voltage measurements
- Power quality
| General | LCD Screen | ✔ | |
| Language Support | Turkish, English, Russian | ||
| Battery | ✔ | ||
| Real Time Clock | ✔ | ||
| Password Protection | ✔ | ||
| Current Transformer Ratio | 1 - 5000 | ||
| Voltage Transformer Ratio | 1 - 5000 | ||
| Demand Period | 1-60 min. adjustable | ||
| Connection Type | 3F4T, 3F3T, Aron | ||
| Measurements in Quadrants | 4 | ||
| Number of Measurements in a Period | 512 | ||
| LCD/Display Refresh Period | 1 sec. | ||
| Networks | TT, TN, IT | ||
| Phasor Diagram | ✔ | ||
| Signal Waveforms | ✔ | ||
| Min./Max./Demand Values | ✔ | ||
| Energy Measurement | Number of Tariffs | 2 | |
| Multi Sub-Tariffs (Peak, Day and Off-Peak) | ✔ | ||
| 3Ø Phase Energy Meters | ✔ | ||
| 4 Quadrant Reactive Energy Meters | ✔ | ||
| Current Measurement Input | Measurement Range | 10mA - 6A AC | |
| Overvoltage Category | 300 V Cat II | ||
| Measurement Surge Voltage | 2 kV | ||
| Power Consumption | <0.2 VA | ||
| Intermittent Overload | 100 A for 1 sec. | ||
| Sampling Frequency between 45-65 Hz | 25.6 kHz | ||
| Voltage Measurement Input | Overvoltage Category | 300 V Cat III | |
| Measured Range L-N | 1-300 Vrms | ||
| Measured Range L-L | 2-500 Vrms | ||
| Measured Frequency Range | 45-65 Hz | ||
| Power Consumption | <0.1 VA | ||
| Sampling Frequency between 45-65 Hz | 25.6 kHz | ||
| Power Quality Measurements | Harmonics for Current and Voltage Phases | Up to 51st | |
| THD - Voltage in % | ✔ | ||
| THD - Current in % | ✔ | ||
| Measurement Accuracy | According to IEC 61557-12 | Total Active Power | Class 0.2 |
| Total Reactive Power | Class 1 | ||
| Total Apparent Power | Class 0.2 | ||
| Total Active Energy | Class 0.5 | ||
| Total Reactive Energy | Class 2 | ||
| Frequency | Class 0.05 | ||
| Current | Class 0.2 | ||
| Neutral Current | Class 0.5 | ||
| Voltage | Class 0.2 | ||
| Power Factor | Class 0.5 | ||
| THDV, THDI | Class 1 | ||
| According to IEC 62053-22 | Total Active Energy | Class 0.2S | |
| According to IEC 62053-23 | Total Reactive Energy | Class 2 | |
| Inputs and Outputs | Alarm Relay Outputs | Number of Outputs | 2 |
| Type | NO (SPST) | ||
| Max. Switching Current | 10 A | ||
| Max. Switching Voltage | 250 VAC | ||
| Max. Switching Power | 1250 VA | ||
| Digital Inputs | Number of Inputs | 2 | |
| Minimum Counting Frequency | 100 Hz, 10 ms | ||
| Input Present or Not | Dry Contact | ||
| Isolation Level | 5000 Vrms | ||
| Digital Outputs | Number of Outputs | 2 | |
| Type | Transistör | ||
| Switching Voltage Range | 5-30 VDC | ||
| Minimum Switching Frequency | 20 Hz, 50 ms | ||
| Isolation Level | 5000 Vrms | ||
| Analog Outputs | Number of Outputs | --- | |
| Range of Outputs 0-5 V, 0-10 V, -5-5 V, -10-10V, 0-20 mA, 4-20 mA | --- | ||
| Isolation | --- | ||
| Supply | Voltage | AC | 85-300V |
| DC | 85-300V | ||
| Consumption | AC | <3VA | |
| DC | <2.5W | ||
| Supply | Frequency | 45-65Hz | |
| Data Logging with timestamp | Min./Max./Avg. Values | Hourly Records | 1920 Hours x 68 Different Paramaters |
| Daily Records | 240 Days x 68 Different Paramaters | ||
| Monthly Records | 36 Months x 68 Different Parameters | ||
| Data Logging with timestamp | Demand | 4 Months x 16 Different Parameters | |
| Alarm Records | 50 | ||
| Communication | Protocol | Modbus RTU | |
| Baud Rate | 2400-115200 bps adjustable | ||
| Parity Number | None | ||
| Stop Bit | 1 | ||
| Address | 1-247 | ||
| Isolation | 2750V RMS | ||
| Mechanical Properties | Weight (g) | 404 g | |
| Protection Class | Front IP40 / Rear IP20 | ||
| Mounting Type | Pano Montaj | ||
| Cable Cross Sections | Supply, Voltage, Current, Relay Outputs | Stranded: | 2.5mm² - 14AWG |
| Solid: | 4mm² - 12AWG, 2x1.5mm² - 2x16AWG | ||
| Digital I/O, RS 485, Analog Output | Stranded: | 1.5mm² - 16AWG | |
| Solid: | 1.5mm² - 16AWG, 2x0.75mm² - 2x18AWG | ||
| Ambient Conditions | Operating Temperature | -20 to +70°C | |
| Storing Temperature | -30 to +80°C | ||
| Relative Humidity (No Condensation) | Maks. 95% | ||
| EMC-EMI | 300 VAC CAT II according to IEC 61010-1 | ✔ | |
| EN 55011/A1:2010, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN61000-4-11 | |||
Similar products:
Klemsan Mrežni analizator KLEA 220P-EN, 0-6A CT; 606160
Energy Analyzers KLEA 220P-EN; 606160
-

(In stock)
28.046,31
Klemsan Mrežni analizator POWYS 3121, 0-6A CT; 606305
POWYS can measure 3 phases and 1 phase in electrical networks. It is an advanced network analyzer that can provide control thanks to 2 relay, digital inputs and
-

(In stock)
31.676,71
Klemsan 3Ø Energy Analyzer KLEA 406R, 0-6A CT; 606702
Klemsan 3Ø Energy Analyzer KLEA 406R; 606702
-

(Out of stock)
32.396,21
Klemsan Mrežni analizator POWYS 3111, 0-6A CT; 606304
POWYS can measure 3 phases and 1 phase in electrical networks. It is an advanced network analyzer that can provide control thanks to 2 relay, digital inputs and
-

(In stock)
32.995,79
Klemsan Energy analyzer KLEA 320P, 0-6A CT ; 606100
3ph Energy Analyzer KLEA 320P by KLEMSAN . Provides energy measurements : Tariffs Current measurements Voltage measurements Power quality More in technical specification
-

(In stock)
36.297,02
Klemsan Energy analyzer KLEA 370P-D, 0-6A CT; 606131
3ph Energy Analyzer KLEA 370P-D by KLEMSAN . Provides energy measurements : Tariffs Current measurements Voltage measurements Power quality More in technical specification
-

(Out of stock)
42.894,77