Helmholz SSW7-HMI, MPI adapter with HMI protocol, incl. manual
The transfer rate of the adapter is set by the protocol (from 4.8 to 115 kbps). The SSW7-HMI is supplied with voltage via the MPI bus of the CPU. With an optional...
Out of stock
The transfer rate of the adapter is set by the protocol (from 4.8 to 115 kbps).
The SSW7-HMI is supplied with voltage via the MPI bus of the CPU. With an optional 24 V connection, it can be used anywhere else in the system.
We provide the SSW7-HMI with an additional programming interface on the connector, including a switchable terminating resistor.
Parameterization and diagnostic functions are possible using the SHTools software.
For a firmware update, download the latest SHTools version for free.
The SSW7-HMI is supplied with voltage via the MPI bus of the CPU. With an optional 24 V connection, it can be used anywhere else in the system.
We provide the SSW7-HMI with an additional programming interface on the connector, including a switchable terminating resistor.
Parameterization and diagnostic functions are possible using the SHTools software.
For a firmware update, download the latest SHTools version for free.
| General information | ||
|---|---|---|
| Order number | 700-751-9VK21 | |
| Article name | SSW7-HMI, MPI adapter with HMI protocol | |
| Scope of delivery | SSW7-HMI, manual | |
| Dimensions (DxWxH) | 105 x 53 x 29 mm | |
| Weight | approx. 180 g | |
| Supply voltage | 24 V DC, 18...30 V | |
| Current draw | approx. 70 mA | |
| MPI interface | ||
| Type | RS485 | |
| Transmission rate | 187,5 kbps | |
| Connection |
SUB-D, 9 pin with PG interface and terminating resistor |
|
| Communication interface | ||
| Type | RS232 | |
| Transmission rate | 4,8...115,2 kbit/s | |
| Protocol | HMI | |
| Connection | Connector, SUB-D, 9 pin | |
| Protection rating | IP 20 | |