EUCHNER STA-Twin with door monitoring control ; 105617
The robust metal safety switch STA is physically compatible with the proven EUCHNER safety switches TP and STP in the plastic housing. Due to its die-cast aluminum...
The robust metal safety switch STA is physically compatible with the proven EUCHNER safety switches TP and STP in the plastic housing. Due to its die-cast aluminum housing and the high degree of protection, IP 67, the switch can withstand even extreme ambient conditions. Like the switches TP and STP, the safety switch STA also has guard locking and guard lock monitoring. A large selection of switching elements is available. The switching contacts switch a minimum current of 1 mA. The safety switch STA is therefore also suitable for use in safe control systems.
Features
- Robust design
- Three cable entries
- High degree of protection IP 67
- LED optional
- Actuacting heads made of metal
- Simultaneous monitoring of two safety doors
- Auxillary release of the front
- With door monitoring control
Approvals
Mechanical values and environment
| Housing material | Alloy - die-cast |
| Weight | |
| Net | 0,6 kg |
| Ambient temperature | -20 ... 55 °C |
| Degree of protection | IP67 |
| Mechanical life | 1 x 106 |
| Contact material | Silver alloy, gold flashed |
| Switching principle | Slow-action switching contact |
| Installation orientation | Any |
| Number of door position NC contacts | 1 |
| Number of guard lock monitoring positively driven contacts | 2 |
| Number of guard lock monitoring NO contacts | 1 |
| Connection | |
| 3 x | M20 x 1.5 |
| Approach speed | max.20 m/min |
| Actuation frequency | max.1200 1/h |
| Guard locking principle | Closed-circuit current principle |
| Locking force Fmax | 2500 N |
| Locking force FZh | 2000 N |
| Retention force | 20 N |
| Extraction force | 30 N |
| Actuating force | 35 N |
| Insertion depth | min.24,5 mm |
Electrical connection ratings
| Thermal rated current Ith | 4 A |
| Utilization category according to EN 60947-5-1 | |
| AC-15 | 4A 230V |
| DC-13 | 4A 24V |
| Solenoid operating voltage | |
| AC/DC | 24 V -15% ... +10% |
| Short circuit protection according to IEC 60269-1 | |
| (Fuse) | 4A gG |
| Rated insulation voltage Ui | 250 V |
| Rated impulse withstand voltage Uimp | 2,5 kV |
| Switching voltage | |
| Min. at 10mA | 12 V |
| Switching current | |
| Min. at 24V | 1 mA |
| Power consumption | 8 W |
| Solenoid duty cycle | 100 % |
| Connection cross-section | 0,34 ... 1,5 mm² |
Reliability values according to EN ISO 13849-1
| Monitoring of guard locking and the safety guard position | |
| B10D | 4,5 x 106 |
| Control of the guard locking | |
| Category | Depending on external control of guard locking |
| Performance Level | Depending on external control of guard locking |
| PFHD | Depending on external control of guard locking |
In combination with Actuator BETAETIGER-S-GT-SN
Mechanical values and environment
| Overtravel | 5 mm |
-
EU Declaration of Conformity
-
opertating instructions safety switches with guard locking
Similar products:
EUCHNER Safety switch STA3A-4141A024RC18; 100029
(Out of stock)
EUCHNER Safety switch STA3A-4141A024SEM4AS1; 098993
(Out of stock)
EUCHNER Safety switch TZ1LE024M-R; 083164
(Out of stock)
EUCHNER Safety switch STA-TW-3A-2131AC024M-S1; 105888
(Out of stock)
EUCHNER Safety switch STA1A-4131A024M; 096439
(Out of stock)
EUCHNER Safety switch STA3A-4141A024M; 099274
(Out of stock)