Name: Schneider Electric Relej za kontrolu struje RM35-J - opseg 2..500 mA;RM35JA31MW
Brand: Schneider Electric
SKU: RM35JA31MW
Price: 17002.80 RSD
Availability: OutOfStock

0 Compare products

0 View cart

011 257 1922

Schneider Electric Relej za kontrolu struje RM35-J - opseg 2..500 mA;RM35JA31MW

Harmony, Modular 1-phase current control relay, 5 A, 2 CO, 2…500 mA, , 24…240 V AC/DC...

Brand: Schneider Electric
Product Code: RM35JA31MW
Availability: Check availability

VAT-exclusive price: 14.169,00

VAT-inclusive price: 17.002,80

Qnt:

Harmony, Modular 1-phase current control relay, 5 A, 2 CO, 2…500 mA, , 24…240 V AC/DC

Main
range of product	Zelio Control
product or component type	Current control relay
relay type	Current control relay
relay name	RM35JA
relay monitored parameters	Overcurrent or undercurrent in window mode Overcurrent or undercurrent detection
time delay	Adjustable 1...20 s, 0 + 10 % on energisation Ti Adjustable 0.3...30 s, 0 + 10 % on crossing the threshold Tt
switching capacity in VA	1250 VA
minimum switching current	10 mA at 5 V DC
maximum switching current	5 A AC
maximum power consumption in VA	3.5 VA AC
measurement range	10...100 mA E2-M terminals 2...20 mA E1-M terminals 2...500 mA current 50...500 mA E3-M terminals
utilisation category	AC-12 conforming to IEC 60947-5-1 AC-13 conforming to IEC 60947-5-1 AC-14 conforming to IEC 60947-5-1 AC-15 conforming to IEC 60947-5-1 DC-12 conforming to IEC 60947-5-1 DC-13 conforming to IEC 60947-5-1 DC-14 conforming to IEC 60947-5-1
contacts type and composition	2 C/O

Complementary
reset time	1500 ms time delay
maximum switching voltage	250 V AC
[Us] rated supply voltage	24...240 V AC/DC 50/60 Hz +/- 10 %
supply voltage limits	20.4…264 V AC/DC
operating voltage tolerance	- 15 % + 10 % Un
maximum power consumption in W	0.6 W DC
control circuit frequency	40...70 Hz +/- 10 %
resistance across terminals	1 Ohm at E2-M terminals 5 Ohm at E1-M terminals 0.2 Ohm at E3-M terminals
output contacts	2 C/O
nominal output current	5 A
maximum measuring cycle	30 ms measurement cycle as true rms value
hysteresis	5…50 % of threshold setting
delay at power up	0.3 s
measurement accuracy	+/- 10 % of the full scale value
repeat accuracy	+/- 0.5 % for input and measurement circuit +/- 2 % for time delay
measurement error	0.05 %/°C with temperature variation 1 by volt over the whole range with voltage variation
polarity	No DC
threshold setting	10...100 %
marking	CE : EMC 89/336/EEC CE : 73/23/EEC
overvoltage category	III conforming to IEC 60664-1
insulation resistance	> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5 > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1 > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5 > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1 > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5 > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
[Ui] rated insulation voltage	250 V conforming to IEC 60664-1
operating position	Any position without derating
connections - terminals	Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
tightening torque	0.6…1 N.m conforming to IEC 60947-1
housing material	Self-extinguishing plastic
local signalling	LED (green) for power ON LED (yellow) for relay ON
mounting support	35 mm symmetrical DIN rail conforming to EN/IEC 60715
electrical durability	100000 cycles
mechanical durability	30000000 cycles