WALTHER-WERKE WALLBOX SLIM-LINE KEY WITH ONE CHARGING POINT TYPE 2 VON 16A/11KW BIS 32A/22KW AND BASIS MONITORING ; 98210013
WALTHER Wallbox SLIM-LINE of the new product generation in compact plastic housing for private and semi-public areas. Wallbox with system integration KEY / RFID...
Out of stock
WALTHER Wallbox SLIM-LINE
of the new product generation in compact plastic housing for private and semi-public areas. Wallbox with system integration KEY / RFID in stand-alone mode according to the charging of electric vehicles. IEC 61851, wired ready for connection, with the following important features and functions: Charging point 1 Charging socket type 2 up to 32A / 22kW, with electromechanical interlock for charging according mode 3, automatic switching over 32A / 22kW to 16A / 11kW, suitable for the used charging cable, Residual current device (FI/RCD) type A, 4-pole 40/0,03A, with accessory device for detecting and shut down by DC fault-current greater than 6 mA, Miniature circuit breaker (LS/MCB) 3-pole+N 32A C and 3-pole+N 16A C Systems integration KEY in the stand-alone operation On-Off switch of the charging point type 2 via key switch Signaling of operating statuses via LED-signal lamp WALTHER basis monitoring via LAN-connection and webbrowser: Displays the status of the charging points Housing made of polyester Housing black (similar to RAL 9005) Dimensions HxWxD approx. 600 x 250 x 150mm Weight approx. 19kg Degree of protection IP 44 Connecting power max. 22kVA Connecting terminal up to 2x5x25qmm Frontside film-coated with WALTHER-Design
of the new product generation in compact plastic housing for private and semi-public areas. Wallbox with system integration KEY / RFID in stand-alone mode according to the charging of electric vehicles. IEC 61851, wired ready for connection, with the following important features and functions: Charging point 1 Charging socket type 2 up to 32A / 22kW, with electromechanical interlock for charging according mode 3, automatic switching over 32A / 22kW to 16A / 11kW, suitable for the used charging cable, Residual current device (FI/RCD) type A, 4-pole 40/0,03A, with accessory device for detecting and shut down by DC fault-current greater than 6 mA, Miniature circuit breaker (LS/MCB) 3-pole+N 32A C and 3-pole+N 16A C Systems integration KEY in the stand-alone operation On-Off switch of the charging point type 2 via key switch Signaling of operating statuses via LED-signal lamp WALTHER basis monitoring via LAN-connection and webbrowser: Displays the status of the charging points Housing made of polyester Housing black (similar to RAL 9005) Dimensions HxWxD approx. 600 x 250 x 150mm Weight approx. 19kg Degree of protection IP 44 Connecting power max. 22kVA Connecting terminal up to 2x5x25qmm Frontside film-coated with WALTHER-Design
Installation side connection model
3-phase
Number of charging units
1
Max. power per charging point
22 kW
Nominal connection power
22 kW
Width
250 mm
Height
600 mm
Depth
150 mm
Mounting method
Wall mounting
Number of socket outlets Type 2
1
Number of earth leakage circuit breakers type A
1
With circuit breaker
✓
With communication interface
✓
Function access control
✓
Material housing
Aluminium
Degree of protection (IP)
IP44
Impact strength
IK07