WALTHER-WERKE WALLBOX EVOLUTION 350 KEY WITH TWO CHARGING POINTS 1X TYPE 2 32A/22KW AND 1X ISOLATED GROUND RECEPTACLE 16A/3,7KW AND BASIS MONI
WALTHER Wallbox EVOLUTION 350 of the new product generation in designer aluminum housing for private and semi-public areas. Wallbox with system integration KEY in...
Out of stock
WALTHER Wallbox EVOLUTION 350
of the new product generation in designer aluminum housing for private and semi-public areas. Wallbox with system integration KEY in stand-alone mode according to the charging of electric vehicles IEC 61851, wired ready for connection, with the following important features and functions: Charging point 1 Charging socket type 2 - 32A / 22kW, with electromechanical interlock for charging according mode 3, Residual current device (FI/RCD) type A, 4-pole 40/0,03A, with accessory device for detecting and shut down by DC fault-current greater than 6 mA, Miniature circuit breaker (LS/MCB) 3-pole 32A C Charging point 2 Household socket - 16A / 3,7kW, with presence detection during connected plug, Residual current device/Miniature circuit breaker combination (FI/LS / RCBO), 2-pole consisting of (FI/RCD) type A, 16/0,03A and (LS/MCB) 16A C Systems integration KEY in the stand-alone operation On-Off switch of the charging points via key switch Signaling of operating statuses via LED-signal lamp The listed charging points cannot be used at the same time WALTHER basis monitoring via LAN-connection and webbrowser: Displays the status of the charging points Housing made of aluminium, powder-coated corpus pure white (RAL 9010), door, flashback and panel jet black (RAL 9005) Dimensions HxWxD approx. 436 x 330 x 187mm Weight approx. 17kg Degree of protection IP 44 Connecting power max. 22kVA Connecting terminal up to 5x10qmm Wall mounting assembly inclusive
of the new product generation in designer aluminum housing for private and semi-public areas. Wallbox with system integration KEY in stand-alone mode according to the charging of electric vehicles IEC 61851, wired ready for connection, with the following important features and functions: Charging point 1 Charging socket type 2 - 32A / 22kW, with electromechanical interlock for charging according mode 3, Residual current device (FI/RCD) type A, 4-pole 40/0,03A, with accessory device for detecting and shut down by DC fault-current greater than 6 mA, Miniature circuit breaker (LS/MCB) 3-pole 32A C Charging point 2 Household socket - 16A / 3,7kW, with presence detection during connected plug, Residual current device/Miniature circuit breaker combination (FI/LS / RCBO), 2-pole consisting of (FI/RCD) type A, 16/0,03A and (LS/MCB) 16A C Systems integration KEY in the stand-alone operation On-Off switch of the charging points via key switch Signaling of operating statuses via LED-signal lamp The listed charging points cannot be used at the same time WALTHER basis monitoring via LAN-connection and webbrowser: Displays the status of the charging points Housing made of aluminium, powder-coated corpus pure white (RAL 9010), door, flashback and panel jet black (RAL 9005) Dimensions HxWxD approx. 436 x 330 x 187mm Weight approx. 17kg Degree of protection IP 44 Connecting power max. 22kVA Connecting terminal up to 5x10qmm Wall mounting assembly inclusive
Installation side connection model
3-phase
Number of charging units
2
Max. power per charging point
22 kW
Nominal connection power
22 kW
Width
365 mm
Height
445 mm
Depth
187 mm
Mounting method
Wall mounting
Number of socket outlets Type 2
1
Number of household socket outlets
1
Number of earth leakage circuit breakers type A
1
With circuit breaker
✓
With communication interface
✓
With load management
✓
Material housing
Aluminium
Degree of protection (IP)
IP44
Impact strength
IK07