Schneider Electric Regularno napajanje, 100-240V AC, 24V 5 A, monofazno, optimizovano; ABLS1A24050
Regulated Power Supply, 100-240V AC, 24V 5 A, single phase, Optimized...
Out of stock
Regulated Power Supply, 100-240V AC, 24V 5 A, single phase, Optimized
| range of product |
Modicon Power Supply
|
|
|---|---|---|
| product or component type |
Power supply
|
|
| power supply type |
Regulated switch mode
|
|
| variant option |
Optimized
|
|
| enclosure material |
Aluminium
|
|
| Nominal input voltage |
100...240 V AC single phase
100...240 V AC 2 phases 140...340 V DC |
|
| input voltage limits |
85...264 V AC
120...375 V DC |
|
| rated power in W |
120 W
|
|
| output voltage |
24 V DC
|
|
| power supply output current |
5 A
|
| Nominal network frequency |
50…60 Hz
|
|
|---|---|---|
| Network system compatibility |
TN
TT IT |
|
| maximum leakage current |
1 mA 240 V AC
|
|
| input protection type |
Integrated fuse (not interchangeable) 4 A
External protection (recommended) 20 A Curve C External protection (recommended) 13 A Curve C |
|
| inrush current |
30.0 A at 115 V
60.0 A at 230 V |
|
| power factor |
0.55 at 115 V AC
0.45 at 230 V AC |
|
| efficiency |
85 % at 115 V AC
88 % at 230 V AC |
|
| Output voltage adjustment |
22...28 V
|
|
| power dissipation in W |
25 W
|
|
| current consumption |
< 2.5 A 115 V AC
< 1.4 A 230 V AC < 1.3 A 140 V DC |
|
| Turn-on time |
< 1 s
|
|
| holding time |
> 20 ms 115 V AC
> 40 ms 230 V AC |
|
| Startup with capacitive loads |
8000 µF
|
|
| residual ripple |
< 120 mV
|
|
| Expected capacitor life time |
10 year(s)
|
|
| meantime between failure [MTBF] |
700000 h at 25 °C, full load conforming to SR 332
|
|
| output protection type |
Against overload and short-circuits, protection technology: automatic reset
Against over temperature, protection technology: manual reset Against overvoltage, protection technology: manual reset |
|
| connections - terminals |
Screw connection: 0.5...4 mm², (AWG 20...AWG 12) without wire end ferrule for output
Screw connection: 0.5...2.5 mm², (AWG 20...AWG 14) with wire end ferrule for output Screw connection: 0.75...4 mm², (AWG 18...AWG 12) without wire end ferrule for input Screw connection: 0.75...4 mm², (AWG 18...AWG 12) with wire end ferrule for input |
|
| line and load regulation |
< 0.5 %line
< 1 %load |
|
| status LED |
1 LED (green)output voltage
|
|
| depth |
117.6 mm
|
|
| height |
123.6 mm
|
|
| width |
40 mm
|
|
| net weight |
0.55 kg
|
|
| output coupling |
Parallel
Serial |
|
| mounting support |
Top hat type TH35-15 rail conforming to IEC 60715
Top hat type TH35-7.5 rail conforming to IEC 60715 Double-profile DIN rail |
|
| supply |
SELV conforming to EN/IEC 60950-1
SELV conforming to EN/IEC 60204-1 SELV conforming to IEC 60364-4-41 |
| standards |
EN 62368-1
EN/IEC 61204-3 EN 61000-6-1 EN 61000-6-2 EN 61000-6-3 EN 61000-6-4 EN 61000-3-2 EN 61000-3-3 UL 62368-1 CSA C22.2 No 62368-1 UL 508 CSA C22.2 No 107.1 EN/IEC 62368-1 |
|
|---|---|---|
| product certifications |
CE
CUL listed CUL recognized RCM CB Scheme EAC KC |
|
| environmental characteristic |
3M4 conforming to IEC 60721-3-3
|
|
| operating altitude |
< 5000 m
|
|
| shock resistance |
100 m/s² for 11 ms
|
|
| IP degree of protection |
IP20
|
|
| ambient air temperature for operation |
-20…-10 °C (with current derating of 2 % per °C)
40…70 °C (with current derating of 1.8 % per °C) 50…70 °C (with current derating of 2.5 % per °C) |
|
| ambient air temperature for storage |
-40…85 °C
|
|
| relative humidity |
0…95 % without condensation
|
|
| overvoltage category |
II
|
|
| electrical energy source class conforming to IEC 62368-1 |
ES1
|
|
| electrical shock protection class |
Class I
|
|
| pollution degree |
2
|
|
| vibration resistance |
3 mm (f= 2…9 Hz) conforming to IEC 60068-2-6
10 m/s² (f= 9…200 Hz) conforming to IEC 60068-2-6 |
|
| Electromagnetic immunity |
Immunity to electrostatic discharge - test level: 6 kV (contact discharge) conforming to EN/IEC 61000-4-2
Immunity to electrostatic discharge - test level: 9 kV (air discharge) conforming to EN/IEC 61000-4-2 Immunity to conducted RF disturbances - test level: 10 V/m (80 MHz...2 GHz) conforming to EN/IEC 61000-4-3 Immunity to conducted RF disturbances - test level: 5 V/m (2...2.7 GHz) conforming to EN/IEC 61000-4-3 Immunity to conducted RF disturbances - test level: 3 V/m (2.7...6 GHz) conforming to EN/IEC 61000-4-3 Immunity to fast transients - test level: 4 kV (on input-output) conforming to EN/IEC 61000-4-4 Surge immunity test - test level: 3 kV (between power supply and earth) conforming to EN/IEC 61000-4-5 Surge immunity test - test level: 1.5 kV (between phases) conforming to EN/IEC 61000-4-5 Immunity to conducted RF disturbances - test level: 10 V (0.15...80 MHz) conforming to EN/IEC 61000-4-6 Immunity to magnetic fields - test level: 30 A/m (50...60 Hz) conforming to EN/IEC 61000-4-8 Immunity to voltage dips conforming to EN/IEC 61000-4-11 Disturbing field emission conforming to EN 55016-2-3 Limits for harmonic current emissions conforming to EN 61000-3-2 Conducted disturbance emission conforming to EN 55016-1-2 Conducted disturbance emission conforming to EN 55016-2-1 |
|
| electromagnetic emission |
Conducted emissions conforming to EN 61000-6-3
Radiated emissions conforming to EN 61000-6-4 |
|
| dielectric strength |
3000 V AC input to output
|
| Sustainable offer status |
Green Premium product
|
|
|---|---|---|
| REACh Regulation | ||
| EU RoHS Directive |
Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration |
|
| Mercury free |
Yes
|
|
| RoHS exemption information | ||
| China RoHS Regulation | ||
| Environmental Disclosure | ||
| Circularity Profile | ||
| WEEE |
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
|
|
| California proposition 65 |
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
|
-
Phaseo ABL7 ABL8 ABLS1A24050