Harmony SCU

Small touch HMI controller

3.5 inch

with backlit LED colour TFT LCD

Analogue

Complete product

320 x 240 pixels QVGA

50000 hours with 65000 colours

16 levels via touch panel

60° left
60° right
40° top
60° bottom

Japanese (ANK, Kanji)
ASCII
Taiwanese (traditional Chinese)
Korean
Chinese (simplified Chinese)

External source

24 V (20.4…28.8 V)DC

10 ms

30 A

15 W

No indicator

Limited by internal memory capacity

SoMachine

Harmony

CPU RISC

333 MHz

Flash NAND, 128 MB
Internal data storage FRAM, 128 kB
Application run DRAM, 128 MB

1 serial link - RJ45 - RS232/RS485 (rate: <= 115.2 kbits/s)
1 Ethernet TCP/IP - RJ45
1 USB 2.0 type mini B
1 USB 2.0 type A
CANopen master bus - SUB-D 9

Built-in

CANopen
Modbus TCP/IP
Modbus

By 1 nut - diameter: Ø 22 mm, mounting on: 1...6 mm thick panel

PC/PBT

147 m/s² for 11 ms (on DIN rail) conforming to IEC 60068-2-27
294 m/s² for 6 ms (on panel mounting) conforming to IEC 60068-2-27

+/- 3.5 mm (f = 5…9 Hz) conforming to IEC 60068-2-6
1 gn (f = 9…150 Hz) conforming to IEC 60068-2-6

Electrostatic discharge immunity test - test level: 8 kV (air discharge) conforming to IEC 61000-4-2
Electrostatic discharge immunity test - test level: 6 kV (contact discharge) conforming to IEC 61000-4-2
Susceptibility to electromagnetic fields - test level: 10 V/m (80 MHz...3 GHz) conforming to IEC 61000-4-3
Electrical fast transient/burst immunity test - test level: 2 kV (power lines) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (between analogue I/O and operating voltage) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 2 kV (relay wires) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (Ethernet line) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (COM line) conforming to IEC 61000-4-4
Electrical fast transient/burst immunity test - test level: 1 kV (CAN line) conforming to IEC 61000-4-4
Surge immunity test - test level: 2 kV (power supply (common mode)) conforming to IEC 61000-4-5
Surge immunity test - test level: 1 kV (power supply (differential mode)) conforming to IEC 61000-4-5
Surge immunity test - test level: 1 kV common mode (digital I/O) conforming to IEC 61000-4-5
Surge immunity test - test level: 0.5 kV differential mode (digital I/O) conforming to IEC 61000-4-5
Conducted RF disturbances - test level: 10 V (0.15...80 MHz) conforming to IEC 61000-4-6
Conducted emission - test level: 150 kHz...30 MHz conforming to EN 55011
Radiated emission - test level: 30 MHz...1 GHz conforming to EN 55011

2 for fast input (normal mode) conforming to IEC 61131-2 Type 1
14 for digital input conforming to IEC 61131-2 Type 1

24 V DC, discrete input logic: sink or source (positive/negative)

1 for fast input (HSC mode)
2 for digital input

7.83 mA for fast input
5 mA for digital

2.81 kOhm
4.7 kOhm

15…28.8 V DC >= 15 V, current (state 1): >= 5 mA <= 5 V, current (state 0): <= 1.5 mA
15…28.8 V DC >= 15 V, current (state 1): >= 2.5 mA <= 5 V, current (state 0): <= 1 mA

0 ms no filter (none)
0.004...0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2))
3...12 ms integrator (none/run/stop)

100 kHz for fast input (encoder mode) - control type A/B
100 kHz for fast input - control type single phase
100 kHz for fast input - control type pulse/direction

Shielded cable: <10 m for fast input
Shielded cable: <100 m for digital input
Unshielded cable: <50 m for digital input

3.5 mm

With overvoltage protection

500 V DC

None

2 fast output (normal mode), output logic: source
8 digital output, output logic: source

24 V DC (voltage limit: 19.2...28.8 V) with transistor discrete output(s)
24 V DC (voltage limit: 5...30 V) with relay discrete output(s)
220 V AC (voltage limit: 100...250 V) with relay discrete output(s)

2 for fast input, terminal(s): FI0...FI1
14 for digital input, terminal(s): DI0...DI13
2 for fast output, terminal(s): FQ0...FQ1
8 for digital output, terminal(s): DQ0...DQ7

2 A 4 A), response time 5 ms with opening contact for digital output
2 A 4 A), response time 2 ms with closing contact for digital output
300 mA, response time 2 ms for fast output (normal mode)
50 mA, response time 2 ms for fast output (PWM or PTO mode)

> 10 MOhm between the I/O and internal logic
> 10 MOhm between power supply and earth

100 kHz for fast output (PTO mode)
1 kHz for fast output (PWM mode)

+/- 0.1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode)
1 % of full scale cyclic ratio 1...99% for fast output (PWM or PTO mode)
+/- 5 % of full scale cyclic ratio 10...90% for fast output (PWM or PTO mode)
+/- 10 % of full scale cyclic ratio 20...80% for fast output (PWM or PTO mode)
+/- 15 % of full scale cyclic ratio 30...70% for fast output (PWM or PTO mode)

74.95 mm

128 mm

102 mm

0.512 kg

IEC 61000-6-2
FCC Class A
WEEE directive 2002/96/EC
UL 508
EN 61131-2
CSA C22.2 No 213 Class I Division 2
RoHS China SJ/T 11363-2006
RoHS compliant
ANSI/ISA 12-12-01

CULus 508
CUL 1604 Class 1 Division 2
KCC
C-Tick
CULus CSA 22-2 No 142
GOST

CE

0…50 °C

-20…60 °C

5…85 % without condensation

<= 2000 m

0…10000 m

800...1114 hPa

IP20 (rear panel) conforming to IEC 60529
IP65 (front panel) conforming to IEC 60529

NEMA 4X front panel

2 conforming to IEC 60664

Corrosive gas free

1.072 kg

10.200 cm

19.000 cm

26.700 cm

Green Premium product

Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration

Yes

Yes

China RoHS declaration

Product Environmental Profile

End of Life Information

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins