Dimensions W x H x D (mm) Cut out W x H (mm)

Weight

410 x 250 x 104

387 x 228

ca. 1.900 g

Operating temperature range Storage temperature range

0°C ... +50°C (without condensation)

-20°C ... +60°C

IP-protection class front panel rear side

IP65 IP41

Connection technology

removable connector with 2 lift arms or 2 bolt flanges (cage clamp technology) for cross section up to max. 1,5mm2

Load voltage L+

24V DC (11 V ... 30V DC)

Current consumption Power dissipation

500mA ... 1500mA

12W (typ.) ... 36W (max. with Profinet and full of periphery)

Start-up current

< 3A

Diagonal of display (inch) Display resolution (pixel)

15,6“ (397mm)

1366x768 Pixel  (16:9)

Display unit Operating unit

TFT display with 16Bit colours analog resisitive touch screen

Visualization tool

unit to reference there

VisuStage PC1560T, PC1567T

Technical data

CPU

CPU-type

CPU-T (PC1567T)

Working memory = battery backed load memory Diagnostic buffer

1MB 512 kByte remanent 8MB

100 entries (all remanent)

Flash

internal - for visualization external memory

48 MByte

Micro SD, up to max. 8 GByte (not necessary for S7-program, only for archiving)

OB, FC, FB, DB

Local data

Number of in- and outputs Process image

Number of merkerbytes Number of taktmerker Number of timer, counter Depth of nesting

each 2.048 32kByte (2kByte per block)

in each case 4.096 Byte (32.769 Bit) addressable in each case 4.096 Byte (default set is 128 Byte)

4.096 (remanence adjustable, default set is 0..15) 8 (1 Merkerbyte)

in each case 512 (each remanence adjustable, default set is 0) up to 16 code blocks

Real-time clock elapsed hour counter

yes (accumulator-backed hardware clock) 1 (32Bit, resolution 1h)

Program language Program system

STEP 7® - AWL, KOP, FUP, S7-SCL, S7-Graph from Siemens SIMATIC^® Manager from Siemens or products compatible to it

Operating system Program unit to reference

compatible to S7-300® from Siemens

CPU 315-2DP/PN (6ES7 315-2EH14-0AB0 firmware V3.1 Siemens)

Serial interfaces (protocols)

COM1: RS 232 (free ASCII) COM2: RS 485 (free ASCII, Modbus-RTU)

Ethernet (protocols)

2x Ethernet: (switch or separated ports): 10/100 MBit with parts of CP343 functionality (RFC1006, TCP, UDP, Modbus-TCP)

CAN

(protocols)

CAN-telegrams (Layer 2), compatible to CANopen® master/ slave 10 kBaud ... 1 MBaud

optional interfaces (protocols)

Profinet IO Controller

Onboard periphery

7 slots (optional Profinet uses Slot 1)

Decentral periphery

- INSEVIS- periphery (with automatic configuration via „ConfigStage“)

- diverse external periphery families (Modbus RTU/TCP, CAN)

- all CANopen® slaves according to DS401

- all Profibus DP-V0-slaves