Helmholz Function module – 4 x Counter Economy 24 V, 1 KHz, 32 bit
Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that...
VAT-exclusive price: 11.509,61 |
VAT-inclusive price: 13.811,54 |
Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that therefore need to be pre-processed.
The counter module detects the edges of 24 V signals as pulses. The pulses are counted and the count is always available up to date for the PLC.
The count function can be enabled through PLC control commands.
The count can be preallocated or reset through the PLC.
PLC control functions
- Enable counter
- Reset count
- Load count
- Change count direction
- 4 counters
- Count depth 32 bit (sign-allocated ± 231)
- Up to 1 kHz counting frequency per counter
- 24 V voltage supply for counter
- 9 bytes of input data (count and status)
- 10 bytes of output data (preset count and control functions)
General information | ||
---|---|---|
Order number | 600-300-1AD01 | |
Article name | 4x Counter Economy 24 V, 1 KHz, 32 bit | |
Scope of delivery | 4x Counter Economy 24 V, 1 KHz, 32 bit | |
Dimensions (DxWxH) | 110 x 14 x 73 mm | |
Weight | Approx. 70 g | |
Input voltage | 24 V DC | |
Electrical isolation | ||
from the backplane bus | Yes | |
Between the channels | No | |
Current draw | ||
External | Max. 0 mA | |
Internal | Max. 22 mA | |
Power dissipation | Max. 0.95 W | |
Input characteristic curve | Type 2, EN 61131-2 | |
Number of counters | 4 | |
Counter bit depth | 32 bit, sign allocated +/- 231 | |
Counting frequency per channel | Max. 1 kHz, 1x evaluation, rising edges | |
Counter functions | Forwards/backwards, Load count, Reset count | |
Hot-swap capable | Yes | |
Ambient conditions | ||
Ambient temperature | 0 °C … +60 °C | |
Transport and storage temperature | -20 °C … +80 °C | |
Relative air humidity | 95 % r H without condensation | |
Protection rating | IP 20 | |
Certifications | CE, UL | |
UL | ||
Surrounding Air Temperature | 0 °C … +60°C | |
Pollution degree | 2 | |
CE | ||
Noise immunity | DIN EN 61000-6-2 “EMC Immunity” | |
Interference emission | DIN EN 61000-6-4 “EMC Emission” | |
Vibration and shock resistance | DIN EN 60068-2-8:2008 “Vibration”, DIN EN 60068-27:2010 “Shock“ | |
RoHS | Yes | |
REACH | Yes |
Similar products:
Helmholz Function module – 2 x Counter Economy 24 V, 1 KHz, 32 bit
Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that
-
(Out of stock)
7.371,33
Helmholz Function module – 1 x SSI Encoder interface
In terms of hardware, the module's SSI is implemented as a point-to-point connection as defined in the RS-422 standard. Moreover, in order to avoid ground loops,
-
(Out of stock)
20.562,12
Helmholz Function module – 1 x Counter 24 V, 500 KHz, 32 bit
Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that
-
(Out of stock)
23.148,55
Helmholz Function module – 1 x Counter , 5 V (RS422), 4 MHz, 32 bit
Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that
-
(Out of stock)
23.148,55
Helmholz Function module – Energy Meter, 5 A
The energy meter function module can be used to measure all important current and voltage measurement values on 230 V AC networks. Input voltages (3 phases + N)
-
(Out of stock)
23.148,55
Helmholz Function module – strain gauge weighing module
The weighing module serves the purpose of measuring and processing signals from weight, torque, or force sensors. The weighing module enables the direct connection
-
(Out of stock)
24.441,76