Helmholz - Distributed fieldbus I/O system
Search by features
Helmholz Analog output module – AO 2 x I, 0/4–20mA, 12 Bit
Parameters for the module Diagnostic alarm: On | Off Representation values: SIMATIC* S7 | SIMATIC* S5 Parameters for each channel Wire break detection: On | Off
-
(Out of stock)
16.682,47
Helmholz Analog output module – AO 2 x U, ±10 V, 0–10 V, 1–5 V, 12 Bit
Parameters for the module Diagnostic alarm: On | Off Representation values: SIMATIC* S7 | SIMATIC* S5 Parameters for each channel Wire break detection: On | Off
-
(Out of stock)
16.682,47
Helmholz ''TB20-C, DeviceNet Slave Bus
The DeviceNet Slave bus coupler connects the DeviceNet bus to peripheral modules. As a group 2 server, the coupler supports the “Predefined Master/Slave Connection
-
(Out of stock)
19.268,90
Helmholz Analog input module – AI 2 x U, ±10 V, 0–10 V, 1–5 V, Iso., 16 Bit
Parameters for the module Diagnostic alarm: On | Off Overflow/underflow diagnosis: On | Off Representation values: SIMATIC* S7 | SIMATIC* S5 Parameters for each
-
(Out of stock)
19.915,51
Helmholz Analog input module – AI 4 x I, 0/4–20mA, ±20mA, 12 Bit
Parameters for the module Diagnostic alarm: On | Off Overflow / underflow diagnosis: On | Off Representation values: SIMATIC* S7 | SIMATIC* S5 Parameters for each
-
(Out of stock)
19.915,51
Helmholz Analog input module – AI 2 x I, 0/4–20mA, ±20mA, Iso., 16 Bit
Parameters for the module Diagnostic alarm: On | Off Overflow / underflow diagnosis: On | Off Representation values: SIMATIC* S7 | SIMATIC* S5 Parameters for each
-
(Out of stock)
19.915,51
Helmholz Analog input module – AI 4 x U, ±10 V, 0–10 V, 1–5 V, 12 Bit
Parameters for the module Diagnostic alarm: On | Off Overflow/underflow diagnosis: On | Off Representation values: SIMATIC* S7 | SIMATIC* S5 Parameters for each
-
(Out of stock)
19.915,51
Helmholz Analog input module – AI 2 x U, ±24 V, 0–24 V, 12 Bit
Parameters for the module Diagnostic alarm: On | Off Overflow/underflow diagnosis: On | Off Representation values: SIMATIC* S7 | SIMATIC* S5 Parameters for each
-
(Out of stock)
20.562,12
Helmholz Function module – 1 x SSI Encoder interface
In terms of hardware, the module's SSI is implemented as a point-to-point connection as defined in the RS-422 standard. Moreover, in order to avoid ground loops,
-
(Out of stock)
20.562,12
Helmholz Analog input module – AI 1/2 x R, RTD, 16 Bit, 2/3/4-wire
Parameters for the module Diagnostic alarm: On | Off Overflow/underflow diagnosis: On | Off Representation values: SIMATIC* S7 | SIMATIC* S5 Temperature unit: Celsius
-
(Out of stock)
20.562,12
Helmholz Analog output module – AO 4 x I, 0/4–20mA, 12 Bit
Parameters for the module Diagnostic alarm: On | Off Representation values: SIMATIC* S7 | SIMATIC* S5 Parameters for each channel Wire break detection: On | Off
-
(Out of stock)
20.950,08
Helmholz Analog output module – AO 4 x U, ±10 V, 0–10 V, 1–5 V, 12 Bit
Parameters for the module Diagnostic alarm: On | Off Representation values: SIMATIC* S7 | SIMATIC* S5 Parameters for each channel Wire break detection: On | Off
-
(Out of stock)
20.950,08
Helmholz Analog input module – AI 2 x TC, Iso., 16 Bit
Parameters for the module Diagnostic alarm: On | Off Overflow/underflow diagnosis: On | Off Representation values: SIMATIC* S7 | SIMATIC* S5 (for ±80 mV only)
-
(Out of stock)
21.855,33
Helmholz Function module – 1 x Counter 24 V, 500 KHz, 32 bit
Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that
-
(Out of stock)
23.148,55
Helmholz Function module – 1 x Counter , 5 V (RS422), 4 MHz, 32 bit
Counters are used to detect pulses that are faster than a controller’s cycles, i.e., signals that the controller will be unable to detect properly and that
-
(Out of stock)
23.148,55