WALTHER-WERKE WALLBOX SLIM-LINE RFID WITH ONE CHARGING POINT TYPE 2 16A/11KW, ELECTRIC ENERGY METER AND PREMIUM MONITORING ; 98210037
WALTHER Wallbox SLIM-LINE of the new product generation in compact plastic housing for private and semi-public areas. Wallbox with system integration RFID in stand-alone...
Trenutno nema na stanju
WALTHER Wallbox SLIM-LINE
of the new product generation in compact plastic housing for private and semi-public areas. Wallbox with system integration RFID in stand-alone mode according to the charging of electric vehicles IEC 61851, wired ready for connection, with the following important features and functions: Charging point 1: Charging socket type 2 - 16A / 11kW, with electromechanical interlock for charging according mode 3, Residual current device (RCD) type A, 4-pole 40/0,03A, with accessory device for detecting and shut down by DC fault-current greater than 6 mA, Miniature circuit breaker (MCB) 3-pole 16A C The evaluation of the charging power results from an integrated electric energy meter. This energy meter has direct measurement and is MID certified Warning when incorrect phase sequence Systems integration RFID in the stand-alone operation Identification and clearing of the charging point / points via RFID-medium Integrated RFID administration software for more than 1.000 users. Signaling of operating statuses via LED-signal lamp WALTHER premium monitoring via LAN-connection and webbrowser: Displays loading data (kWh, loading time, time flow of the loading process, data sets), export of loading data sets, Integrated RFID administration software 5 suitable RFID cards are included in the delivery Housing made of polyester Housing black (similar to RAL 9005) Dimensions HxWxD approx. 600 x 250 x 150mm Weight approx. 14kg Degree of protection IP 44 Connecting power max. 11kVA Connecting terminal up to 2x5x25sqmm Frontside film-coated with WALTHER-Design
of the new product generation in compact plastic housing for private and semi-public areas. Wallbox with system integration RFID in stand-alone mode according to the charging of electric vehicles IEC 61851, wired ready for connection, with the following important features and functions: Charging point 1: Charging socket type 2 - 16A / 11kW, with electromechanical interlock for charging according mode 3, Residual current device (RCD) type A, 4-pole 40/0,03A, with accessory device for detecting and shut down by DC fault-current greater than 6 mA, Miniature circuit breaker (MCB) 3-pole 16A C The evaluation of the charging power results from an integrated electric energy meter. This energy meter has direct measurement and is MID certified Warning when incorrect phase sequence Systems integration RFID in the stand-alone operation Identification and clearing of the charging point / points via RFID-medium Integrated RFID administration software for more than 1.000 users. Signaling of operating statuses via LED-signal lamp WALTHER premium monitoring via LAN-connection and webbrowser: Displays loading data (kWh, loading time, time flow of the loading process, data sets), export of loading data sets, Integrated RFID administration software 5 suitable RFID cards are included in the delivery Housing made of polyester Housing black (similar to RAL 9005) Dimensions HxWxD approx. 600 x 250 x 150mm Weight approx. 14kg Degree of protection IP 44 Connecting power max. 11kVA Connecting terminal up to 2x5x25sqmm Frontside film-coated with WALTHER-Design
Installation side connection model
3-phase
Number of charging units
1
Max. power per charging point
11 kW
Nominal connection power
11 kW
Width
600 mm
Height
250 mm
Depth
150 mm
Mounting method
Wall mounting
Number of socket outlets Type 2
1
Number of earth leakage circuit breakers type A
1
With circuit breaker
✓
With communication interface
✓
With energy meter
✓
Material housing
Plastic
Degree of protection (IP)
IP44
Impact strength
IK07